Mechanical properties of highly textured porous Ni-YSZ and Co-YSZ cermets produced from directionally solidified eutectics

Ceramics International

Volumn 37, Issue 8, 2011, Pages 3123-3131

  Roa, J J ^a,b   Laguna Bercero, M A ^c   Larrea, A ^c   Orera, V M ^c   Segarra, M ^b  

^a UNIVERSITÉ DE POITIERS   (France)

^b UNIVERSITY OF BARCELONA   (Spain)

^c UNIVERSITY OF ZARAGOZA   (Spain)

Author keywords

Ceramic materials; Directionally solidified eutectic; Laser floating zone technique; Nanoindentation; Solid Oxide Fuel Cell

Indexed keywords

DIRECTIONALLY SOLIDIFIED; EXPANSION COEFFICIENTS; LASER FLOATING ZONE; LASER FLOATING ZONE TECHNIQUE; LOW THERMAL EXPANSION; SECONDARY PHASE; SOLID OXIDE; YOUNG'S MODULUS;

ATOMIC FORCE MICROSCOPY; CERAMIC MATERIALS; CERMETS; CHEMICAL ATTACK; COBALT COMPOUNDS; EUTECTICS; FUEL CELLS; NANOINDENTATION; SOLIDIFICATION; THERMAL EXPANSION;

MECHANICAL PROPERTIES;

EID: 80053995270     PISSN: 02728842     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ceramint.2011.05.051     Document Type: Article

References (28)

1. J. Llorca, and V.M. Orera Directionally solidified eutectic ceramic oxides Prog. Mater. Sci. 51 2006 711 809 (Pubitemid 44308135)
2. 3-YAG-YSZ eutectics Adv. Mater. 19 2007 2313 2318 (Pubitemid 47409298)
3. 3) fibers Mater. Res. Soc. Symp. Proc. 365 1993 21 27
4. Y. Waku, N. Nakagawa, T. Wakamoto, H. Ohtsubo, K. Shimizu, and Y. Kohtoku A ductile ceramic eutectic composite with high strength at 1873 K Nature 389 1997 49 52 (Pubitemid 27387685)
5. B.C.H. Steele, and A. Heinzel Materials for fuel-cell technologies Nature 414 2001 345 352 (Pubitemid 33097817)
6. S.C. Singhal, and K. Kendall High Temperature Solid Oxide Fuel Cells: Fundamentals, Design, and Applications 2003 Elsevier
7. M.A. Laguna-Bercero, A. Larrea, R.I. Merino, J.I. Peña, and V.M. Orera J. Am. Ceram. Soc. 88 11 2005 3215 3217
8. M.A. Laguna-Bercero, A. Larrea, R.I. Merino, J.I. Peña, and V.M. Orera J. Eur. Ceram. Soc. 28 2008 2325 2329
9. M.A. Laguna-Bercero, A. Larrea, J.I. Peña, R.I. Merino, and V.M. Orera Structured porous Ni- and Co-YSZ solidified eutectic composites J. Eur. Ceram. Soc. 25 2005 1455 1462
10. G. Garcia, R.I. Merino, V.M. Orera, A. Larrea, J.I. Peña, M.A. Laguna-Bercero, J.A. Pardo, J. Santiso, and A. Figueras YSZ thin films deposited on NiO-CSZ anodes by pulsed injection MOCVD for intermediate temperature SOFC applications Chem. Vap. Depos. 10 2004 249 252
11. A. Seluk, and A. Atkinson Elastic properties of ceramic oxides used in solid oxide fuel cells J. Eur. Ceram. Soc. 17 1997 1523 1532 (Pubitemid 127704486)
12. M. Morales, J.J. Roa, X.G. Capdevila, M. Segarra, and S. Pinol Mechanical properties at nanometer scale of GDC and YSZ used as electrolytes for solid oxide fuel cells Acta Mater. 58 2010 2504 2509
13. K.L. Johnson The correlation of indentation experiments J. Mech. Phys. Sol. 18 1970 115 126
14. J. Alcalá, A.C. Barone, and M. Anglada The influence of plastic hardening on surface deformation modes around Vickers and spherical indents Acta Mater. 48 2000 3451 3464
15. Z. Burghard, A. Zimmermann, J. Rödel, F. Aldinger, and B.R. Lawn. Crack opening profiles of indentation cracks in normal and anomalous glasses Acta Mater. 52 2004 293 297
16. B.R. Lawn, M.V. Swain, and K. Phillips On the mode of chipping fracture in brittle solids J. Mater. Sci. Lett. 10 1975 1236 1239
17. I. Horcas, R. Fernandez, J.M. Gomez-Rodriguez, J. Colchero, J. Gomez-Herrero, and A.M. Baro. WSxM: a software for scanning probe microscopy and a tool for nanotechnology Rev. Sci. Instrum. 78 1 2007 013705, 8 pp
18. 2 system J. Cryst. Growth 69 1984 616 618
19. 2(cubic) directionally solidified eutectics J. Am. Ceram. Soc. 80 11 1997 2773 2780 (Pubitemid 127617709)
20. P. Dahl, I. Kaus, Z. Zhao, M. Johnson, M. Nygren, K. Wiik, T. Grade, and M.-A. Einarsrud Densification and properties of zirconia prepared by three different sintering techniques Ceram. Int. 33 2007 1603 1610 (Pubitemid 47445953)
21. V. Menvie Bekale, G. Sattonnay, C. Legros, A.M. Huntz, S. Poissonnet, and L. Thomé Mechanical properties of cubic zirconia irradiated with swift heavy ions J. Nucl. Mater. 384 2009 70 76
22. L. Donzel, and S.G. Roberts J. Eur. Ceram. Soc. 20 2000 2457 2462
23. H. Jiang, Y. Lu, W. Huang, X. Li, and M. Li. Mater. Charact. 51 2003 1 10
24. S. Tekili Comp. Sci. Technol. 65 2005 967 972
25. J.J. Roa, J.C. Ruiz-Morales, J. Canales-Vázquez, M. Morales, X.G. Capdevila, P. Núñez, and M. Segarra Mechanical characterization at nanometric scale of a new design of SOFCs Fuel Cells 11 2011 124 130
26. S. Giraud, and J. Canel Young's modulus of some SOFCs materials as a function of temperature J. Eur. Ceram. Soc. 28 2008 77 83 (Pubitemid 350017303)
27. M. Radovic, and E. Lara-Curzio Elastic properties of nickel-based anodes for solid oxide fuel cells as a function of the fraction of reduced NiO J. Am. Ceram. Soc. 87 2004 2242 2246 (Pubitemid 40108629)
28. J.J. Roa, A. Magraso, M. Morales, P. Núñez, and M. Segarra Determination of hardness, Young's modulus and fracture toughness of lanthanum tungstates as novel proton conductors Ceram. Int. 37 2011 1593 1599