Compressive strength, modulus of elasticity, and water permeability of inorganic polymer concrete

Materials and Design

Volumn 31, Issue 10, 2010, Pages 4748-4754

  Wongpa, J ^a   Kiattikomol, K ^a   Jaturapitakkul, C ^a   Chindaprasirt, P ^b  

^a KING MONGKUT'S UNIVERSITY OF TECHNOLOGY THONBURI   (Thailand)

^b KHON KAEN UNIVERSITY   (Thailand)

Author keywords

A. Composites; A. Concrete; E. Mechanical; Polymer matrix

Indexed keywords

A. CONCRETE; AMBIENT CONDITIONS; CONCRETE MIXTURE; E. MECHANICAL; HIGH CONCENTRATION; LIQUID COMPONENTS; MIX PROPORTIONS; MODULUS OF ELASTICITY; RICE HUSK; SILICA MATERIAL; SODIUM HYDROXIDE SOLUTIONS; SODIUM SILICATE SOLUTIONS; WATER PERMEABILITY;

CONCRETES; ELASTIC MODULI; ELASTICITY; FLY ASH; INORGANIC POLYMERS; POLYMER MATRIX COMPOSITES; SILICA; SILICATES; SODIUM;

COMPRESSIVE STRENGTH;

EID: 77954142552     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2010.05.012     Document Type: Article

References (36)

