-
1
-
-
0642313044
-
Reaction-Induced Phase Separation in Modified Thermosetting Polymers
-
Williams RJJ, Rozenberg BA, Pascault JP. Reaction-induced phase separation in modified thermosetting polymers. In: Koenis JL, editor. Advances in polymer science, volume 128: polymer analysis, polymer physics. Berlin: Springer; 1997. p. 95-156. (Pubitemid 127472675)
-
(1997)
Advances in Polymer Science
, vol.128
, pp. 95-156
-
-
Williams, R.J.J.1
Rozenberg, B.A.2
Pascault, J.-P.3
-
2
-
-
0001681523
-
Formulation and characterization of thermoset-thermoplastic blends
-
D.R. Paul C.B. Bucknall (eds). Wiley New York
-
Pascault JP, Williams RJJ. Formulation and characterization of thermoset-thermoplastic blends. In: Paul DR, Bucknall CB, editors. Polymer blends volume 1: formulation, chap 13. New York: Wiley; 2000. p. 379-415.
-
(2000)
Polymer Blends Volume 1: Formulation, Chap 13
, pp. 379-415
-
-
Pascault, J.P.1
Williams, R.J.J.2
-
4
-
-
0036881560
-
Characterization of an ABS-modified epoxy system
-
DOI 10.1002/pi.940, Polymers in the third millenium, Montpellier 2001. Part 2 or 2
-
J Cano A Torres MJ Abad L Barral FJ Díez J López 2002 Characterization of an ABS-modified epoxy system Polym Int 51 1268 1276 10.1002/pi.940 1:CAS:528:DC%2BD38XpslWmtbw%3D (Pubitemid 36230041)
-
(2002)
Polymer International
, vol.51
, Issue.11
, pp. 1268-1276
-
-
Cano, J.1
Torres, A.2
Abad, M.J.3
Barral, L.4
Diez, F.J.5
Lopez, J.6
Ramirez, C.7
-
5
-
-
0036809505
-
Dynamic mechanical analysis of an epoxy/thermoplastic blend: Polymerization induced phase separation
-
DOI 10.1002/pi.953
-
J López C Ramírez MJ Abad L Barral J Cano FJ Díez 2002 Dynamic mechanical analysis of an epoxy/thermoplastic blend: polymerization-induced phase separation Polym Int 51 1100 1106 10.1002/pi.953 (Pubitemid 35337621)
-
(2002)
Polymer International
, vol.51
, Issue.10
, pp. 1100-1106
-
-
Lopez, J.1
Ramirez, C.2
Abad, M.J.3
Barral, L.4
Cano, J.5
Diez, F.6
-
6
-
-
0031233927
-
Polyetherimide-modified epoxy networks: Influence of cure conditions on morphology and mechanical properties
-
E Girard-Reydet V Vicard JP Pascault H Sautereau 1997 Polyetherimide-modified epoxy networks: influence of cure conditions on morphology and mechanical properties J Appl Polym Sci 65 2433 2445 10.1002/(SICI)1097-4628(19970919)65:12<2433::AID-APP15>3.0.CO;2-1 1:CAS:528:DyaK2sXls1SjtLs%3D (Pubitemid 127564208)
-
(1997)
Journal of Applied Polymer Science
, vol.65
, Issue.12
, pp. 2433-2445
-
-
Girard-Reydet, E.1
Vicard, V.2
Pascault, J.P.3
Sautereau, H.4
-
7
-
-
1542472613
-
Study of the Effect of Poly(acrylonitrile-co-butadiene-co-styrene) on the Mechanical Properties of an Epoxy System
-
