Impaired-cooling-condition detection using DC-signal injection for soft-starter-connected induction motors

IEEE Transactions on Industrial Electronics

Volumn 56, Issue 11, 2009, Pages 4642-4650

  Zhang, Pinjia ^a   Du, Yi ^a   Dai, Jing ^a   Habetler, Thomas G ^a   Lu, Bin ^b  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

^b EATON CORPORATION   (United States)

Author keywords

AC motor protection; Cooling; Fault diagnosis; Induction motor; Resistance measurement; Temperature measurement; Thermal variables measurement; Thyristors

Indexed keywords

CONDITION DETECTION; COOLING CAPABILITY; COOLING CONDITIONS; CURRENT SENSORS; FAULT DIAGNOSIS; INSPECTION AND MAINTENANCE; LOAD CONDITION; PARAMETER IDENTIFICATION; RESISTANCE MEASUREMENT; SIGNAL INJECTION; SOFT-STARTER; TEMPERATURE MONITORING; THERMAL MODEL; THERMAL PARAMETERS; THERMAL PROTECTION;

AC MOTORS; CELLULAR RADIO SYSTEMS; CONDITION MONITORING; CONTROL THEORY; COOLING; DC MOTORS; ELECTRIC RESISTANCE MEASUREMENT; ELECTRIC SWITCHGEAR; FAILURE ANALYSIS; MOTORS; QUENCHING; SIGNAL DETECTION; STARTERS; STATORS; TEMPERATURE MEASUREMENT; THYRISTORS; WINDING;

INDUCTION MOTORS;

EID: 70350376408     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2009.2021588     Document Type: Article

References (34)

