Contribution to dynamic characteristics of the cutting temperature in the drilling process considering one dimension heat flow

Applied Thermal Engineering

Volumn 31, Issue 17-18, 2011, Pages 3806-3813

  Brandao, Lincoln Cardoso ^a   Coelho, Reginaldo Teixeira ^b   Lauro, Carlos Henrique ^a  

^a FEDERAL UNIVERSITY OF SÃO JOÃO DEL REI   (Brazil)

^b UNIVERSITY OF SÃO PAULO   (Brazil)

Author keywords

AISI H13 Steel; Drilling; Inverse Heat Conduction Method; Temperature

Indexed keywords

AISI H13 STEEL; CUTTING TEMPERATURE; DRILLING OPERATION; DRILLING PROCESS; DRY CONDITION; DRY CUTTING; DRY MACHINING; DYNAMIC CHARACTERISTICS; EMBEDDED THERMOCOUPLES; HARDENED STEEL; HEAT CONDUCTION MODELS; INVERSE HEAT CONDUCTION METHODS; MACHINING PROCESS; ONE DIMENSION; TOOL-WORKPIECE;

DRILLING; DRILLS; HARDENING; HEAT CONDUCTION; HEAT CONVECTION; HEAT FLUX; HEAT TRANSFER COEFFICIENTS; TEMPERATURE; THERMOCOUPLES;

METAL CUTTING;

EID: 80052955896     PISSN: 13594311     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.applthermaleng.2011.07.024     Document Type: Conference Paper

References (28)

1. I. Lazoglu, and Y. Altintas Prediction of tool and chip temperature in continuous and interrupted machining International Journal of Machine Tools and Manufacture 42 9 July 2002 1011 1022 (Pubitemid 34771992)
2. H.S. Carslaw, and J.C. Jaeger Conduction of Heat in Solids second ed. 1985 Oxford London 510
3. Z.B. Hou, and R. Komanduri General solutions for stationary/moving plane heat source problems in manufacturing and tribology International Journal of Heat and Mass Transfer 43 2000 1679 1698 (Pubitemid 32131970)
4. J.L. Battaglia, J.C. Batsale, A. Oustaloup, and O. Cois Heat flux estimation through inverted non-integer identification models International Journal Thermal Science 39 2000 374 389
5. J. Lin Inverse estimation of the tool-work interface temperature in end milling International Journal of Machine Tools and Manufacture 35 1995 751 760
6. D.J. Richardson, M.A. Keavy, and F. Dailami Modeling of cutting induced workpiece temperatures for dry milling International Journal of Machine Tools & Manufacture 46 10 2006 1139 1145
7. E. Ruiz de Eguilaz, J. Rech, and P. Arrazola Influence of (Ca, Mn, S) steel's inclusions - TiN-coated carbide characterization of friction coefficient and heat partition coefficient between an AISI4140 steel and a influence of (Ca, Mn, S) steel's inclusions - TiN-coated carbide Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 224 2010 1115
8. J. Yvonnet, D. Umbrello, F. Chinesta, and F. Micari A simple inverse procedure to determine heat flux on the tool in orthogonal cutting International Journal of Machine Tools & Manufacture 46 7-8 2006 820 827
9. L.C. Brandão, and R.T. Coelho Temperature and heat flow when tapping of the hardened Steel using different cooling systems Ingeniare. Revista chilena de ingeniería 17 2 2009 267 274
10. I. Ren, and Y. Altintas Mechanics of machining with chamfered tools Transactions of ASME - Journal of Manufacturing and Engineering and Science 122 2000 650 659
11. J. Wu, and R.D. Han A new approach to predicting the maximum temperature in dry drilling based on a finite element model Journal of Manufacturing Processes 11 1 January 2009 19 30
12. M. Bono, and J. Ni The location of the maximum temperature on the cutting edges of a drill International Journal of Machine Tools and Manufacture 46 7-8 June 2006 901 907
13. D. Ulutan, I. Lazoglu, and C. Dinc Three-dimensional temperature predictions in machining processes using finite difference method Journal of Materials Processing Technology 209 2 19 January 2009 1111 1121
14. L.C. Brandão, R.T. Coelho, and A.T. Malavolta Experimental and theoretical study on workpiece temperature when tapping hardened AISI H13 using different cooling systems Journal of Brazilian Society Mechanical Science & Engineering 32 2 2010 154 159 10.1590/S1678-58782010000200008
15. M. Bono, and J. Ni A model for predicting the heat flow into the workpiece in dry drilling Journal of Manufacturing Science and Engineering 124 2002 773 777 (Pubitemid 35384296)
16. S.W. Kim, C.M. Lee, J.S. Kim, and Y.H. Jung Evaluation of the thermal characteristics in high speed ball end milling Journal Materials Processing Technology 113 2001 406 409 (Pubitemid 32518401)
17. L.C. Brandão, R.T. Coelho, and A.R. Rodrigues Experimental and theoretical study of workpiece temperature when end milling hardened steels using (TiAl)N-coated and PcBN-tipped tools Journal of Materials Processing Technology 199 1-3 2008 234 244
18. H. Elmoussami, and J.L. Battaglia A method to estimate the average temperature on the cutting edge tools. Application on the milling process International Journal of Experimental Heat Transfer 16 2 2003 1 20
19. J.V. Beck, B. Blackwell, and C.R. St.Clair Inverse heat conduction - Ill posed problem 1985 John Wiley Sons New York
20. C.Y. Yang The two dimensional retrospective heat conduction problem Journal of Applied Physics 31 1998 978 987
21. D. O'Sullivan, and M. Cotterell Temperature measurement in single point turning Journal of Materials Processing Technology 118 2001 301 308 (Pubitemid 33148002)
22. J. Wang, and Q. Zhang A study of high-performance plane rake faced twist drills. Part II: predictive force models International Journal of Machine Tools and Manufacture 48 11 2008 1276 1285
23. E.J.A. Armarego The unified-generalized mechanics of cutting approach a step towards a house of predictive performance models for machining operations Machining Science and Technology 4 2000 319 362 (Pubitemid 32136361)
24. M.C. Shaw Metal cutting principles. Oxford Series on Advanced Manufacturing second ed., 2005 Oxford University press. 649
25. L.A. Dobrzański, A. Śliwa, L.W. ukowska, J. Mikuła, and K. Gołombek Structure and mechanical properties of PVD coatings for tool materials Journal of Achievements in Materials and Manufacturing Engineering 42 1-2 2010 33 41
26. B. Tasdelen, T. Wikblom, and S. Ekered Studies on minimum quantity lubrication (MQL) and air cooling at drilling Journal of Materials Processing Technology 200 1-3 8 May 2008 339 346 (Pubitemid 351318176)
27. E.A. Rahim, and H. Sasahara A study of the effect of palm oil as MQL lubricant on high speed drilling of titanium alloys Tribology International 44 3 March 2011 309 317
28. R. Heinemann, S. Hinduja, G. Barrow, and G. Petuelli Effect of MQL on the tool life of small twist drills in deep-hole drilling International Journal of Machine Tools and Manufacture 46 1 January 2006 1 6 (Pubitemid 41497894)