1. Davidovits J. Geopolymers: inorganic polymeric new materials. J Therm Anal 1991, 37:1633-1656.
2. Davidovits J. Mineral polymers and methods of making them. US patent no. 4349,386; 1982.
3. MacKenzie K.J.D., Komphanchai S., Vagana R. Formation of inorganic polymers (geopolymers) from 2:1 layer lattice aluminosilicates. J Eur Ceram Soc 2008, 28(1):177-181.
4. Davidovits J. 30 Years of successes and failures in geopolymer applications. Market trends and potential breakthroughs. In: Geopolymer conference. Melbourne, Australia; 2002.
5. Hanzlíček T., Steinerová M., Straka P., Perná I., Siegl P., Švarcová T. Reinforcement of the terracotta sculpture by geopolymer composite. Mater Des 2009, 30(8):3229-3234.
6. Lee W.K.W., van Deventer J.S.J. Chemical interactions between siliceous aggregates and low-Ca alkali-activated cements. Compos Concr Res 2007, 27(6):844-855.
7. MacKenzie K.J.D., O'Leary B. Inorganic polymers (geopolymers) containing acid-base indicators as possible colour-change humidity indicators. Mater Lett 2009, 63(2):230-232.
8. Mozgawa W., Deja J. Spectroscopic studies of alkaline activated slag geopolymers. J Mol Struct 2009, 924-926:434-441.
9. Sofi M., van Deventer J.S.J., Mendis P.A., Lukey G.C. Engineering properties of inorganic polymer concrete (IPCs). Compos Concr Res 2007, 37(2):251-257.
10. Duxson P., Mallicoat S.W., Lukey G.C., Kriven W.M., van Deventer J.S.J. The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers. Colloids Surf A 2007, 292(1):8-20.
11. Lee W.K.W., van Deventer J.S.J. The effects of inorganic salt contamination on the strength and durability of geopolymers. Colloids Surf A 2002, 211(2-3):115-126.
12. Yang K.H., Song J.K., Ashour A.F., Lee E.T. Properties of cementless mortars activated by sodium silicate. Constr Build Mater 2008, 22(2):1981-1989.
13. Chindaprasirt P., Jaturapitakkul C., Chalee W., Rattanasak U. Comparative study on the characteristics of fly ash and bottom ash geopolymers. Waste Manag 2009, 29(2):539-543.
14. Duxson P., Provis J.L., Lukey G.C., Mallicoat S.W., Kriven W.M., van Deventer J.S.J. Understanding the relationship between geopolymer composition, microstructure and mechanical properties. Colloids Surf A 2005, 269(1-3):47-58.
15. Andini S., Cioffi R., Colangelo F., Grieco T., Montagnaro F., Santoro L. Coal fly ash as raw material for the manufacture of geopolymer-based products. Waste Manag 2008, 28(2):416-423.
16. Kiattikomol K., Jaturapitakkul C., Songpiriyakij S., Chutubtim S. A study of ground coarse fly ashes with different finenesses from various sources as pozzolanic materials. Cem Concr Compos 2001, 23(4-5):335-343.
17. Cheerarot R., Jaturapitakkul C. A study of disposed fly ash from landfill to replace Portland cement. Waste Manag 2004, 24(7):701-709.
18. Jaturapitakkul C., Kiattikomol K., Sata V., Leekeeratikul T. Use of ground coarse fly ash as a replacement of condensed silica fume in producing high-strength concrete. Cem Concr Res 2004, 34(4):549-555.
19. Tangpagasit J., Cheerarot R., Jaturapitakkul C., Kiattikomol K. Packing effect and pozzolanic reaction of fly ash in mortar. Cem Concr Res 2005, 35(6):1145-1151.
20. Sata V., Jaturapitakkul C., Kiattikomol K. Influence of pozzolan from various by-product materials on mechanical properties of high-strength concrete. Constr Build Mater 2007, 21(7):1589-1598.
21. Tangchirapat W., Buranasing R., Jaturapitakkul C., Chindaprasirt P. Influence of rice husk - bark ash on mechanical properties of concrete containing high amount of recycled aggregates. Constr Build Mater 2008, 22(8):1812-1819.
22. Pacheco-Togal F., Castro-Gomes J., Jalali S. Investigation about the effect of aggregates on strength and microstructure of geopolymeric mine waste mud binders. Cem Concr Res 2007, 37(6):933-941.
23. Sathonsaowaphak A., Chindaprasirt P., Pimraksa K. Workability and strength of lignite bottom ash geopolymer mortar. J Hazard Mater 2009, 168(1):44-50.
24. ACI Commitee 211.1-91. Standard practice for selecting proportions for normal, heavyweight, and mass concrete. ACI manual of concrete practice, Part 1. Michigan (USA): American Concrete Institute; 2000. p. 38.
25. Chindaprasirt P., Jaturapitakkul C., Sinsiri T. Effect of fly ash fineness on compressive strength and pore size of blended cement paste. Cem Concr Compos 2005, 27(4):425-428.
26. van Jaarsveld J.G.S., van Deventer J.S.J., Lukey G.C. The characterisation of source materials in fly ash-based geopolymers. Mater Lett 2003, 57(7):1272-1280.
27. Teixeira-Pinto A, Pacheco-Torgal F, Jalali S. Geopolymer manufacture and applications - main problems when using concrete technology. In: Geopolymer conference, Melbourne, Australia; 2002.
28. Pacheco-Torgal F, Castro-Gomes JP, Jalali S. Studies about mix composition of alkali-activated mortars using waste mud from Panasqueira. In: Proceedings of the engineering conference, University of Beira Interior, Covilhã, Portugal; 2005.
29. Chusilp N., Jaturapitakkul C., Kiattikomol K. Utilization of bagasse ash as a pozzolanic material in concrete. Constr Build Mater 2009, 23(11):3352-3358.
30. Chindaprasirt P., Homwuttiwong S., Jaturapitakkul C. Strength and water permeability of concrete containing palm oil fuel ash and rice husk-bark ash. Constr Build Mater 2007, 21(7):1492-1499.
31. Zuhua Z., Xiao Y., Huajun Z., Yue C. Role of water in the synthesis of calcined kaolin-based geopolymer. Appl Clay Sci 2009, 43(2):218-223.
32. 2. Cem Concr Res 2007, 37(4):512-518.
33. Kolias S., Georgiou C. The effect of paste volume and of water content on the strength and water absorption of concrete. Cem Concr Com 2005, 27(2):211-216.
34. Yaşar E., Erdoĝan Y., Ki{dotless}li{dotless}ç A. Effect of limestone aggregate type and water-cement ratio on concrete strength. Mater Lett 2004, 58(5):772-777.
35. ACI Commitee 318-08. Building Code Requirements for Structural Concrete (ACI 318-08) and Commentary. An ACI Standard. Michigan (USA): American Concrete Institute; 2008. p. 465.
36. Hearn N. Saturated permeability of concrete as influenced by cracking and self-sealing. PhD thesis. University of Cambridge, Cambridge, UK; 1993.