1. "Report of large motor reliability survey of industrial and commercial installations, Part I," IEEE Trans. Ind. Appl., vol. IA-21, no. 4, pp. 853-864, Jul. 1985.
2. A. H. Bonnett and G. C. Soukup, "Cause and analysis of stator and rotor failures in three-phase squirrel-cage induction motors," IEEE Trans. Ind. Appl., vol. 28, no. 4, pp. 921-937, Jul./Aug. 1992.
3. M. F. Cabanas, J. L. Ruiz Gonzalez, J. L. B. Sampayo, M. G. Melero, C. H. Rojas, F. Pedrayes, A. Arguelles, and J. Vina, "Analysis of the fatigue causes on the rotor bars of squirrel cage asynchronous motors: Experimental analysis and modelling of medium voltage motors," in 4th IEEE Int. SDEMPED, 2003, pp. 247-252.
4. S. Grubic, J. M. Aller, B. Lu, and T. G. Habetler, "A survey on testing and monitoring methods for stator insulation systems of low-voltage induction machines focusing on turn insulation problems," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4127-4136, Dec. 2008.
5. M. S. Abou-El-Ela, A. I. Megahed, and O. P. Malik, "Thermal model based digital relaying algorithm for induction motor protection," in Proc. Can. Conf. Elect. Comput. Eng., 1996, vol. 2, pp. 1016-1019.
6. S. E. Zocholl, "Motor analysis and thermal protection," IEEE Trans. Power Del., vol. 5, no. 3, pp. 1275-1280, Jul. 1990.
7. K. D. Hurst and T. G. Habetler, "A thermal monitoring and parameter tuning scheme for induction machines," in Conf. Rec. IEEE IAS Annu. Meeting, 1997, vol. 1, pp. 136-142.
8. M. A. Valenzuela, P. V. Verbakel, and J. A. Rooks, "Thermal evaluation for applying TEFC induction motors on short-time and intermittent duty cycles," IEEE Trans. Ind. Appl., vol. 39, no. 1, pp. 45-52, Jan./Feb. 2003.
9. J. F. Moreno, F. P. Hidalgo, and M. D. Martinez, "Realisation of tests to determine the parameters of the thermal model of an induction machine," Proc. Inst. Elect. Eng. - Elect. Power Appl., vol. 148, no. 5, pp. 393-397, Sep. 2001.
10. P. S. H. Nestler, "On-line estimation of temperatures in electrical machines by an observer," Elect. Mach. Power Syst., vol. 21, no. 1, pp. 39-50, Jan. 1993.
11. A. Bousbaine, M. McCormick, and W. F. Low, "In-situ determination of thermal coefficients for electrical machines," IEEE Trans. Energy Convers., vol. 10, no. 3, pp. 385-391, Sep. 1995.
12. P. H. Mellor, D. Roberts, and D. R. Turner, "Lumped parameter thermal model for electrical machines of TEFC design," Proc. Inst. Elect. Eng. - Elect. Power Appl., vol. 138, no. 5, pp. 205-218, Sep. 1991.
13. D. Staton, A. Boglietti, and A. Cavagnino, "Solving the more difficult aspects of electric motor thermal analysis in small and medium size industrial induction motors," IEEE Trans. Energy Convers., vol. 20, no. 3, pp. 620-628, Sep. 2005.
14. J. C. Lopez, L. Romeral, A. Arias, and E. Aldabas, "Novel fuzzy adaptive sensorless induction motor drive," IEEE Trans. Ind. Electron., vol. 53, no. 4, pp. 1170-1178, Jun. 2006.
15. J. Salomaki, M. Hinkkanen, and J. Luomi, "Sensorless control of induction motor drives equipped with inverter output filter," IEEE Trans. Ind. Electron., vol. 53, no. 4, pp. 1188-1197, Jun. 2006.
16. M. Cirricione, M. Pucci, G. Cirricione, and G. A. Capolino, "Sensorless control of induction motors by reduced order observer with MCA EXIN + based adaptive speed estimation," IEEE Trans. Ind. Electron., vol. 54, no. 1, pp. 150-166, Feb. 2007.
17. G. Qiang, G. Asher, and M. Sumner, "Sensorless position and speed control of induction motors using high-frequency injection and without offline precommissioning," IEEE Trans. Ind. Electron., vol. 54, no. 5, pp. 2474-2481, Oct. 2007.
18. B. Murat, B. Seta, and G. Metin, "Speed-sensorless estimation for induction motors using extended Kalman filters," IEEE Trans. Ind. Electron., vol. 54, no. 1, pp. 272-280, Feb. 2007.
19. S. B. Makarand, J. K. Zafar, M. S. Hiralal, and L. S. Ram, "Adaptive neural fuzzy inference system for the detection of inter-turn insulation and bearing wear faults in induction motor," IEEE Trans. Ind. Electron., vol. 54, no. 1, pp. 250-258, Feb. 2007.
20. J. H. Jung, J. J. Lee, and B. H. Kwon, "Online diagnosis of induction motors using MCSA," IEEE Trans. Ind. Electron., vol. 53, no. 6, pp. 1842-1852, Dec. 2006.
21. D. de Almeida Souza, W. C. P. de Aragao Filho, and G. C. D. Sousa, "Adaptive fuzzy controller for efficiency optimization of induction motors," IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 2157-2164, Aug. 2007.
22. B. Lu, T. G. Habetler, and R. G. Harley, "A survey of efficiency-estimation methods for in-service induction motors," IEEE Trans. Ind. Appl., vol. 42, no. 4, pp. 924-933, Jul./Aug. 2006.
23. B. Lu, T. G. Habetler, and R. G. Harley, "A nonintrusive and in-service motor-efficiency estimation method using air-gap torque with considerations of condition monitoring," IEEE Trans. Ind. Appl., vol. 44, no. 6, pp. 1666-1674, Nov./Dec. 2008.
24. R. Beguenane and M. E. H. Benbouzid, "Induction motors thermal monitoring by means of rotor resistance identification," IEEE Trans. Energy Convers., vol. 14, no. 3, pp. 566-570, Feb. 1999.
25. L. Sang-Bin, T. G. Habetler, R. G. Harley, and D. J. Gritter, "A stator and rotor resistance estimation technique for conductor temperature monitoring," in Conf. Rec. IEEE IAS Annu. Meeting, 2000, vol. 1, pp. 381-387.
26. B. Karanayil, M. F. Rahman, and C. Grantham, "Investigation of an on-line rotor resistance identification with a new stator resistance observer for induction motor drive using artificial neural networks," in Proc. IEEE 34th Annu. PESC, 2003, vol. 4, pp. 1883-1888.
27. S. B. Lee and T. G. Habetler, "An online stator winding resistance estimation technique for temperature monitoring of line-connected induction machines," IEEE Trans. Ind. Appl., vol. 39, no. 3, pp. 685-694, May/Jun. 2003.
28. P. Zhang, B. Lu, and T. G. Habetler, "A remote and sensorless stator winding resistance estimation method for thermal protection of soft-starter-connected induction machines," IEEE Trans. Ind. Electron., vol. 55, no. 10, pp. 3611-3618, Oct. 2008.
29. P. Zhang, Y. Du, B. Lu, and T. G. Habetler, "A DC signal injection-based thermal protection scheme for soft-starter-connected induction motors," IEEE Trans. Ind. Appl., vol. 45, no. 4, pp. 1351-1358, Jul./Aug. 2009.
30. S. B. Lee and T. G. Habetler, "A remote and sensorless thermal protection scheme for small line-connected ac machines," IEEE Trans. Ind. Appl., vol. 39, no. 5, pp. 1323-1332, Sep./Oct. 2003.
31. K. D. Hurst and T. G. Habetler, "Thermal monitoring and parameter tuning scheme for induction machines," in Conf. Rec. IEEE-IAS Annu. Meeting, 1997, vol. 1, pp. 136-142.
32. P. Milanfar and J. H. Lang, "Monitoring the thermal condition of permanent magnet synchronous motors," IEEE Trans. Aerosp. Electron. Syst., vol. 32, no. 4, pp. 1421-1429, Oct. 1996.
33. A. H. Jazwinski, Stochastic Processes and Filtering Theory. New York: Academic, 1970.
34. Thermal Evaluation and Classification of Electrical Insulation, IEC 60085, 2002.