Parameter identification of induction machine with a starting no-load low-voltage test

IEEE Transactions on Industrial Electronics

Volumn 59, Issue 1, 2012, Pages 352-360

  Lin, Whei Min ^a   Su, Tzu Jung ^a   Wu, Rong Ching ^b  

^a NATIONAL SUN YAT SEN UNIVERSITY   (Taiwan)

^b I SHOU UNIVERSITY   (Taiwan)

Author keywords

Induction machine; least mean square (LMS) method; parameter estimation; particle swarm optimization (PSO)

Indexed keywords

INDUCTION MACHINES; INITIAL VALUES; LEAST MEAN SQUARE METHOD; LOW-VOLTAGE; MECHANICAL PARAMETERS; PARTICLE SWARM OPTIMIZATION METHOD; SAMPLED DATA; SLIP RATES; STEADY-STATE MODELS; TIME VARYING;

IDENTIFICATION (CONTROL SYSTEMS); INDUCTION MOTORS; LEAST SQUARES APPROXIMATIONS; PARAMETER ESTIMATION; TIME VARYING SYSTEMS;

PARTICLE SWARM OPTIMIZATION (PSO);

EID: 80053642574     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2011.2148674     Document Type: Article

References (31)

1. IEEE Standard Test Procedure for Polyphase Induction Motors and Generators, IEEE Std. 112-2004, Nov. 2004.
2. H. A. Toliyat, E. Levi, and M. Raina, "A review of RFO induction motor parameter estimation techniques," IEEE Trans. Energy Convers., vol. 18, no. 2, pp. 271-283, Jun. 2003.
3. J. Holtz, "Sensorless control of induction machines-With or without signal injection?" IEEE Trans. Ind. Electron., vol. 53, no. 1, pp. 7-30, Feb. 2006.
4. Y.Wu and H. Gao, "Induction-motor stator and rotor winding temperature estimation using signal injection method," IEEE Trans. Ind. Appl., vol. 42, no. 4, pp. 1038-1044, Jul./Aug. 2006.
5. Y. S. Kwon, J. H. Lee, S. H. Moon, B. K. Kwon, C. H. Choi, and J. K. Seok, "Standstill parameter identification of vector-controlled induction motors using the frequency characteristics of rotor bars," IEEE Trans. Ind. Appl., vol. 45, no. 5, pp. 1610-1618, Sep./Oct. 2009.
6. P. Zhang, Y. Du, J. Dai, T. G. Habetler, and B. Lu, "Impaired- coolingcondition detection using dc-signal injection for soft-starter-connected induction motors," IEEE Trans. Ind. Electron., vol. 56, no. 11, pp. 4642-4650, Nov. 2009.
7. D. Telford, M. W. Dunnigam, and B. W. Williams, "Online identification of induction machine electrical parameters for vector control loop tuning," IEEE Trans. Ind. Electron., vol. 50, no. 2, pp. 253-261, Apr. 2003.
8. D. P. Mar?ceti?c and S. N. Vukosavić, "Speed-sensorless ac drives with the rotor time constant parameter update," IEEE Trans. Ind. Electron., vol. 54, no. 5, pp. 2618-2625, Oct. 2007.
9. S. Maiti, C. Chakraborty, Y. Hori, and M. C. Ta, "Model reference adaptive controller-based rotor resistance and speed estimation techniques for vector controlled induction motor drive utilizing reactive power," IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 594-601, Feb. 2008.
10. B. Abdelhadi, A. Benoudjit, and N. Nait-Said, "Application of genetic algorithm with a novel adaptive scheme for the identification of induction machine parameters," IEEE Trans. Energy Convers., vol. 20, no. 2, pp. 284-291, Jun. 2005.
11. B. Karanayil, M. F. Rahman, and C. Grantham, "Online stator and rotor resistance estimation scheme using artificial neural networks for vector controlled speed sensorless induction motor drive," IEEE Trans. Ind. Electron., vol. 54, no. 1, pp. 167-176, Feb. 2007.
12. T. Orlowska-Kowalska and K. Szabat, "Neural-networks application for mechanical variables estimation of two-mass drive system," IEEE Trans. Ind. Electron., vol. 54, no. 3, pp. 1352-1364, Jun. 2007.
