Evaluation of axial surface residual stress in 0.82-wt% carbon steel wire during multi-pass drawing process considering heat generation

Materials and Design

Volumn 34, Issue , 2012, Pages 363-371

  Lee, Sang Kon ^a   Kim, Dae Woon ^b   Jeong, Myeong Sik ^a   Kim, Byung Min ^c  

^a Korea Institute of Industrial Technology   (South Korea)

^b Hyundai Motor Co   (South Korea)

^c Pusan National University   (South Korea)

Author keywords

A. High carbon steel wire; C. Drawing; E. Mechanical

Indexed keywords

CARBON STEEL WIRES; CROSS SECTION; DRAWING PROCESS; DRAWN WIRES; E. MECHANICAL; ELASTOPLASTIC FINITE ELEMENTS; FE ANALYSIS; HIGH CARBON STEEL WIRES; HIGH STRAINS; INHOMOGENEOUS DEFORMATION; MULTI-PASS; MULTI-PASS DRAWING; PREDICTION MODEL; STRESS PREDICTION; SURFACE RESIDUAL STRESS; TENSILE RESIDUAL STRESS;

CARBON; CARBON STEEL; DEFORMATION; EXPERIMENTS; FINITE ELEMENT METHOD; FORECASTING; HEAT GENERATION; MATHEMATICAL MODELS; MECHANICAL PROPERTIES; RESIDUAL STRESSES; WIRE; X RAY DIFFRACTION;

WIRE DRAWING;

EID: 80052772455     PISSN: 02641275     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2011.06.036     Document Type: Article

References (34)