A Torres I López-de-Ullibarri MJ Abad L Barral J Cano S García-Garabal FJ Díez J López C Ramírez 2004 Study of the effect of poly(acrylonitrile-co-butadiene-co-styrene) on the mechanical properties of an epoxy system J Appl Polym Sci 92 461 467 10.1002/app.20014 1:CAS:528:DC%2BD2cXhslOltLo%3D (Pubitemid 38343454)
-
(2004)
Journal of Applied Polymer Science
, vol.92
, Issue.1
, pp. 461-467
-
-
Torres, A.1
Lopez-de-Ullibarri, I.2
Abad, M.J.3
Barral, L.4
Cano, J.5
Garcia-Garabal, S.6
Diez, F.J.7
Lopez, T.8
Ramirez, C.9
-
8
-
-
33845453624
-
Epoxy/poly(benzyl methacrylate) blends: Miscibility, phase separation on curing and morphology
-
DOI 10.1007/s10973-006-7895-5
-
C Arribas RM Masegosa C Salom E Arévalo SG Prolongo MG Prolongo 2006 Epoxy/poly(benxyl methacrylate) blends: miscibility, phase separation on curing and morphology J Therm Anal Calorim 86 3 693 698 10.1007/s10973-006-7895- 5 1:CAS:528:DC%2BD28XhtlWnt7bO (Pubitemid 44892370)
-
(2006)
Journal of Thermal Analysis and Calorimetry
, vol.86
, Issue.3
, pp. 693-698
-
-
Arribas, C.1
Masegosa, R.M.2
Salom, C.3
Arevalo, E.4
Prolongo, S.G.5
Prolongo, M.G.6
-
9
-
-
36349032196
-
Poly(methyl methacrylate)-modified vinyl ester thermosets: Morphology, volume shrinkage, and mechanical properties
-
DOI 10.1002/app.27006
-
WF Schroeder J Borrajo MI Aranguren 2007 Poly(methyl methacrylate)- modified vinyl ester thermosets: morphology, volume shrinkage, and mechanical properties J Appl Polym Sci 106 4007 4017 10.1002/app.27006 1:CAS:528: DC%2BD2sXhtlSisbbK (Pubitemid 350149366)
-
(2007)
Journal of Applied Polymer Science
, vol.106
, Issue.6
, pp. 4007-4017
-
-
Schroeder, W.F.1
Borrajo, J.2
Aranguren, M.I.3
-
10
-
-
1142268884
-
Effects of poly(methyl methacrylate)-based low-profile additives on the properties of cured unsaturated polyester resins. I. Miscibility, curing behavior, and glass-transition temperatures
-
DOI 10.1002/app.13557
-
JP Dong JG Huang FH Lee JW Roan YJ Huang 2004 Effect of poly(methyl methacrylate)-based low-profile additives on the properties of cured unsaturated polyester resins. I. Miscibility, curing behavior, and glass-transition temperatures J Appl Polym Sci 91 3369 3387 10.1002/app.13557 1:CAS:528:DC%2BD2cXht12lsLY%3D (Pubitemid 38212167)
-
(2004)
Journal of Applied Polymer Science
, vol.91
, Issue.5
, pp. 3369-3387
-
-
Dong, J.-P.1
Huang, J.-G.2
Lee, F.-H.3
Roan, J.-W.4
Huang, Y.-J.5
-
11
-
-
0034746607
-
Liquid rubber modified vinyl ester resins: Fracture and mechanical behavior
-
10.1016/S0032-3861(00)00773-4 1:CAS:528:DC%2BD3MXkslCgtA%3D%3D
-
ML Auad PM Frontini J Borrajo MI Aranguren 2001 Liquid rubber modified vinyl ester resins: fracture and mechanical behavior Polymer 42 3723 3730 10.1016/S0032-3861(00)00773-4 1:CAS:528:DC%2BD3MXkslCgtA%3D%3D
-
(2001)
Polymer
, vol.42
, pp. 3723-3730
-
-
Auad, M.L.1
Frontini, P.M.2
Borrajo, J.3
Aranguren, M.I.4
-
12
-
-
0036773484
-
Rubber modified vinyl ester resins of different molecular weights
-
