Influence of heat transfer on the thermomechanical behavior of shape memory alloys

International Review of Mechanical Engineering

Volumn 5, Issue 2, 2011, Pages 329-339

  Morin, Claire ^a   Moumni, Ziad ^a   Zaki, Wael ^b  

^a IMSIA UMR CNRS 9219 EdF   (France)

^b KHALIFA UNIVERSITY   (United Arab Emirates)

Author keywords

Loading rate effect; Shape memory alloys; Superelasticity; Thermomechanical coupling

Indexed keywords

EID: 80053403784     PISSN: 19708734     EISSN: 25325655     Source Type: Journal    
DOI: None     Document Type: Article

References (89)

1. K. Tanaka and S. Nagaki, "A thermomechanical description of materials with internal variables in the process of phase transitions," Ingenieur Archiv, vol. 51, pp. 287-299, 1982.
2. K. Tanaka, S. Kobayashi, and Y. Sato, "Thermomechanics of transformation pseudoelasticity and shape memory effect in alloys," International Journal of Plasticity, vol. 2, no. 1, pp. 59-72, 1986.
3. L. C. Brinson and M. S. Huang, "Simplifications and comparisons of shape memory alloy constitutive models," Journal of Intelligent Material Systems and Structures, vol. 7, no. 1, pp. 108-114, 1996.
4. C. Liang and C. Rogers, "One-dimensional thermomechanical constitutive relations for shape memory materials," Journal of Intelligent Material Systems and Structures, vol. 1, pp. 207-234, 1990.
5. K. Tanaka, F. Nishimura, T. Hayashi, and C. Tobushi, and H Lexcellent, "Phenomenological analysis on subloops and cyclic behavior in shape memory alloys under mechanical and/or thermal loads," Mechanics of Materials, vol. 19, pp. 281-292, 1995.
6. Y. Ivshin and T. Pence, "A thermomechanical model for a one variant shape memory material," Journal of Intelligent Material Systems and Structures, vol. 5, pp. 455-473, 1994.
7. I. Muller and S. Seelecke, "Thermodynamic aspects of shape memory alloys," Mathematical and Computer Modelling, vol. 34, pp. 1307-1355, 2001.
8. M. Frémond, Non-smooth thermomechanics. Springer, 2001.
9. M. Frémond, "L'éducation des alliages à mémoire de forme," Revue Européenne des Eléments Finis, vol. 7, no. 8, pp. 35-46, 1998.
10. M. Savi, A. Paiva, A. Baeta-Neves, and P. M. C. L. Pacheco, "Phenomenological modeling and numerical simulation of shape memory alloys: a thermo-plastic-phase transformation coupled model," Journal of Intelligent Material Systems and Structures, vol. 3, pp. 261-273, 2002.
11. B. Raniecki, C. Lexcellent, and K. Tanaka, "Thermodynamic models of pseudoelastic behaviour of shape memory alloys," Archives of Mechanics, vol. 44, pp. 261-284, 1992.
12. D. Koistinen and R. Marburger, "A general equation prescribing the extent of the austenite-martensite transformation in pure ironcarbon alloys and plain carbon steels," Acta Metallurgica, vol. 7, pp. 59-60, 1959.
13. M. Boubakar, S. Myne, C. Lexcellent, and P. Boisse, "Analyse et prédiction 3d du comportement de structures en alliages à mémoire de forme à grandes déformations pseudoélastiques," Revue Européenne des Eléments Finis, vol. 7, no. 8, pp. 91-110, 1998.
14. C. Bouvet, S. Calloch, and C. Lexcellent, "A phenomenological model for pseudoelasticity of shape memory alloys under multiaxial proportional and nonproportional loadings," European Journal of Mechanics A-solids, vol. 23, no. 1, pp. 37-61, 2004.
15. S. Leclercq and C. Lexcellent, "A general macroscopic description of the thermomechanical behavior of shape memory alloys," Journal of the Mechanics and Physics of Solids, vol. 44, no. 6, pp. 953-980, 1996.
16. C. Lexcellent and G. Bourbon, "Thermodynamical model of cyclic behaviour of ti-ni and cu-zn-al shape memory alloys under isothermal undulated tensile tests," Mechanics of Materials, vol. 24, pp. 59-73, 1996.
