A review of control and modulation methods for matrix converters

IEEE Transactions on Industrial Electronics

Volumn 59, Issue 1, 2012, Pages 58-70

  Rodriguez, Jose ^a   Rivera, Marco ^a   Kolar, Johan W ^b   Wheeler, Patrick W ^c  

^a DEPARTAMENTO DE FÍSICA   (Chile)

^b ETH ZURICH   (Switzerland)

^c UNIVERSITY OF NOTTINGHAM   (United Kingdom)

Author keywords

AC AC conversion; control strategies; matrix converter (MC); modulation schemes

Indexed keywords

AC-AC CONVERSION; CONTROL STRATEGIES; INPUT AND OUTPUTS; INPUT FILTER; MATRIX CONVERTER; MODULATION METHODS; MODULATION SCHEMES; MODULATION STRATEGY; SIGNIFICANT IMPACTS; SINUSOIDAL CURRENTS; THEORETICAL COMPLEXITY;

POWER CONVERTERS;

MODULATION;

EID: 80053653619     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2011.2165310     Document Type: Article

References (100)

1. E. Yamamoto, T. Kume, H. Hara, T. Uchino, J. Kang, and H. Krug, "Development of matrix converter and its applications in industry," in Proc. 35th IEEE IECON, Porto, Portugal, 2009, pp. 4-12.
2. M. Venturini, "A new sine wave in sine wave out, conversion technique which eliminates reactive elements," in Proc. Powercon 7, 1980, pp. E3/1-E3/15.
3. J. Rodriguez, E. Silva, F. Blaabjerg, P. Wheeler, J. Clare, and J. Pontt, "Matrix converter controlled with the direct transfer function approach: Analysis, modelling and simulation," Int. J. Electron., vol. 92, no. 2, pp. 63-85, Feb. 2005.
4. L. Zhang, C. Watthanasarn, and W. Shepherd, "Control of AC-AC matrix converters for unbalanced and/or distorted supply voltage," in Proc. 32nd Annu. IEEE Power Electron. Spec. Conf., 2001, vol. 2, pp. 1108-1113.
5. G. Roy and G.-E. April, "Cycloconverter operation under a new scalar control algorithm," in Proc. 20th Annu. IEEE Power Electron. Spec. Conf., Jun. 1989, vol. 1, pp. 368-375.
6. J. Rodriguez, "High performance dc motor drive using a PWM rectifier with power transistors," Proc. Inst. Elect. Eng. B-Elect. Power Appl., vol. 134, no. 1, p. 9, Jan. 1987.
7. L. Huber and D. Borojevic, "Space vector modulated three-phase to three-phase matrix converter with input power factor correction," IEEE Trans. Ind. Appl., vol. 31, no. 6, pp. 1234-1246, Nov. 1995.
8. F. Blaabjerg, D. Casadei, C. Klumpner, and M. Matteini, "Comparison of two current modulation strategies for matrix converters under unbalanced input voltage conditions," IEEE Trans. Ind. Electron., vol. 49, no. 2, pp. 289-296, Apr. 2002.
9. I. Takahashi and T. Noguchi, "A new quick response and high efficiency control strategy for an induction motor," IEEE Trans. Ind. Electron., vol. IE-22, no. 5, pp. 820-827, Sep. 1986.
10. S. Muller, U. Ammann, and S. Rees, "New time-discrete modulation scheme for matrix converters," IEEE Trans. Ind. Electron., vol. 52, no. 6, pp. 1607-1615, Dec. 2005.
11. M. Rivera, R. Vargas, J. Espinoza, and J. Rodriguez, "Behavior of the predictive DTC based matrix converter under unbalanced AC-supply," in Proc. IEEE Power Electron. Spec. Conf., Sep. 2007, pp. 202-207.
12. P. Wheeler, J. Rodriguez, J. Clare, L. Empringham, and A. Weinstein, "Matrix converters: A technology review," IEEE Trans. Ind. Electron., vol. 49, no. 2, pp. 276-288, Apr. 2002.
13. S. Ferreira Pinto and J. Fernando Silva, "Input filter design for sliding mode controlled matrix converters," in Proc. 32nd Annu. IEEE Power Electron. Spec. Conf., 2001, vol. 2, pp. 648-653.
14. M. Hamouda, F. Fnaiech, and K. Al-Haddad, "Input filter design for SVM dual-bridge matrix converters," in Proc. IEEE Int. Symp. Ind. Electron., Jul. 2006, vol. 2, pp. 797-802.
