Influence of the adhesive formulation on the mechanical properties and bonding performance of polyurethane prepolymers

Holzforschung

Volumn 65, Issue 6, 2011, Pages 835-844

  Clauß, Sebastian ^a   Gabriel, Joseph ^b   Karbach, Alexander ^c   Matner, Mathias ^d   Niemz, Peter ^a  

^a ETH ZURICH   (Switzerland)

^b Purbond AG   (Switzerland)

^c Bayer Industry Services GmbH and Co OHG   (Germany)

^d Formerly Baver Material Science AG   (Germany)

Author keywords

1C PUR; adhesives for wood; AFM; ATR; ESEM; film; FTIR; lap shear; mechanical properties; nano indentation; polyurethane; prepolymer

Indexed keywords

1C PUR; ADHESIVES FOR WOOD; AFM; ATR; ESEM; FTIR; LAP SHEAR; PREPOLYMERS;

ADHESIVES; FILMS; FORMALDEHYDE; MELAMINE FORMALDEHYDE RESINS; MONOMERS; NANOINDENTATION; PHENOLS; POLYURETHANES; TENSILE TESTING; UREA; UREA FORMALDEHYDE RESINS; WOODEN CONSTRUCTION;

MECHANICAL PROPERTIES;

EID: 80053607698     PISSN: 00183830     EISSN: 1437434X     Source Type: Journal    
DOI: 10.1515/HF.2011.095     Document Type: Article

References (38)