17. C. Lexcellent, S. Leclercq, B. Gabry, and G. Bourbon, "The two way shape memory effect of shape memory alloys: an experimental study and a phenomenological model," International Journal of Plasticity, vol. 16, pp. 1155-1168, 2000.
18. B. Raniecki and C. Lexcellent, "Thermodynamics of isotropic pseudoelasticity in shape memory alloys," European Journal of Mechanics A-solids, vol. 17, pp. 185-205, 1998.
19. B. Raniecki, J. Reizner, and C. Lexcellent, "Anatomization of hysteresis loops in pure bending of ideal pseudoelastic sma beams," International Journal of Mechanical Sciences, vol. 43, pp. 1339-1368, 2001.
20. R. Abeyaratne and S. Kim, "Cyclic effects in shape-memory alloys: a one-dimensional continuum model," International Journal of Solids and Structures, vol. 34, pp. 3273-3289, 1997.
21. R. Abeyaratne, S. Kim, and J. Knowles, "A one-dimensional continuum modelfor shape-memory alloys," International Journal of Solids and Structures, vol. 31, pp. 2229-2249, 1994.
22. R. Abeyaratne and J. Knowles, "A continuum model of a thermoelastic solid capable of undergoing phase transitions," Journal of the, vol. 41, pp. 541-571, 1993.
23. Z. Bo and D. Lagoudas, "Thermomechanical modeling of polycrystalline smas under cyclic loading, part i: theoretical derivations," International Journal of Engineering Science, vol. 37, pp. 1089-1140, 1999.
24. Z. Bo and D. Lagoudas, "Thermomechanical modeling of polycrystalline smas under cyclic loading, part iii: evolution of plastic strains and two-way shape memory effect," International Journal of Engineering Science, vol. 37, pp. 1175-1203, 1999.
25. D. Lagoudas and Bo, "Thermomechanical modeling of polycrystalline smas under cyclic loading, part ii: material characterization and experimental results for a stable transformation cycle," International Journal of Engineering Science, vol. 37, pp. 1141-1173, 1999.
26. D. Lagoudas and Bo, "Thermomechanical modeling of polycrystalline smas under cyclic loading, part iv: modeling of minor hysteresis loops," International Journal of Engineering Science, vol. 37, pp. 1205-1249, 1999.
27. D. Lagoudas and S. Shu, "Residual deformation of active structures with sma actuators," International Journal of Mechanical Sciences, vol. 41, pp. 595-619, 1999.
28. D. Lagoudas and P. Entchev, "Modeling of transformationinduced plasticity and its effects on the behavior of porous shape memory alloys. part i: constitutive model for fully dense smas," Mechanics of Materials, vol. 36, pp. 865-892, 2004.
29. F. Auricchio, Shape-memory alloys: applications, micromechanics, macromodelling and numerical simulations. PhD thesis, University of California at Berkeley, 1995.
30. F. Auricchio and E. Sacco, "Thermo-mechanical modelling of a superelastic shape-memory wire under cyclic stretching-bending loadings," International Journal of Solids and Structures, vol. 38, no. 34/35, pp. 6123-6145, 2001.
31. F. Auricchio, S. Marha, and S. E., "Modelling of sma materials: training and two way memory effect," Computers and Structures, vol. 81, pp. 2301-2317, 2003.
32. A. Bekker and L. Brinson, "Temperature-induced phase transformation in a shape memory alloy: phase diagram based kinetics approach," Journal of the Mechanics and Physics of Solids, vol. 45, no. 6, pp. 949-988, 1997.
33. A. Bekker and L. Brinson, "Phase diagram based description of the hysteresis behavior of shape memory alloys," Acta Materialia, vol. 46, pp. 3649-3665, 1998.
34. M. Brocca, L. C. Brinson, and Z. Bazant, "Three-dimensional constitutive model for shape memory alloys based on microplane model," Journal of the Mechanics and Physics of Solids, vol. 50, no. 5, pp. 1051-1077, 2002.
