Finite element analysis of blister formation in laser-induced forward transfer

Journal of Materials Research

Volumn 26, Issue 18, 2011, Pages 2438-2449

  Kattamis, Nicholas T ^a   Brown, Matthew S ^a   Arnold, Craig B ^a  

^a Princeton University   (United States)

Author keywords

Laser ablation; Polymer; Stress strain relationship

Indexed keywords

BIOLOGICAL APPLICATIONS; BLISTER FORMATION; DIRECT-WRITE TECHNIQUE; EXPANSION DYNAMICS; EXPERIMENTAL MEASUREMENTS; FINITE ELEMENT MODELS; HIGH RESOLUTION; LASER INDUCED FORWARD TRANSFER; MATERIAL PARAMETER; MODEL INPUTS; POLYMER LAYERS; STRAIN-RATE-DEPENDENT; STRESS/STRAIN RELATIONSHIP;

ABLATION; INK; MASS TRANSFER; MECHANICAL PROPERTIES; OPTICAL PROPERTIES; POLYMERS; STRAIN RATE;

FINITE ELEMENT METHOD;

EID: 80053995736     PISSN: 08842914     EISSN: 20445326     Source Type: Journal    
DOI: 10.1557/jmr.2011.215     Document Type: Article

References (56)

1. J. Bohandy, B.F. Kim, and F.J. Adrian: Metal deposition from a supported metal film using an excimer laser. J. Appl. Phys. 60, 1538 (1986).
2. A. Piqué, D.B. Chrisey, R.C.Y. Auyeung, J. Fitz-Gerald, H.D. Wu, R.A. McGill, S. Lakeou, P.K. Wu, V. Nguyen, and M. Duignan: A novel laser transfer process for direct writing of electronic and sensor materials. Appl. Phys. A 69, 279 (1999).
3. A. Piqué, C.B. Arnold, H. Kim, M. Ollinger, and T.E. Sutto: Rapid prototyping of micropower sources by laser direct-write. Appl. Phys. A 79, 783 (2004).
4. C.B. Arnold, P. Serra, and A. Piqué: Laser direct-write techniques for printing of complex materials. MRS Bull. 32, 23 (2007).
5. D.A. Willis, and V. Grosu: Microdroplet deposition by laserinduced forward transfer. Appl. Phys. Lett. 86, 244103-1 (2005).
6. V. Schultze and M. Wagner: Blow-off of aluminium films. Appl. Phys., A Solids Surf. 53, 241 (1991).
7. M. Colina, M. Duocastella, J.M. Fernández-Pradas, P. Serra, and J.L. Morenza: Laser-induced forward transfer of liquids: Study of the droplet ejection process. J. Appl. Phys. 99, 084909-1 (2006).
8. M. Colina, P. Serra, J.M. Fernández-Pradas, L. Sevilla, and J.L. Morenza: DNA deposition through laser induced forward transfer. Biosens. Bioelectron. 20, 1638 (2005).
9. J.M. Fitz-Gerald, A. Piqué, D.B. Chrisey, P.D. Rack, M. Zeleznik, R.C.Y. Auyeung, and S. Lakeou: Laser direct writing of phosphor screens for high-definition displays. Appl. Phys. Lett. 76, 1386 (2000).
10. M. Brown, N. Kattamis, and C. Arnold: Time-resolved dynamics of laser-induced micro-jets from thin liquid films. Microfluid. Nanofluid. 11, 199 (2011).
11. N.T. Kattamis, N.D. McDaniel, S. Bernhard, and C.B. Arnold: Laser direct write printing of sensitive and robust light emitting organic molecules. Appl. Phys. Lett. 94, 103306-1 (2009).
12. R. Fardel, M. Nagel, F. Nüesch, T. Lippert, and A. Wokaun: Fabrication of organic light-emitting diode pixels by laser-assisted forward transfer. Appl. Phys. Lett. 91, 061103-1 (2007).
13. J. Xu, J. Liu, D. Cui, M. Gerhold, A.Y. Wang, M. Nagel, and T.K. Lippert: Laser-assisted forward transfer of multi-spectral nanocrystal quantum dot emitters. Nanotechnology 18, 025403-1 (2007).
14. S.H. Ko, H. Pan, S.G. Ryu, N. Misra, C.P. Grigoropoulos, and H.K. Park: Nanomaterial enabled laser transfer for organic light emitting material direct writing. Appl. Phys. Lett. 93, 151110-1 (2008).