1. Bryne, L.E., Walinder, M.E.P. (2010) Ageing of modified wood. Part 1: Wetting properties of acetylated, furfurylated, and thermally modified wood. Holzforschung 64:295-304.
2. Clauß, S., Allenspach, K., Gabriel, J., Niemz, P. (2011a) Improving the thermal stability of one-component polyurethane adhesives by adding filler material. Wood Sci. Technol. 45:383-388.
3. Clauß, S., Dijkstra, D.J., Gabriel, J., Kläusler, O., Matner, M., Mec-kel, W., Niemz, P. (2011b) Influence of the chemical structure of PUR prepolymers on thermal stability. Int. J. Adhes. Adhes., in press (doi: 10.1016/j.ijadhadh.2011.05.005).
4. Clauß, S., Joscak, M., Niemz, P. (2011c) Thermal stability of glued wood joints measured by shear tests. Eur. J. Wood Prod. 69: 101-111.
5. DIN EN 302-1. (2004) Adhesives for loadbearing timber structures-Test methods-Part 1: Determination of bond strength in longitudinal tensile shear strength.
6. Donaldson, L. (2008) Microfibril angle: measurement, variation and relationships - A review. IAWA J. 29:345-386.
7. Forest Products Laboratory. Wood handbook-wood as an engineering material. University Press of the Pacific, Honolulu, Hawaii, 2000.
8. Gindl, W., Schöberl, T. (2004) The significance of the elastic modulus of wood cell walls obtained from nanoindentation measurements. Composites Part A. 35:1345-1349.
9. Gindl, W., Gupta, H., Schöberl, T., Lichtenegger, H., Fratzl, P. (2004) Mechanical properties of spruce wood cell walls by nanoindentation. Appl. Phys. A: Mater. Sci. Process. 79:2069-2073.
10. Gindl, W., Sretenovic, A., Vincenti, A., Müller, U. (2005) Direct measurement of strain distribution along a wood bond line. Part 2: Effects of adhesive penetration on strain distribution. Holz-forschung 59:307-310. (Pubitemid 40958804)
11. Haß, P., Wittel, F.K., Mendoza, M., Herrmann, H.J., Niemz, P. (2011) Adhesive penetration in beech wood: Exper. Wood Sci. Technol. DOI: 10.1007/s00226-011-0410-6.
12. Hse, C.Y., Kuo, M.I. (1988) Influence of extractives on wood gluing and finishing-a review. Forest Prod. J. 38:52-56.
13. Ionescu, M. Chemistry and technology of polyols for polyurethanes. Smithers Rapra Press, Shrewsbury, 2005.
14. ISO 527-3. (2003) Plastics-Determination of tensile properties-Part 3: Test conditions for films and sheets.
15. Jakes, J.E., Frihart, C.R., Beecher, J.F., Moon, R.J., Stone, D.S. (2008) Experimental method to account for structural compliance in nanoindentation measurements. J. Mater. Res. 23: 1113-1127. (Pubitemid 351618519)
16. Kamke, F.A., Lee, J.N. (2007) Adhesive penetration in wood-a review. Wood Fiber Sci. 39:205-220.
17. Konnerth, J., Gindl, W. (2006) Mechanical characterisation of wood-adhesive interphase cell walls by nanoindentation. Holz-forschung 60:429-433. (Pubitemid 44139351)
18. Konnerth, J., Jäger, A., Eberhardsteiner, J., Müller, U., Gindl, W. (2006) Elastic properties of adhesive polymers. II. Polymer films and bond lines by means of nanoindentation. J. Appl. Polym. Sci. 102:1234-1239. (Pubitemid 44518288)
19. Konnerth, J., Gindl, W., Müller, U. (2007a) Elastic properties of adhesive polymers. I. Polymer films by means of electronic speckle pattern interferometry. J. Appl. Polym. Sci. 103:3936-3939. (Pubitemid 46347232)
20. Konnerth, J., Valla, A., Gindl, W. (2007b) Nanoindentation mapping of a wood-adhesive bond. Appl. Phys. A: Mater. Sci. Process. 88:371-375. (Pubitemid 46934701)
21. Konnerth, J., Harper, D., Lee, S.-H., Rials, T.G., Gindl, W. (2008) Adhesive penetration of wood cell walls investigated by scanning thermal microscopy (SThM). Holzforschung 62:91-98. (Pubitemid 350223098)
22. Lucas, B.N., Rosenmayer, C.T., Oliver, W.C. (1998) Mechanical characterization of sub-micron polytetrafluoroethylene (PTFE) thin films. Thin-Films-Stresses Mech. Prop. Vii. 505:97-102.
23. Müller, U., Sretenovic, A., Vincenti, A., Gindl, W. (2005) Direct measurement of strain distribution along a wood bond line. Part 1: Shear strain concentration in a lap joint specimen by means of electronic speckle pattern interferometry. Holzforschung 59: 300-306. (Pubitemid 40958803)
24. Ni, J.W., Frazier, C.E. (1998) N-15 CP/MAS NMR study of the isocyanate/wood adhesive bondline. Effects of structural iso-merism. J. Adhes. 66:89-116. (Pubitemid 128485023)
25. Niemz, P. Physik des Holzes und der Holzwerkstoffe. DRW-Verlag, Leinfelden-Echterdingen, 1993.
26. Niemz, P., Allenspach, K. (2009) Studies on the influence of temperature and timber moisture on the failure behaviour of selected adhesives under tensile shear load. Bauphysik. 31:296-304.
27. Oliver, W.C., Pharr, G.M. (1992) An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7:1564-1583.
28. Shi, S.Q., Oppedal, A., Miller, G., Horstemeyer, M.F. (2006) Characterization of engineering wood adhesive behavior treated at elevated temperatures. In: Wood Adhesives. 2005. Ed. Frihart, C.R. November 2-4, 2005. San Diego, CA. pp. 163-169.
29. Siau, J.F. Transport processes in wood. Springer Series in Wood Science. Springer, Berlin, 1984.
30. Stanzl-Tschegg, S., Beikircher, W., Loidl, D. (2009) Comparison of mechanical properties of thermally modified wood at growth ring and cell wall level by means of instrumented indentation tests. Holzforschung 63:443-448.
31. Stöckel, F., Konnerth, J., Kantner, W., Moser, J., Gindl, W. (2010) Tensile shear strength of UF-and MUF-bonded veneer related to data of adhesives and cell walls measured by nanoindentation. Holzforschung 64:337-342.
32. Suomi-Lindberg, L., Pulkkinen, P., Nussbaum, R. (2002) Influence of the wood component on the bonding process and the properties of wood products. In: COST Action E13-State-of-the-art report-wood adhesion and glued products. Eds Dunky, M., Pizzi, A., Leemput, M.V., pp. 121-143.
33. Tze, W.T.Y., Wang, S., Rials, T.G., Pharr, G.M., Kelley, S.S. (2007) Nanoindentation of wood cell walls: continuous stiffness and hardness measurements. Composites Part A. 38:945-953. (Pubitemid 44909019)
34. VanLandingham, M.R., Villarrubia, J.S., Guthrie, W.F., Meyers, G.F. (2001) Nanoindentation of polymers: an overview. Macromolec-ular Symposia 167:15-43.
35. Vick, C.B., Okkonen, E.A. (1998) Strength and durability of one-part polyurethane adhesive bonds to wood. Forest Prod. J. 48:71-76. (Pubitemid 128566601)
36. Widsten, P., Gutowski, V.S., Li, S., Cerra, T., Molenaar, S., Spicer, M. (2006) Factors influencing timber gluability with one-part polyurethanes, studied with nine Australian timber species. Holzforschung 60:423-428. (Pubitemid 44139350)
37. Woods, G. The ICI polyurethanes book. Wiley, Chichester, 1990.
38. Wu, Y., Wang, S., Zhou, D., Xing, C., Zhang, Y. (2009) Use of nanoindentation and silviscan to determine the mechanical properties of 10 hardwood species. Wood Fiber Sci. 41:64-73.