35. X. Gao and L. Brinson, "A simplified multivariant sma model based on invariant plane nature of martensitic transformation," Journal of Intelligent Material Systems and Structures, vol. 13, pp. 795-810, 2002.
36. X. Gao, M. Huang, and L. Brinson, "A multivariant micromechanical model for smas part 1. crystallographic issues for single crystal model," International Journal of Plasticity, vol. 16, pp. 1345-1369, 2000.
37. M. Huang, X. Gao, and B. L., "A multivariant micromechanical model for smas part 2. polycrystal model," International Journal of Plasticity, vol. 16, pp. 1371-1390, 2000.
38. S. Silling, "Dynamic growth of martensitic plates in an elastic material," Journal of Elasticity, vol. 28, pp. 143-164, 1992.
39. J. A. Shaw and S. Kyriakides, "Thermomechanical aspects of niti," Journal of the Mechanics and Physics of Solids, vol. 43, no. 8, pp. 1243-1281, 1995.
40. J. A. Shaw and S. Kyriakides, "On the nucleation and propagation of phase transformation fronts in a niti alloy," Acta Materialia, vol. 45, no. 2, pp. 683-700, 1997.
41. J. A. Shaw, "A thermomechanical model for a 1-d shape memory alloy wire with propagating instabilities," International Journal of Solids and Structures, vol. 39, pp. 1275-1305, 2002.
42. Z. Li and Q. Sun, "The initiation and growth of macroscopic martensite band in nanograined niti microtube under tension," International Journal of Plasticity, vol. 18, pp. 1481-1498, 2002.
43. Q. Sun and Z. Li, "Phase transformation in superelastic niti polycrystalline microtubes under tension and torsion -from localization to homogeneous deformation," International Journal of Solids and Structures, vol. 39, pp. 3797-3809, 2002.
44. L. Orgeas, D. Favier, and G. Rio, "Déformation superélastique non homogène d'une éprouvette de traction niti. expérience et modélisation numérique," Revue Européenne des Eléments Finis, vol. 7, no. 8, pp. 111-136, 1998.
45. G. Tan, Y. Liu, P. Sittner, and M. Saunders, "Lüder-like deformation associated with stress-induced martensitic transformation in niti," Scripta Materialia, vol. 50, pp. 193-198, 2004.
46. B. Halphen and Q. S. Nguyen, "Sur les matériaux standards généralisés," Journal de Mécanique, vol. 14, pp. 39-63, 1975.
47. Z. Moumni, Sur la modélisation du changement de phase à l'état solide. PhD thesis, Ecole Nationale des Ponts et Chaussées, 1995.
48. Z. Moumni, W. Zaki, and Q. S. Nguyen, "Theoretical and numerical modeling of solid-solid phase change: Application to the description of the thermomechanical behavior of shape memory alloys," International Journal of Plasticity, vol. 24, no. 4, pp. 614-645, 2008.
49. W. Zaki and Z. Moumni, "A three-dimensional model of the thermomechanical behavior of shape memory alloys," Journal of the Mechanics and Physics of Solids, vol. 55, pp. 2455-2490, 2007.
50. W. Zaki and Z. Moumni, "A 3d model of the cyclic thermomechanical behavior of shape memory alloys," Journal of the Mechanics and Physics of Solids, vol. 55, pp. 2427-2454, 2007.
51. W. Zaki, "An approach to modeling tensile-compressive asymmetry for martensitic shape memory alloys," Smart Materials & Structures, vol. 19, no. 2, p. 025009, 2010.
52. W. Zaki, S. Zamfir, and Z. Moumni, "An extension of the zm model for shape memory alloys accounting for plastic deformation," Mechanics of Materials, vol. 42, no. 3, pp. 266-274, 2010.
53. J. Van Humbeeck and L. Delaey, "The influence of strain-rate, amplitude and temperature on the hysteresis of a pseudoelastic cuzn-al single-crystal," Journal De Physique, vol. 42, no. NC5, pp. 1007-1011, 1981.
54. S. Y. Zhu and Y. F. Zhang, "A thermomechanical constitutive model for superelastic sma wire with strain-rate dependence," Smart Materials & Structures, vol. 16, pp. 1696-1707, 2007.