DOI 10.1023/A:1020031701950
-
ML Auad M Proia J Borrajo MI Aranguren 2002 Rubber modified vinyl ester resins of different molecular weights J Mater Sci 37 4117 4126 10.1023/A:1020031701950 1:CAS:528:DC%2BD38Xmslaksrw%3D (Pubitemid 35251068)
-
(2002)
Journal of Materials Science
, vol.37
, Issue.19
, pp. 4117-4126
-
-
Auad, M.L.1
Proia, M.2
Borrajo, J.3
Aranguren, M.I.4
-
13
-
-
14844354862
-
Comparison of morphologies and mechanical properties of crosslinked epoxies modified by polystyrene and poly(methyl methacrylate)) or by the corresponding block copolymer polystyrene-b-poly(methyl methacrylate)
-
DOI 10.1016/j.polymer.2005.02.012, PII S0032386105001448
-
IA Zucchi MJ Galante RJJ Williams 2005 Comparison of morphologies and mechanical properties of crosslinked epoxies modified by polystyrene and poly(methyl methacrylate) or by the corresponding block copolymer polystyrene-b-poly(methyl methacrylate) Polymer 46 2603 2609 10.1016/j.polymer.2005.02.012 1:CAS:528:DC%2BD2MXit1eltrc%3D (Pubitemid 40353687)
-
(2005)
Polymer
, vol.46
, Issue.8
, pp. 2603-2609
-
-
Zucchi, I.A.1
Galante, M.J.2
Williams, R.J.J.3
-
14
-
-
62349122536
-
Polymer blends based on an epoxy-amine thermoset and a thermoplastic
-
10.1007/s10973-008-9237-2
-
J López M Rico B Montero J Díez C Ramírez 2009 Polymer blends based on an epoxy-amine thermoset and a thermoplastic J Therm Anal Calorim 95 2 369 376 10.1007/s10973-008-9237-2
-
(2009)
J Therm Anal Calorim
, vol.95
, Issue.2
, pp. 369-376
-
-
López, J.1
Rico, M.2
Montero, B.3
Díez, J.4
Ramírez, C.5
-
15
-
-
34648832255
-
Thermal behaviour of styrene butadiene rubber/poly(ethylene-co-vinyl acetate) blends : TTTTG and DSC analysis
-
DOI 10.1007/s10973-006-7559-5
-
CK Radhakrishnan A Sujith G Unnikrishnan 2007 Thermal behaviour of styrene butadiene rubber/poly(ethylene-co-vinyl acetate) blends TG and DSC analysis J Therm Anal Calorim 90 1 191 199 10.1007/s10973-006-7559-5 1:CAS:528:DC%2BD2sXhtVOltrbO (Pubitemid 47462418)
-
(2007)
Journal of Thermal Analysis and Calorimetry
, vol.90
, Issue.1
, pp. 191-199
-
-
Radhakrishnan, C.K.1
Sujith, A.2
Unnikrishnan, G.3
-
16
-
-
0037648145
-
Thermal properties of amine cured diglycidyl ether of bisphenol A epoxi blended with poly(ether imide)
-
10.1016/S0040-6031(99)00336-6 1:CAS:528:DC%2BD3cXislyiuw%3D%3D
-
L Barral J Cano J López I López-Bueno P Nogueira C Ramírez A Torres MJ Abad 2000 Thermal properties of amine cured diglycidyl ether of bisphenol A epoxi blended with poly(ether imide) Thermochim Acta 344 137 143 10.1016/S0040-6031(99)00336-6 1:CAS:528:DC%2BD3cXislyiuw%3D%3D
-
(2000)
Thermochim Acta
, vol.344
, pp. 137-143
-
-
Barral, L.1
Cano, J.2
López, J.3
López-Bueno, I.4
Nogueira, P.5
Ramírez, C.6
Torres, A.7
Abad, M.J.8
-
17
-
-
33845968862
-
Study of an epoxy system cured with different diamines by differential scanning calorimetry