1. Atienza J.M., Martinez-Perz M.L., Ruiz-Hervias J., Mompean F.J., Garcia-Hernandez M., Elices M. Residual stresses in cold drawn ferritic rods. Scripta Mater 2004, 52:305-309.
2. Atienza J.M., Ruiz-Hervias J., Martinez-Perz M.L., Mompean F.J., Garcia-Hernandez M., Elices M. Residual stresses in cold drawn pearlitic rods. Scripta Mater 2005, 52:1223-1228.
3. Yang F., Wang Y., Jiang J.Q., Fang F., Ma C., Zhao K.L., et al. Stress evolution of cold-drawn pearlitic steel wire subjected to uniaxial tension. Mater Sci Eng A 2008, 487:468-472.
4. Elices M. Influence of residual stresses in the performance of cold-drawn pearlitic wires. J Mater Sci 2004, 39:3889-3899.
5. Alvar E.N., Mohandesi J.A. Fatigue damage accumulation in cold-drawn patented steel wire under variable loading. Mater Des 2010, 31:2018-2024.
6. Stobbs W.M., Paetke S. The Bauschinger effect in cold drawn patented wire. Acta Metall 1985, 33(5):777-783.
7. Wilson D.V., Bate P.S. Reversibility in the work hardening of spheroidised steels. Acta Metall 1986, 34(6):1107-1120.
8. Llorca J, Sánchez-Gálvez V. Numerical determination of the influence of residual stresses on fatigue in computational plasticity. In: P int conf, Barcelona; April 1987. p. 1123-36.
9. Elices M., Maeder G., Sánchez-Gálvez V. Effect of surface residual stress on hydrogen embrittlement of prestressing steels. Brit Corros J 1983, 18(2):80-81.
10. Atienza J.M., Elices M. Influence of residual stresses in the tensile test of cold drawn wires. Mater Struct 2003, 36:548-552.
11. Elices M., Ruiz J., Atienza M. Influence of residual stresses on hydrogen embrittlement of cold drawn wires. Mater Struct 2004, 37(5):305-310.
12. overstam H. The influence of bearing geometry on the residual stress state in cold drawn wire, analysis by the FEM. J Mater Process Technol 2006, 171:446-450.
13. Alawode A.J., Adeyemi M.B. Effects of degrees of deformation and stress-relief temperatures on the mechanical properties and residual stresses of cold drawn mild steel rods. J Mater Process Technol 2005, 160:112-118.
14. Kuboki T., Akiyama M., Neishi Y., Kuroda K. Effect of final drawing with light reduction on the leveling of residual stress distribution in cold bar drawing. P I Mech Eng C-J Mec 2000, 214:1389-1399.
15. Kuboki T., Kawakami I., Neishi M., Kuroda K., Akiyama M. A study on the influence of mechanical properties on the distribution of axial residual stress after cold drawing of metallic bars. Mater Sci Res Int 2001, 7(1):41-46.
16. Kuboki T., Akiyama M., Neishi Y., Kuroda K. Effect of die geometry on residual stress level present after bar drawing. Ironmak Steelmak 2001, 28(1):65-71.
17. Akiyama M., Kuboki T. Reduction in residual stress after cold bar drawing. Adv Technol Plast 2002, 1:361-366.
18. Ko D.C., Lee S.K., Hwang W.H., Kim B.M., Bae C.M. The evaluation of residual stress on the drawn wire using nano-indentation test. J Mater Process Technol 2007, 91:64-67.
19. Asakawa M., Sasaki W., Shishidi S. Effect of die approach geometry and bearing length on residual stress after bar drawing. Wire J Int 2001, 68-72. [October].
20. Vijayakar S. Thermal influences on residual stresses in drawn wire - a finite element analysis. Wire J Int 1997, 116-119. [June].
21. Kuboki T., Nishida K., Sakaki T., Murata M. Effect of plug on levelling of residual stress in tube drawing. J Mater Process Technol 2008, 204:162-168.
22. Willemse P.F., Naughton B.P., Verbraak C.A. X-ray residual stress measurements on cold-drawn steel wire. Mater Sci Eng 1982, 56:25-37.
23. Ruiz J., Atienza J.M., Elices M. Residual stresses in wires: influence of wire length. J Mater Eng Perform 2003, 12(4):480-489.
24. Lin H.S., Hsu Y.C., Keh C.C. Inhomogeneous deformation and residual stress in skin-pass axisymmetric drawing. J Mater Process Technol 2008, 201:128-132.
25. Martinez-Perez M.L., Borlado C.R., Mompean F.J., Garcia-Hernandez M., Gil-Sevillano J., Ruiz-Hervias J., et al. Measurement and modeling of residual stresses in straightened commercial eutectoid steel rods. Acta Mater 2005, 53:4415-4425.
26. Yang F., Jiang J.Q., Wang Y., Ma C., Fang F., Zhao K.L., et al. Residual stress in pearlitic steel rods during progressively cold drawing measured by X-ray diffraction. Mater Lett 2008, 62:2219-2221.
27. Celentano D.J., Palacios M.A., Rojas E.L., Cruchaga M.A., Artigas A.A., Monsalve A.E. Simulation and experimental validation of multiple-step wire drawing processes. Finite Elem Anal Des 2009, 45:163-180.
28. Dowling N.E. Mechanical behavior of material-Engineering methods for deformation, fracture, and fatigue 1999, Prentice Hall, New Jersey. 2nd ed.
29. Bridgman P.W. Studies in large flow and fracture with special emphasis on the effects of hydrostatic pressure 1952, McGraw-Hill, New York. 1st ed.
30. Kemp I.P. Heat generation and strain ageing. Wire Ind 1987, 41-49. [January].
31. Siebel E., Kobitzsch R. Die erwärmung des ziehguters beim drahtziehen. Stahl Eisen 1943, 63:110-113. [in German].
32. Geleji A. Bildsame forming der metalle in rechnung und versuch 1960, Akademie-Verlag, [in German].
33. Martinez-Perez M.L., Mompean F.J., Ruiz-Hervias J., Borlado C.R., Atienza J.M., Garcia-Hernandez M., et al. Residual stress profiling in the ferrite and cementite phases of cold-drawn steel rods by synchrotron X-ray and neutron diffraction. Acta Mater 2004, 52:5303-5313.
34. Van Acker K., Root J., Van Houtte P., Aernoudt E. Neutron diffraction measurement of the residual stress in the cementite and ferrite phases of cold-drawing steel wires. Acta Mater 1996, 44(10):4039-4049.