55. K. Mukherjee, S. Sircar, and N. B. Dahotre, "Thermal effects associated with stress-induced martensitic-transformation in a ti-nialloy," Materials Science and Engineering, vol. 74, no. 1, pp. 75-84, 1985.
56. P. H. Leo, T. W. Shield, and O. P. Bruno, "Transient heat-transfer effects on the pseudoelastic behavior of shape-memory wires," Acta Metallurgica Et Materialia, vol. 41, no. 8, pp. 2477-2485, 1993.
57. Y. J. He, H. Yin, R. H. Zhou, and Q. P. Sun, "Ambient effect on damping peak of niti shape memory alloy," Materials Letters, vol. 64, no. 13, pp. 1483-1486, 2010.
58. P. G. McCormick, Y. Liu, and S. Miyazaki, "Intrinsic thermalmechanical behavior associated with the stress-induced martensitic-transformation in niti," Materials Science and Engineering A-structural Materials Properties Microstructure and Processing, vol. 167, no. 1-2, pp. 51-56, 1993.
59. C. Grabe and O. T. Bruhns, "On the viscous and strain rate dependent behavior of polycrystalline niti," International Journal of Solids and Structures, vol. 45, no. 7-8, pp. 1876-1895, 2008.
60. M. C. Piedboeuf, R. Gauvin, and M. Thomas, "Damping behaviour of shape memory alloys: Strain amplitude, frequency and temperature effects," Journal of Sound and Vibration, vol. 214, no. 5, pp. 885-901, 1998.
61. L. Heller, P. Sittner, J. Pilch, and M. Landa, "Factors controlling superelastic damping capacity of smas," Journal of Materials Engineering and Performance, vol. 18, no. 5-6, pp. 603-611, 2009.
62. H. Tobushi, T. Hachisuka, S. Yamada, and P. H. Lin, "Rotatingbending fatigue of a tini shape-memory alloy wire," Mechanics of Materials, vol. 26, no. 1, pp. 35-42, 1997.
63. A. Paradis, P. Terriault, V. Brailovski, and V. Torra, "On the partial recovery of residual strain accumulated during an interrupted cyclic loading of niti shape memory alloys," Smart Materials & Structures, vol. 17, no. 6, p. 065027, 2008.
64. Y. J. He and Q. P. Sun, "Frequency-dependent temperature evolution in niti shape memory alloy under cyclic loading," Smart Materials and Structures, vol. 19, no. 11, p. 115014, 2010.
65. C. Morin, Z. Moumni, and W. Zaki, "Thermomechanical coupling in shape memory alloys under cyclic loadings: experimental analysis and constitutive modeling," Submitted to International Journal of Plasticity, vol. Under Review, pp. -, 2010.
66. M. Kadkhodaei, R. K. N. D. Rajapakse, M. Mahzoon, and M. Salimi, "Modeling of the cyclic thermomechanical of response of sma wires at different strain rates," Smart Materials and Structures, vol. 16, no. 6, pp. 2091-2101, 2007.
67. A. Vitiello, G. Giorleo, and R. E. Morace, "Analysis of thermomechanical behaviour of nitinol wires with high strain rates," Smart Materials & Structures, vol. 14, no. 1, pp. 215-221, 2005.
68. C. Morin, Z. Moumni, and W. Zaki, "A constitutive model for shape memory alloys accounting for thermomechanical coupling," International Journal of Plasticity, vol. In Press, Corrected Proof, pp. -, 2010.
69. D. Entemeyer, E. Patoor, E. Eberhardt, and M. Berveiller, "Strain rate sensitivity in superelasticity (vol 16, pg 1269, 2000)," International Journal of Plasticity, vol. 17, no. 2, pp. 273-274, 2001.
70. R. Peyroux, A. Chrysochoos, C. Licht, and M. Lobel, "Thermomechanical couplings and pseudoelasticity of shape memory alloys," International Journal of Engineering Science, vol. 36, no. 4, pp. 489-509, 1998.
71. T. J. Lim and D. L. McDowell, "Cyclic thermomechanical behavior of a polycrystalline pseudoelastic shape memory alloy," Journal of the Mechanics and Physics of Solids, vol. 50, no. 3, pp. 651-676, 2002.
72. L. Brinson, "One-dimensional constitutive behavior of shape memory alloys: Thermomechanical derivation with non-constant material functions and redefined martensite internal variable," Journal of Intelligent Material Systems and Structures, vol. 4, pp. 229-242, April 1993.