15. H. She, H. Lin, X. Wang, and L. Yue, "Damped input filter design of matrix converter," in Proc. Int. Conf. PEDS, Nov. 2009, pp. 672-677.
16. S. Bernet, S. Ponnaluri, and R. Teichmann, "Design and loss comparison of matrix converters, and voltage-source converters for modern AC drives," IEEE Trans. Ind. Electron., vol. 49, no. 2, pp. 304-314, Apr. 2002.
17. J. Rzasa, "Capacitor clamped multilevel matrix converter controlled with Venturini method," in Proc. 13th EPE PEMC, Sep. 2008, pp. 357-364.
18. Y. Mei and L. Huang, "Improved switching function modulation strategy for three-phase to single-phase matrix converter," in Proc. IEEE IPEMC, May 2009, pp. 1734-1737.
19. S. Lopez Arevalo, P. Zanchetta, P. Wheeler, A. Trentin, and L. Empringham, "Control and implementation of a matrix-converterbased AC-ground power-supply unit for aircraft servicing," IEEE Trans. Ind. Electron., vol. 57, no. 6, pp. 2076-2084, Jun. 2010.
20. J. Itoh, I. Sato, A. Odaka, H. Ohguchi, H. Kodatchi, and N. Eguchi, "A novel approach to practical matrix converter motor drive system with reverse blocking IGBT," in Proc. 35th Annu. IEEE Power Electron. Spec. Conf., Jun. 2004, vol. 3, pp. 2380-2385.
21. K. Mohapatra, P. Jose, A. Drolia, G. Aggarwal, and S. Thuta, "A novel carrier-based PWM scheme for matrix converters that is easy to implement," in Proc. 36th IEEE Power Electron. Spec. Conf., Jun. 2005, pp. 2410-2414.
22. Z. Idris, M. Hamzah, and A. Omar, "Implementation of single-phase matrix converter as a direct AC-AC converter synthesized using sinusoidal pulse width modulation with passive load condition," in Proc. Int. Conf. PEDS, Nov. 2005, vol. 2, pp. 1536-1541.
23. Y.-D. Yoon and S.-K. Sul, "Carrier-based modulation technique for matrix converter," IEEE Trans. Power Electron., vol. 21, no. 6, pp. 1691-1703, Nov. 2006.
24. T. Satish, K. Mohapatra, and N. Mohan, "Steady state over-modulation of matrix converter using simplified carrier based control," in Proc. 33rd IEEE IECON, Nov. 2007, pp. 1817-1822.
25. P. Loh, R. Rong, F. Blaabjerg, L. Shan, and P. Wang, "Carrier-based modulation schemes for various three-level matrix converters," in Proc. IEEE Power Electron. Spec. Conf., Jun. 2008, pp. 1720-1726.
26. S. Thuta, K. Mohapatra, and N. Mohan, "Matrix converter over-modulation using carrier-based control: Maximizing the voltage transfer ratio," in Proc. IEEE Power Electron. Spec. Conf., Jun. 2008, pp. 1727-1733.
27. Y. Miura, S. Horie, S. Kokubo, T. Amano, T. Ise, T. Momose, and Y. Sato, "Application of three-phase to single-phase matrix converter to gas engine cogeneration system," in Proc. IEEE ECCE, Sep. 2009, pp. 3290-3297.
28. P. C. Loh, R. Rong, F. Blaabjerg, and P. Wang, "Digital carrier modulation and sampling issues of matrix converters," IEEE Trans. Power Electron., vol. 24, no. 7, pp. 1690-1700, Jul. 2009.
29. T. Sanada, S. Ogasawara, and M. Takemoto, "Experimental evaluation of a new PWM control scheme for matrix converters," in Proc. IPEC, Jun. 2010, pp. 2366-2371.
30. P. Kiatsookkanatorn and S. Sangwongwanich, "A unified PWM strategy for matrix converters and its dipolar PWM realization," in Proc. IPEC, Jun. 2010, pp. 3072-3079.
31. T. Yamashita and T. Takeshita, "PWM strategy of single-phase to threephase matrix converters for reducing a number of commutations," in Proc. IPEC, Jun. 2010, pp. 3057-3064.
32. J. Itoh and K. Maki, "Single-pulse operation for a matrix converter synchronized with the output frequency," in Proc. IPEC, Jun. 2010, pp. 2781-2788.