-
DOI 10.1002/app.25074
-
C Ramírez M Rico J López B Montero R Montes 2007 Study of an epoxy system cured with different diamines by differential scanning calorimetry J Appl Polym Sci 103 1759 1768 10.1002/app.25074 (Pubitemid 46051627)
-
(2007)
Journal of Applied Polymer Science
, vol.103
, Issue.3
, pp. 1759-1768
-
-
Ramirez, C.1
Rico, M.2
Lopez, J.3
Montero, B.4
Montes, R.5
-
18
-
-
30544446952
-
Thermal degradation behaviors of polypropylene with novel silicon-containing intumescent flame retardant
-
DOI 10.1002/app.21944
-
Q Li H Zhong P Wei P Jiang 2005 Thermal degradation behaviors of polypropylene with novel silicon-containing intumescent flame retardant J Appl Polym Sci 98 2487 2492 10.1002/app.21944 1:CAS:528:DC%2BD2MXhtF2kt77I (Pubitemid 43080853)
-
(2005)
Journal of Applied Polymer Science
, vol.98
, Issue.6
, pp. 2487-2492
-
-
Li, Q.1
Zhong, H.2
Wei, P.3
Jiang, P.4
-
19
-
-
33748525569
-
Kinetic method by using calorimetry to mechanism of epoxy-amine cure reaction: Part VIII. A comparative study of some epoxy-amine reactions
-
DOI 10.1007/s10973-005-7144-3
-
RM Vinnik VA Roznyatovsky 2006 Kinetic method by using calorimetry to mechanism of epoxy-amine cure reaction. Part VIII. A comparative study of some epoxy-amine reactions J Therm Anal Calorim 85 2 455 461 10.1007/s10973-005-7144- 3 1:CAS:528:DC%2BD28Xptlagtrg%3D (Pubitemid 44371084)
-
(2006)
Journal of Thermal Analysis and Calorimetry
, vol.85
, Issue.2
, pp. 455-461
-
-
Vinnik, R.M.1
Roznyatovsky, V.A.2
-
20
-
-
0034138301
-
Effect of poly(styrene-co-acrylonitrile) on the curing of an epoxy/amine resin
-
PII S0032386100004730
-
J López I López-Bueno P Nogueira C Ramírez MJ Abad L Barral J Cano 2001 Effect of poly(styrene-co-acrylonitrile) on the curing of an epoxy/amine resin Polymer 42 1669 1677 10.1016/S0032-3861(00)00473-0 (Pubitemid 33717677)
-
(2001)
Polymer
, vol.42
, Issue.4
, pp. 1669-1677
-
-
Lopez, J.1
Lopez-Bueno, I.2
Nogueira, P.3
Ramirez, C.4
Abad, M.J.5
Barral, L.6
Cano, J.7
-
21
-
-
0343759470
-
Determination of the interaction parameter of partially or totally compatible systems through glass transition temperature measurements
-
DOI 10.1016/0014-3057(96)00006-7, PII S0014305796000067
-
C Del Río JL Acosta 1996 Determination of the interaction parameter of partially or totally compatible systems through glass transition temperature measurements Eur Polym J 32 7 913 917 10.1016/0014-3057(96)00006-7 (Pubitemid 126359844)
-
(1996)
European Polymer Journal
, vol.32
, Issue.7
, pp. 913-917
-
-
Del Rio, C.1
Acosta, J.L.2
-
22
-
-
0032631251
-
Design of morphology in PMMA-modified epoxy resins by control of curing conditions. I. Phase behavior
-
10.1002/(SICI)1097-4628(19991024)74:4<772::AID-APP3>3.0.CO;2-S 1:CAS:528:DyaK1MXlvVSqtb4%3D
-