13. M. Wlas, Z. Krzemi'nski, and H. A. Toliyat, "Neural-network-based parameter estimations of induction motors," IEEE Trans. Ind. Electron., vol. 55, no. 4, pp. 1783-1794, Apr. 2008.
14. A. Trentin, P. Zanchetta, C. Gerada, J. Clare, and P. W. Wheeler, "Optimized commissioning method for enhanced vector control of highpower induction motor drives," IEEE Trans. Ind. Electron., vol. 56, no. 5, pp. 1708-1717, May 2009.
15. F. Ding and J. Ding, "Least-squares parameter estimation for system with irregularly missing data," Int. J. Adaptive Control Signal Process., vol. 24, no. 7, pp. 540-553, Jul. 2010.
16. M. Cirrincione, M. Pucci, G. Girrincione, and G.-A. Capolino, "Constrained minimization for parameter estimation of induction motors in saturated and unsaturated conditions," IEEE Trans. Ind. Electron., vol. 52, no. 5, pp. 1391-1402, Oct. 2005.
17. R. Babau, I. Boldea, T. J. E. Miller, and N. Muntean, "Complete parameter identification of large induction machines from no-load accelerationdeceleration tests," IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 1962-1972, Aug. 2007.
18. E. Laroche and M. Boutayeb, "Identification of the induction motor in sinusoidal model," IEEE Trans. Energy Convers., vol. 25, no. 1, pp. 11-19, May. 2010.
19. F. Ding, L. Qiu, and T. Chen, "Reconstruction of continuous-time systems from their non-uniformly sampled discrete-time systems," Automatica, vol. 45, no. 2, pp. 324-332, Feb. 2009.
20. F. Ding, G. Liu, and P. X. Liu, "Partially coupled stochastic gradient identification methods for non-uniformly sampled systems," IEEE Trans. Autom. Control, vol. 55, no. 8, pp. 1976-1981, Aug. 2010.
21. F. Ding and T. Chen, "Performance analysis of multi-innovation gradient type identification methods," Automatica, vol. 43, no. 1, pp. 1-14, Jan. 2007.
22. F. Ding, P. X. Liu, and G. Liu, "Auxiliary model based multi-innovation extended stochastic gradient parameter estimation with colored measurement noise," Signal Process., vol. 89, no. 10, pp. 1883-1890, Oct. 2009.
23. F. Ding, "Several multi-innovation identification methods," Digit. Signal Process., vol. 20, no. 4, pp. 1027-1039, Jul. 2010.
24. L. A. Ribeiro and C. B. Jacobina, "Real-time estimation of the electrical parameters of an induction machine using sinusoidal PWM voltage waveforms," IEEE Trans. Ind. Appl., vol. 36, no. 3, pp. 743-754, May/Jun. 2000.
25. F. Ding, P. X. Liu, and G. Liu, "Gradient based and least-squares based iterative identification methods for OE and OEMA system," Digit. Signal Process., vol. 20, no. 3, pp. 664-677, May 2010.
26. K. E. Parsopoulos and M. N. Vrahatis, "On the computation of all global minimizers through particle swarm optimization," IEEE Trans. Evol. Comput., vol. 8, no. 3, pp. 211-224, Jun. 2004.
27. F.-J. Lin, L.-T. Teng, J.-W. Lin, and S.-Y. Chen, "Recurrent functionallink- based fuzzy-network-controlled induction-generator system using improved particle swarm optimization," IEEE Trans. Ind. Electron., vol. 56, no. 5, pp. 1557-1577, May 2009.
28. R. Krishnan, Electric Motor Drives: Modeling Analysis and Control. Englewood Cliffs, NJ: Prentice-Hall, 2001.
29. J. J. Cathey, R. K. Calvin, III, and A. K. Ayoub, "Transient load model of an induction machine," IEEE Trans. Power App. Syst., vol. PAS-92, no. 4, pp. 1399-1406, Jul./Aug. 1973.
30. P. Zhang, J. R. Marti, and H. W. Dommel, "Induction machine modeling based on shifted frequency analysis," IEEE Trans. Power Syst., vol. 24, no. 1, pp. 157-164, Feb. 2009.
31. A. G. Phadke and B. Kasztenny, "Synchronized phasor and frequency measurement under transient conditions," IEEE Trans. Power Del., vol. 24, no. 1, pp. 89-95, Jan. 2009.