33. S. Ishii, H. Hara, T. Higuchi, T. Kawachi, K. Yamanaka, N. Koga, T. Kume, and J. Kang, "Bidirectional DC-AC conversion topology using matrix converter technique," in Proc. IPEC, Jun. 2010, pp. 2768-2773.
34. P. Potamianos, E. Mitronikas, and A. Safacas, "A modified carrier-based modulation method for three-phase matrix converters," in Proc. 13th EPE, Sep. 2009, pp. 1-9.
35. Y.-D. Yoon and S.-K. Sul, "Carrier-based modulation method for matrix converter with input power factor control and under unbalanced input voltage conditions," in Proc. 22nd Annu. IEEE APEC, Mar. 2007, pp. 310-314.
36. O. Simon, J. Mahlein, M. Muenzer, and M. Bruckmarm, "Modern solutions for industrial matrix-converter applications," IEEE Trans. Ind. Electron., vol. 49, no. 2, pp. 401-406, Apr. 2002.
37. D. Casadei, G. Serra, A. Tani, and L. Zarri, "Matrix converter modulation strategies: A new general approach based on space-vector representation of the switch state," IEEE Trans. Ind. Electron., vol. 49, no. 2, pp. 370-381, Apr. 2002.
38. L. Helle, K. Larsen, A. Jorgensen, S. Munk-Nielsen, and F. Blaabjerg, "Evaluation ofmodulation schemes for three-phase to three-phase matrix converters," IEEE Trans. Ind. Electron., vol. 51, no. 1, pp. 158-171, Feb. 2004.
39. D. Casadei, G. Serra, A. Tani, and L. Zarri, "A novel modulation strategy for matrix converters with reduced switching frequency based on output current sensing," in Proc. 35th Annu. IEEE Power Electron. Spec. Conf., Jun. 2004, vol. 3, pp. 2373-2379.
40. S. Pinto and J. Silva, "Direct control method for matrix converters with input power factor regulation," in Proc. 35th Annu. IEEE Power Electron. Spec. Conf., Jun. 2004, vol. 3, pp. 2366-2372.
41. M. Jussila, M. Salo, and H. Tuusa, "Induction motor drive fed by a vector modulated indirect matrix converter," in Proc. 35th Annu. IEEE Power Electron. Spec. Conf., 2004, vol. 4, pp. 2862-2868.
42. L. Wang, D. Zhou, K. Sun, and L. Huang, "A novel method to enhance the voltage transfer ratio of matrix converter," in Proc. IEEE TENCON, Nov. 2004, vol. 4, pp. 81-84.
43. K.-B. Lee and F. Blaabjerg, "Reduced-order extended Luenberger observer based sensorless vector control driven by matrix converter with nonlinearity compensation," IEEE Trans. Ind. Electron., vol. 53, no. 1, pp. 66-75, Feb. 2006.
44. M. Jussila and H. Tuusa, "Space-vector modulated indirect matrix converter under distorted supply voltage-Effect on load current," in Proc. IEEE 36th Power Electron. Spec. Conf., Jun. 2005, pp. 2396-2402.
45. F. Gao and M. Iravani, "Dynamic model of a space vector modulated matrix converter," IEEE Trans. Power Del., vol. 22, no. 3, pp. 1696-1705, Jul. 2007.
46. M. Jussila and H. Tuusa, "Comparison of simple control strategies of space-vector modulated indirect matrix converter under distorted supply voltage," IEEE Trans. Power Electron., vol. 22, no. 1, pp. 139-148, Jan. 2007.
47. S. Kwak, T. Kim, and O. Vodyakho, "Space vector control methods for two-leg and three-leg based AC to AC converters for two-phase drive systems," in Proc. 34th IEEE IECON, Nov. 2008, pp. 959-964.
48. H.-H. Lee, H. Nguyen, and T.-W. Chun, "New direct-SVM method for matrix converter with main input power factor compensation," in Proc. 34th IEEE IECON, Nov. 2008, pp. 1281-1286.
49. D. Casadei, G. Serra, A. Tani, and L. Zarri, "Optimal use of zero vectors for minimizing the output current distortion in matrix converters," IEEE Trans. Ind. Electron., vol. 56, no. 2, pp. 326-336, Feb. 2009.