PM Remiro CC Riccardi MA Corcuera I Mondragon 1999 Design of morphology in PMMA-modified epoxy resins by control of curing conditions. I. Phase behavior J Appl Polym Sci 74 772 780 10.1002/(SICI)1097-4628(19991024)74:4<772::AID- APP3>3.0.CO;2-S 1:CAS:528:DyaK1MXlvVSqtb4%3D
-
(1999)
J Appl Polym Sci
, vol.74
, pp. 772-780
-
-
Remiro, P.M.1
Riccardi, C.C.2
Corcuera, M.A.3
Mondragon, I.4
-
23
-
-
70350354687
-
Thermoplastic-modified epoxy resins cured with different functionalities amine mixtures. Kinetics and miscibility study
-
10.1007/s10973-009-0174-5 1:CAS:528:DC%2BD1MXhtlWgtL3P
-
M Blanco M López R Fernández L Martín CC Riccardi I Mondragon 2009 Thermoplastic-modified epoxy resins cured with different functionalities amine mixtures. Kinetics and miscibility study J Therm Anal Calorim 97 969 978 10.1007/s10973-009-0174-5 1:CAS:528:DC%2BD1MXhtlWgtL3P
-
(2009)
J Therm Anal Calorim
, vol.97
, pp. 969-978
-
-
Blanco, M.1
López, M.2
Fernández, R.3
Martín, L.4
Riccardi, C.C.5
Mondragon, I.6
-
24
-
-
68749089668
-
Thermoplastic-modified epoxy resins cured with different functionalities amine mixtures. Morphology, thermal behavior, and mechanical properties
-
10.1002/app.30616 1:CAS:528:DC%2BD1MXps12hs7g%3D
-
M Blanco M López P Alvarez De Arcaya JA Ramos G Kortaberria CC Riccardi I Mondragon 2009 Thermoplastic-modified epoxy resins cured with different functionalities amine mixtures. Morphology, thermal behavior, and mechanical properties J Appl Polym Sci 114 1753 1760 10.1002/app.30616 1:CAS:528:DC%2BD1MXps12hs7g%3D
-
(2009)
J Appl Polym Sci
, vol.114
, pp. 1753-1760
-
-
Blanco, M.1
López, M.2
Alvarez De Arcaya, P.3
Ramos, J.A.4
Kortaberria, G.5
Riccardi, C.C.6
Mondragon, I.7
-
25
-
-
0002176738
-
Heat of polymerization of phenyl glycidyl ether and of an epoxy resin
-
10.1002/app.1961.070051313
-
CH Klute W Viehmann 1961 Heat of polymerization of phenyl glycidyl ether and of an epoxy resin J Appl Polym Sci 13 86 95 10.1002/app.1961.070051313
-
(1961)
J Appl Polym Sci
, vol.13
, pp. 86-95
-
-
Klute, C.H.1
Viehmann, W.2
-
26
-
-
0029638087
-
Epoxy-aromatic diamine kinetics. 2. Influence on epoxy-amine network formation
-
10.1021/ma00127a004 1:CAS:528:DyaK2MXos1yisb4%3D
-
E Girard-Reydet CC Riccardi H Sautereau JP Pascault 1995 Epoxy-aromatic diamine kinetics. 2. Influence on epoxy-amine network formation Macromolecules 28 7608 7611 10.1021/ma00127a004 1:CAS:528:DyaK2MXos1yisb4%3D
-
(1995)
Macromolecules
, vol.28
, pp. 7608-7611
-
-
Girard-Reydet, E.1
Riccardi, C.C.2
Sautereau, H.3
Pascault, J.P.4
-
29
-
-
84889306151
-
Application to thermoplastics and rubbers
-
P. Gabbott (eds). Blackwell Publishing Oxford
-
Forrest MJ. Application to thermoplastics and rubbers. In: Gabbott P, editor. Principles and applications of thermal analysis, chap 6. Oxford: Blackwell Publishing; 2008. p. 191-212.