15. A.J. Birnbaum, K. Heungsoo, N.A. Charipar, and A. Piqué: Laser printing of multi-layered polymer/metal heterostructures for electronic and MEMS devices. Appl. Phys. A 99, 711 (2010).
16. M.S. Brown, N.T. Kattamis, and C.B. Arnold: Time-resolved study of polyimide absorption layers for blister-actuated laser-induced forward transfer. J. Appl. Phys. 107, 083103-1 (2010).
17. N.T. Kattamis, P.E. Purnick, R. Weiss, and C.B. Arnold: Thick film laser induced forward transfer for deposition of thermally and mechanically sensitive materials. Appl. Phys. Lett. 91, 171120-1 (2007).
18. N.T. Kattamis, N.D. McDaniel, S. Bernhard, and C.B. Arnold: Ambient laser direct-write printing of a patterned organo-metallic electroluminescent device. Org. Electron. 12, 7 (2011).
19. S. Moaveni: Finite Element Analysis: Theory and Application with Ansys, 3rd ed. (Prentice Hall, Upper Saddle River, NJ, 2007).
20. Dupont, Kapton Polyimide Film Product Information, p. 3.
21. A. Mostofi: The incorporation of damping in lumped-parameter modelling techniques: Proceedings of the Institution of Mechanical Engineers, Part K. J. Multi-Body Dynam. 213, 11 (1999).
22. G.B. Warburton: The Dynamic Behaviour of Structures, 2nd ed. (Pergamon Press, Oxford/New York, 1976).
23. E.L. Wilson and J. Penzien: Evaluation of orthogonal damping matrices. Int. J. Numer. Methods Eng. 4, 5 (1972).
24. J.F. Hall: Problems encountered from the use (or misuse) of Rayleigh damping. Earthquake Eng. Struct. Dynam. 35, 525 (2006).
25. J.H. Brannon, J.R. Lankard, A.I. Baise, F. Burns, and J. Kaufman: Excimer laser etching of polyimide. J. Appl. Phys. 58, 2036 (1985).
26. S. Küper, J. Brannon, and K. Brannon: Threshold behavior in polyimide photoablation: Single-shot rate measurements and surface-temperature modeling. Appl. Phys., A Solids Surf. 56, 43 (1993).
27. D.C. Drucker and W. Prager: Soil mechanics and plastic analysis for limit design. Q. Appl. Math. 10, 157 (1952).
28. D. Peirce, C.F. Shih, and A. Needleman: A tangent modulus method for rate dependent solids. Comput. Struct. 18, 875 (1984).
29. R. Krüger, M. König, and T. Schneider: Computation of local energy release rates along straight and curved delamination fronts of unidirectionally laminated DCB and ENF specimens, in Proceedings of the 34th AIAA/ASME/ASCE/AHS/ASC SSDM Conference, 1332 (1993).
30. T.K. Hellen: On the method of virtual crack extensions. Int. J. Numer. Methods Eng. 9, 187 (1975).
31. D.M. Parks: The virtual crack extension method for nonlinear material behavior. Comput. Meth. Appl. Mech. Eng. 12, 353 (1977).
32. F.Z. Li, C.F. Shih, and A. Needleman: A comparison of methods for calculating energy release rates. Eng. Fract. Mech. 21, 405 (1985).
33. B. Moran and C.F. Shih: Crack tip and associated domain integrals from momentum and energy balance. Eng. Fract. Mech. 27, 615 (1987).
34. E.F. Rybicki and M.F. Kanninen: A finite element calculation of stress intensity factors by a modified crack closure integral. Eng. Fract. Mech. 9, 931 (1977).
35. K.N. Shivakumar, P.W. Tan, and J.C. Newman Jr.: A virtual crackclosure technique for calculating stress intensity factors for cracked three dimensional bodies. Int. J. Fract. 36, R43 (1988).