50. H. She, H. Lin, X.Wang, and S. Xiong, "Space vector modulated matrix converter under abnormal input voltage conditions," in Proc. 6th IEEE IPEMC, May 2009, pp. 1723-1727.
51. F. Bradaschia, E. Ibarra, J. Andreu, I. Kortabarria, E. Ormaetxea, and M. Cavalcanti, "Matrix converter: Improvement of the space vector modulation via a new double-sided generalized scalar PWM," in Proc. 35th IEEE IECON, Nov. 2009, pp. 4511-4516.
52. H. Nguyen, H.-H. Lee, and T.-W. Chun, "An investigation on direct space vector modulation methods for matrix converter," in Proc. 35th IEEE IECON, Nov. 2009, pp. 4493-4498.
53. E. Ibarra, J. Andreu, I. Kortabarria, E. Ormaetxea, and E. Robles, "A fault tolerant space vector modulation strategy for matrix converters," in Proc. 35th IEEE IECON, Nov. 2009, pp. 4463-4468.
54. R. Cardenas-Dobson, R. Pena, P. Wheeler, and J. Clare, "Experimental validation of a space vector modulation algorithm for four-leg matrix converters," IEEE Trans. Ind. Electron., vol. 58, no. 4, pp. 1282-1293, Apr. 2011.
55. M. Nguyen, H. Lee, and T. Chun, "Input power factor compensation algorithms using a new direct-SVM method for matrix converter," IEEE Trans. Ind. Electron., vol. 58, no. 1, pp. 232-243, Jan. 2011.
56. M. Y. Lee, P. Wheeler, and C. Klumpner, "Space-vector modulated multilevel matrix converter," IEEE Trans. Ind. Electron., vol. 57, no. 10, pp. 3385-3394, Oct. 2010.
57. E. Ormaetxea, J. Andreu, I. Kortabarria, U. Bidarte, I. Martinez de Alegria, E. Ibarra, and E. Olaguenaga, "Matrix converter protection and computational capabilities based on a system on chip design with an FPGA," IEEE Trans. Power Electron., vol. 26, no. 1, pp. 272-287, Jan. 2011.
58. M. Kazmierkowski, R. Krishnan, and F. Blaabjerg, Control in Power Electronics. New York: Academic, 2002.
59. D. Casadei, G. Serra, and A. Tani, "The use of matrix converters in direct torque control of induction machines," IEEE Trans. Ind. Electron., vol. 48, no. 6, pp. 1057-1064, Dec. 2001.
60. C. Ortega, A. Arias, C. Caruana, J. Balcells, and G. Asher, "Improved waveform quality in the direct torque control of matrix-converter-fed PMSM drives," IEEE Trans. Ind. Electron., vol. 57, no. 6, pp. 2101-2110, Jun. 2010.
61. D. Xiao and F. Rahman, "A modified DTC for matrix converter drives using two switching configurations," in Proc. 13th EPE, Sep. 2009, pp. 1-10.
62. K.-B. Lee and F. Blaabjerg, "Sensorless DTC-SVM for induction motor driven by a matrix converter using a parameter estimation strategy," IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 512-521, Feb. 2008.
63. J.-X. Wang and J. guo Jiang, "Variable-structure direct torque control for induction motor driven by a matrix converter with overmodulation strategy," in Proc. 6th IEEE IPEMC, May 2009, pp. 580-584.
64. D. Xiao and F. Rahman, "An improved DTC for matrix converter drives using multi-mode ISVM and unity input power factor correction," in Proc. 13th EPE, Sep. 2009, pp. 1-10.
65. S. Kouro, P. Cortes, R. Vargas, U. Ammann, and J. Rodriguez, "Model predictive control, a simple and powerful method to control power converters," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 1826-1838, Jun. 2009.
66. M. Rivera, R. Vargas, J. Espinoza, J. Rodriguez, P. Wheeler, and C. Silva, "Current control in matrix converters connected to polluted AC voltage supplies," in Proc. IEEE Power Electron. Spec. Conf., Jun. 2008, pp. 412-417.