73. K. N. Melton and O. Mercier, "Fatigue of niti thermoelastic martensites," Acta Metallurgica, vol. 27, no. 1, pp. 137-144, 1979.
74. S. Miyazaki, T. Imai, Y. Igo, and K. Otsuka, "Effect of cyclic deformation on the pseudoelasticity characteristics of ti-ni alloys," Metallurgical Transactions A-physical Metallurgy and Materials Science, vol. 17, no. 1, pp. 115-120, 1986.
75. J. Van Humbeeck, "Cycling effects, fatigue and degradation of shape memory alloys," Journal De Physique Iv, vol. 1, no. C, 4pp. 189-197, 1991.
76. N. Nayan, D. Roy, V. Buravalla, and U. Ramamurty, "Unnotched fatigue behavior of an austenitic ni-ti shape memory alloy," Materials Science and Engineering A-structural Materials Properties Microstructure and Processing, vol. 497, no. 1/2, pp. 333-340, 2008.
77. A. Isalgue, V. Torra, A. Yawny, and F. Lovey, "Metastable effects on martensitic transformation in sma," Journal of Thermal Analysis and Calorimetry, vol. 91, pp. 991-998, 2008. 10.1007/s10973-007-8604-8.
78. A. M. Figueiredo, P. Modenesi, and V. Buono, "Low-cycle fatigue life of superelastic niti wires," International Journal of Fatigue, vol. 31, no. 4, pp. 751-758, 2009.
79. N. Siredey, A. Hautcoeur, and A. Eberhardt, "Lifetime of superelastic cu-al-be single crystal wires under bending fatigue," Materials Science and Engineering A, vol. 396, no. 1/2, pp. 296-301, 2005.
80. S. Miyazaki, K. Mizukoshi, T. Ueki, T. Sakuma, and Y. Liu, "Fatigue life of ti-50 at.% ni and ti-40ni-10cu (at.%) shape memory alloy wires," Materials Science and Engineering A, vol. 273/275, pp. 658-663, 1999.
81. Z. Moumni, A. Van Herpen, and P. Riberty, "Fatigue analysis of shape memory alloys: energy approach," Smart Materials & Structures, vol. 14, no. 5, pp. S287-S292, 2005.
82. M. Wagner, T. Sawaguchi, G. Kausträter, D. Höffken, and G. Eggeler, "Structural fatigue of pseudoelastic niti shape memory wires," Materials Science and Engineering A, vol. 378, no. 1/2, pp. 105-109, 2004. European Symposium on Martensitic Transformation and Shape-Memory.
83. G. Eggeler, E. Hornbogen, A. Yawny, A. Heckmann, and M. Wagner, "Structural and functional fatigue of niti shape memory alloys," Materials Science and Engineering A, vol. 378, no. 1/2, pp. 24-33, 2004. European Symposium on Martensitic Transformation and Shape-Memory.
84. T. Sawaguchi, G. Kaustrater, A. Yawny, M. Wagner, and G. Eggeler, "Crack initiation and propagation in 50.9 at. pct ni-ti pseudoelastic shape-memory wires in bending-rotation fatigue," Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science, vol. 34A, no. 12, pp. 2847-2860, 2003.
85. H. Tobushi, T. Nakahara, Y. Shimeno, and T. Hashimoto, "Lowcycle fatigue of tini shape memory alloy and formulation of fatigue life," Journal of Engineering Materials and Technologytransactions of the Asme, vol. 122, no. 2, pp. 186-191, 2000.
86. R. Matsui, H. Tobushi, Y. Furuichi, and H. Horikawa, "Tensile deformation and rotating-bending fatigue properties of a highelastic thin wire, a superelastic thin wire, and a superelastic thin tube of niti alloys," Journal of Engineering Materials and Technology, vol. 126, no. 4, pp. 384-391, 2004.
87. W. Predki, M. Klönne, and A. Knopik, "Cyclic torsional loading of pseudoelastic niti shape memory alloys: Damping and fatigue failure," Materials Science and Engineering: A, vol. 417, no. 1/2, pp. 182-189, 2006.
88. S. Amiable, S. Chapuliot, A. Constantinescu, and A. Fissolo, "A comparison of lifetime prediction methods for a thermal fatigue experiment," International Journal of Fatigue, vol. 28, no. 7, pp. 692-706, 2006.
89. C. Morin, "Fatigue thermomécanique des matériaux à mémoire de forme.," Master's thesis, ENSTA-Paristech, 2008.