36. R. Krueger: Virtual crack closure technique: History, approach, and applications. Appl. Mech. Rev. 57, 109 (2004).
37. L.P. Buchwalter and R.H. Lacombe: Adhesion of polyimide to fluorine-contaminated SiO2 surface. Effect of aminopropyltriethoxysilane on the adhesion. J. Adhes. Sci. Technol. 5, 449 (1991).
38. L.P. Buchwalter, T.S. Oh, and J. Kim: Adhesion of polyimides to ceramics. Effects of aminopropyltriethoxysilane and temperature and humidity exposure on adhesion. J. Adhes. Sci. Technol. 5, 333 (1991).
39. K.L. Mittal: Adhesion Measurement of Films and Coatings: Relative Adhesion Measurement for Thin Film Microelectronic Structures. Part II, Vol. 2 (VSP, Boston, 2001), p. 26.
40. W.D. Calister: Material Science and Engineering: An Introduction, 7th edition. (Wiley, New York, 2007).
41. R.W. Hertzberg: Deformation and Fracture Mechanisms of Engineering Materials, 4th ed. (John Wiley & Sons, Inc., New York, 1996), p. 225.
42. A.S. Argon: Theory for the low-temperature plastic deformation of glassy polymers. Philos. Mag. 28, 839 (1973).
43. M.C. Boyce, D.M. Parks, and A.S. Argon: Large inelastic deformation of glassy polymers. part I: Rate dependent constitutive model. Mech. Mater. 7, 15 (1988).
44. J.E. Field, S.M. Walley, W.G. Proud, H.T. Goldrein, and C.R. Siviour: Review of experimental techniques for high rate deformation and shock studies. Int. J. Impact Eng. 30, 725 (2004).
45. E.O.W.J. Harding and J.D. Campbell: Tensile testing of materials at high impact rates of strain. J. Mech. Eng. Sci. 2, 88 (1960).
46. B.A. Hopkinson: A method of measuring the pressure produced in the detonation of high explosives or by the impact of bullets. Philos. Trans. R. Soc. London, Ser. A 213, 437 (1914).
47. G.T. Gray: ASM Handbook Mechanical Testing and Evaluation: Shock Wave Testing of Ductile Materials, Vol. 8 (ASM International, Materials Park, OH, 2000), p. 530.
48. P. Perzyna: Advances in AppliedMechanics: Fundamental Problems in Viscoplasticity, Vol. 9 (Academic Press, New York, 1966), p. 243.
49. R. Fabbro, J. Fournier, P. Ballard, D. Devaux, and J. Virmont: Physical study of laser-produced plasma in confined geometry. J. Appl. Phys. 68, 775 (1990).
50. G. Paraskevopoulos, D.L. Singleton, R.S. Irwin, and R.S. Taylor: Time-resolved reflectivity as a probe of the dynamics of laser ablation of organic polymers. J. Appl. Phys. 70, 1938 (1991).
51. M.N. Ediger and G.H. Pettit: Time-resolved reflectivity of ArF laser-irradiated polyimide. J. Appl. Phys. 71, 3510 (1992).
52. D.L. Singleton, G. Paraskevopoulos, and R.S. Taylor: Dynamics of excimer laser ablation of polyimide determined by time-resolved reflectivity. Appl. Phys., B Photophys. Laser Chem. 50, 227 (1990).
53. G.H. Pettit, M.N. Ediger, D.W. Hahn, B.E. Brinson, and R. Sauerbrey: Transmission of polyimide during pulsed ultraviolet laser irradiation. Appl. Phys., A Solids Surf. 58, 573 (1994).
54. H. Schmidt, J. Ihlemann, B. Wolff-Rottke, K. Luther, and J. Troe: Ultraviolet laser ablation of polymers: Spot size, pulse duration, and plume attenuation effects explained. J. Appl. Phys. 83, 5458 (1998).
55. G. Koren: Temporal measurements of photofragment attenuation at 248 nm in the laser ablation of polyimide in air. Appl. Phys. Lett. 50, 1030 (1987).
56. A.F. Bower: Applied Mechanics of Solids (CRC Press, New York, 2010), p. 553.