67. R. Vargas, J. Rodriguez, U. Ammann, and P.Wheeler, "Predictive current control of an induction machine fed by a matrix converter with reactive power control," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4362-4371, Dec. 2008.
68. R. Vargas, U. Ammann, J. Rodriguez, and J. Pontt, "Predictive strategy to control common-mode voltage in loads fed by matrix converters," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4372-4380, Dec. 2008.
69. R. Vargas, U. Ammann, and J. Rodriguez, "Predictive approach to increase efficiency and reduce switching losses on matrix converters," IEEE Trans. Power Electron., vol. 24, no. 4, pp. 894-902, Apr. 2009.
70. F. Morel, J.-M. Retif, X. Lin-Shi, B. Allard, and P. Bevilacqua, "A predictive control for a matrix converter-fed permanent magnet synchronous machine," in Proc. IEEE Power Electron. Spec. Conf., Jun. 2008, pp. 15-21.
71. P. Gamboa, J. Silva, S. Pinto, and E.Margato, "Predictive optimal matrix converter control for a dynamic voltage restorer with flywheel energy storage," in Proc. 35th IEEE IECON, Nov. 2009, pp. 759-764.
72. F. Barrero, M. Arahal, R. Gregor, S. Toral, and M. Duran, "One-step modulation predictive current control method for the asymmetrical dual three-phase induction machine," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 1974-1983, Jun. 2009.
73. P. Correa, J. Rodriguez, M. Rivera, J. Espinoza, and J. Kolar, "Predictive control of an indirect matrix converter," in IEEE Trans. Ind. Electron., Jun. 2009, vol. 56, no. 6, pp. 1847-1853.
74. M. Rivera, P. Correa, J. Rodriguez, I. Lizama, and J. Espinoza, "Predictive control of the indirect matrix converter with active damping," in Proc. 6th IEEE IPEMC, May 2009, pp. 1738-1744.
75. Y. Li, N.-S. Choi, H. Cha, and F. Peng, "Carrier-based predictive current controlled pulse width modulation for matrix converters," in Proc. 6th IEEE IPEMC, May 2009, pp. 1009-1014.
76. J. Rodriguez, J. Kolar, J. Espinoza, M. Rivera, and C. Rojas, "Predictive current control with reactive power minimization in an indirect matrix converter," in Proc. IEEE ICIT, Mar. 2010, pp. 1839-1844.
77. R. Vargas, J. Rodriguez, C. Rojas, and P. Wheeler, "Predictive current control applied to a matrix converter: An assessment with the direct transfer function approach," in Proc. IEEE ICIT, Mar. 2010, pp. 1832-1838.
78. J. Rodriguez, J. Espinoza, M. Rivera, F. Villarroel, and C. Rojas, "Predictive control of source and load currents in a direct matrix converter," in Proc. IEEE ICIT, Mar. 2010, pp. 1826-1831.
79. J. Rodriguez, J. Pontt, R. Vargas, P. Lezana, U. Ammann, P. Wheeler, and F. Garcia, "Predictive direct torque control of an induction motor fed by a matrix converter," in Proc. Eur. Conf. Power Electron. Appl., Sep. 2007, pp. 1-10.
80. R. Vargas, M. Rivera, J. Rodriguez, J. Espinoza, and P. Wheeler, "Predictive torque control with input pf correction applied to an induction machine fed by a matrix converter," in Proc. IEEE Power Electron. Spec. Conf., Jun. 2008, pp. 9-14.
81. C. Ortega, A. Arias, and J. Espina, "Predictive vector selector for direct torque control of matrix converter fed induction motors," in Proc. 35th IEEE IECON, Nov. 2009, pp. 1240-1245.
82. T. Geyer, G. Papafotiou, and M. Morari, "Model predictive direct torque control-Part I: Concept, algorithm, and analysis," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 1894-1905, Jun. 2009.
83. G. Papafotiou, J. Kley, K. Papadopoulos, P. Bohren, and M. Morari, "Model predictive direct torque control-Part II: Implementation and experimental evaluation," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 1906-1915, Jun. 2009.