-
(2008)
Principles and Applications of Thermal Analysis, Chap 6
, pp. 191-212
-
-
Forrest, M.J.1
-
30
-
-
0036875605
-
Hibrid organic-inorganic polymer networks based on the copolymerization of methacryloxypropyl-silsesquioxanes and styrene
-
10.1002/masy.200290004 1:CAS:528:DC%2BD3sXmtFaqsg%3D%3D
-
P Eisenberg JC Lucas RJJ Williams 2002 Hibrid organic-inorganic polymer networks based on the copolymerization of methacryloxypropyl-silsesquioxanes and styrene Macromol Symp 189 1 13 10.1002/masy.200290004 1:CAS:528: DC%2BD3sXmtFaqsg%3D%3D
-
(2002)
Macromol Symp
, vol.189
, pp. 1-13
-
-
Eisenberg, P.1
Lucas, J.C.2
Williams, R.J.J.3
-
31
-
-
14644392233
-
Thermodynamic, morphological, mechanical and fracture properties of poly(methyl methacrylate)(PMMA) modified divinylester(DVE)/styrene(St) thermosets
-
DOI 10.1016/j.polymer.2005.01.019, PII S003238610500042X
-
WF Schroeder ML Auad MA Barcia Vico J Borrajo MI Aranguren 2005 Thermodynamic, morphological, mechanical and fracture properties of poly(methyl methacrylate) (PMMA) modified divinylester(DVE)/styrene(St) thermosets Polymer 46 2306 2319 10.1016/j.polymer.2005.01.019 1:CAS:528:DC%2BD2MXhvVSltrw%3D (Pubitemid 40311700)
-
(2005)
Polymer
, vol.46
, Issue.7
, pp. 2306-2319
-
-
Schroeder, W.F.1
Auad, M.L.2
Barcia Vico, M.A.3
Borrajo, J.4
Aranguren, M.I.5
-
32
-
-
0001544167
-
Solid state transition behavior of blends
-
D.R. Paul S. Newman (eds). Academic Press Inc. San Diego
-
MacKnight WJ, Karasz FE, Fried JR. Solid state transition behavior of blends. In: Paul DR, Newman S, editors. Polymer blends, chap 5, vol. 1. San Diego: Academic Press Inc.; 1978. p. 185.
-
(1978)
Polymer Blends, Chap 5
, vol.1
, pp. 185
-
-
MacKnight, W.J.1
Karasz, F.E.2
Fried, J.R.3
-
33
-
-
0020859959
-
Applications of thermal analysis to the study of polymer blends
-
Fried JR. Applications of thermal analysis to the study of polymer blends. In: Dawkins JV, editor. Developments in polymer characterization, chap 2, vol. 4. London: Applied Science Publishers; 1983. p. 39-90. (Pubitemid 17481819)
-
(1983)
Dev Polym Charact
, pp. 39-90
-
-
Fried, J.R.1
-
34
-
-
0021559473
-
Properties and morphology of poly(methyl methacrylate)/bisphenol A polycarbonate blends
-
C.D. Han (eds). American Chemical Society Washington, DC. 10.1021/ba-1984-0206.ch009
-
Gardlund ZG. Properties and morphology of poly(methyl methacrylate)/bisphenol A polycarbonate blends. In: Han CD, editor. Polymer blends and composites in multiphase systems, Advances in chemistry series 206, chap 9. Washington, DC: American Chemical Society; 1984. p. 129-48.
-
(1984)
Polymer Blends and Composites in Multiphase Systems, Advances in Chemistry Series 206, Chap 9
, pp. 129-148
-
-
Gardlund, Z.G.1
-
35
-
-
1942473825
-
Thermodynamic analysis of the phase separation during the polymerization of a thermoset system into a thermoplastic matrix. I. Effect of composition on cloud-point curves
-
10.1002/polb.20004 1:CAS:528:DC%2BD2cXivFCnsLg%3D
-
CC Riccardi J Borrajo L Meynie F Fenouillot JP Pascault 2004 Thermodynamic analysis of the phase separation during the polymerization of a thermoset system into a thermoplastic matrix. I. Effect of composition on cloud-point curves J Polym Sci B 42 1351 1360 10.1002/polb.20004 1:CAS:528:DC%2BD2cXivFCnsLg%3D
-
(2004)
J Polym Sci B
, vol.42
, pp. 1351-1360
-
-
Riccardi, C.C.1
Borrajo, J.2
Meynie, L.3
Fenouillot, F.4
Pascault, J.P.5
|