84. R. Vargas, U. Ammann, B. Hudoffsky, J. Rodriguez, and P. Wheeler, "Predictive torque control of an induction machine fed by a matrix converter with reactive input power control," IEEE Trans. Power Electron., vol. 25, no. 6, pp. 1426-1438, Jun. 2010.
85. J. Rodriguez, J. Kolar, J. Espinoza, M. Rivera, and C. Rojas, "Predictive torque and flux control of an induction machine fed by an indirect matrix converter," in Proc. IEEE ICIT, Mar. 2010, pp. 1857-1863.
86. J. Itoh, K. Koiwa, and K. Kato, "Input current stabilization control of a matrix converter with boost-up functionality," in Proc. IPEC, Jun. 2010, pp. 2708-2714.
87. H. Karaca, R. Akkaya, and H. Dogan, "A novel compensation method based on fuzzy logic control for matrix converter under distorted input voltage conditions," in Proc. 18th Int. Conf. Elect. Mach., Sep. 2008, pp. 1-5.
88. K. Park, E.-S. Lee, and K.-B. Lee, "A Z-source sparse matrix converter with a fuzzy logic controller based compensation method under abnormal input voltage conditions," in Proc. IEEE ISIE, Jul. 2010, pp. 614-619.
89. P. Q. Dzung and L.M. Phuong, "A new artificial neural network-Direct torque control for matrix converter fed three-phase induction motor," in Proc. Int. Conf. PEDS, 2005, vol. 1, pp. 78-83.
90. H. H. Lee, P. Q. Dzung, L. M. Phuong, and L. D. Khoa, "A new artificial neural network controller for direct control method for matrix converters," in Proc. Int. Conf. PEDS, Nov. 2009, pp. 434-439.
91. P. Zanchetta, M. Sumner, J. Clare, and P. Wheeler, "Control of matrix converters for AC power supplies using genetic algorithms," in Proc. IEEE Ind. Electron., May 2004, vol. 2, pp. 1429-1433.
92. P. Zanchetta, J. Clare, P. Wheeler, M. Bland, L. Empringham, and D. Katsis, "Control design of a three-phase matrix converter mobile ac power supply using genetic algorithms," in Proc. 36th IEEE Power Electron. Spec. Conf., Jun. 2005, pp. 2370-2375.
93. J. Kolar, T. Friedli, F. Krismer, and S. Round, "The essence of threephase AC/AC converter systems," in Proc. 13th EPE-PEMC, Sep. 2008, pp. 27-42.
94. X. Liu, P. C. Loh, F. Z. Peng, and P. Wang, "Optimal modulation of indirect Z-source matrix converter," in Proc. IPEC, Jun. 2010, pp. 3049-3056.
95. D. Zhou, K. Phillips, G. Skibinski, J. McCarty, M. Loth, B. Buchholz, D. Braun, and R. Lukaszweski, "Evaluation of AC-AC matrix converter, a manufacturer's perspective," in Conf. Rec. 37th IEEE IAS Annu. Meeting, 2002, pp. 1558-1563.
96. C. Klumpner, P. Nielsen, I. Boldea, and F. Blaabjerg, "A new matrix converter motor (MCM) for industry applications," IEEE Trans. Ind. Electron., vol. 49, no. 2, pp. 325-335, Apr. 2002.
97. K. Yamada, T. Higuchi, E. Yamamoto, H. Hara, T. Sawa, M. Swamy, and T. Kume, "Filtering techniques for matrix converters to achieve environmentally harmonious drives," in Proc. Eur. Conf. Power Electron. Appl., 2005, p. 10.
98. P. Wheeler, J. Clare, M. Apap, L. Empringham, K. Bradley, S. Pickering, and D. Lampard, "A fully integrated 30 kW motor drive using matrix converter technology," in Proc. Eur. Conf. Power Electron. Appl., 2005, p. 9.
99. T. Hatase, T. Abe, T. Higuchi, and H. Hara, "Improvement of output voltage waveform for ARCP matrix converter," in Proc. 13th EPE, Sep. 2009, pp. 1-8.
100. R. Bucknall and K. Ciaramella, "On the conceptual design and performance of a matrix converter for marine electric propulsion," IEEE Trans. Power Electron., vol. 25, no. 6, pp. 1497-1508, Jun. 2010.