Exploiting switching transients for broken rotor bar detection in inverter-fed induction machines at all operating conditions

2011 IEEE International Electric Machines and Drives Conference, IEMDC 2011

Volumn , Issue , 2011, Pages 418-423

  Nussbaumer, P ^a   Stojicic, G ^a   Wolbank, Th M ^a  

^a VIENNA UNIVERSITY OF TECHNOLOGY   (Austria)

Author keywords

Fault diagnosis; Harmonic analysis; Induction machines; Induction motor protection; Monitoring; Neural networks; Pulse width modulated inverters; Squirrel cage motors; Transient response

Indexed keywords

BROKEN ROTOR BAR; COMPENSATION STRATEGY; CONTROL DYNAMIC; DETECTION APPROACH; DETECTION TECHNOLOGY; FAST SWITCHING; FAULT INDICATORS; FAULTY CONDITION; INDUCTION MACHINES; INDUCTION MOTOR PROTECTION; INVERTER SWITCHINGS; LOAD CHANGE; LOAD CONDITION; LOAD LEVELS; MEASUREMENT RESULTS; OPERATING CONDITION; PULSE-WIDTH-MODULATED INVERTER; ROTOR BARS; ROTOR FAULT; SQUIRREL-CAGE; SWITCHING TRANSIENT; TRANSIENT FLUXES; VOLTAGE PULSE;

ASYNCHRONOUS MACHINERY; DRIVES; ELECTRIC DRIVES; ELECTRIC MACHINERY; ELECTRIC POTENTIAL; HARMONIC ANALYSIS; NEURAL NETWORKS; POWER QUALITY; ROTORS (WINDINGS); SQUIRREL CAGE MOTORS;

FAULT DETECTION;

EID: 80052554889     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/IEMDC.2011.5994630     Document Type: Conference Paper

References (22)

1. A. H. Bonnet and C. Yung, "Increased efficiency versus increased reliability," IEEE Industry Applications Magazine, vol.14, no.1, pp.29-36, 2008.
2. IEEE Committee Report, "Report of large motor reliability survey of industrial and commercial installation, Part I," IEEE Transactions on Industry Applications, vol.21, no.4, pp.853-864, Jul./Aug. 1985.
3. IEEE Committee Report, "Report of large motor reliability survey of industrial and commercial installation, Part II," IEEE Transactions on Industry Applications, vol.21, no.4, pp.865-872, Jul./Aug. 1985.
4. M. Hodowanec and W. R. Finley, "Copper versus Aluminum-Which Construction is Best?," IEEE Industry Applications Magazine, vol.8, no.4, pp. 14-25, 2002.
5. A. Bellini, F. Filippetti, C. Tassoni and G. Capolino, "Advances in Diagnostic Techniques for Induction Machines," IEEE Transactions on Industrial Electronics, vol.55, no.12, pp.4109-4126, 2008.
6. W. Le Roux, R. G. Harley and T. G. Habetler, "Detecting Rotor Faults in Low Power Permanent Magnet Synchronous Machines," IEEE Transactions on Power Electronics, vol.22, no.1, pp.322-328, 2007.
7. A. Khezzar, M. Y. Kaikaa, M. E. K. Oumaamar, M. Boucherma, and H. Razik, "On the use of SLot harmonics as a potential indicator of rotor bar breakage in the induction machine," IEEE Trans. Ind. Electron., vol. 56, no. 11, pp. 4592-4605, 2009.
8. S.H. Kia, H. Henao and G. Capolino, "Diagnosis of Broken Bar Fault in Induction Machines Using Discrete Wavelet Transform without Slip Estimation," IEEE Transactions on Industry Applications, vol.45, no.4, pp.1395-1404, 2009.
9. M. Riera-Guasp, J. A. Antonino-Daviu, M. Pineda-Sanchez, R. Puche-Panadero and J. Perez-Cruz, "A General Approach for the Transient Detection of Slip-Dependent Fault Components Based on the Discrete Wavelet Transform," IEEE Transactions on Industrial Electronics, vol.55, no.12, pp.4167-4180, 2008.
10. M. Haji and H. A. Toliyat, "Pattern Recognition-a Technique for Induction Machines Rotor Fault Detection eccentricity and Broken Bar Fault," Proceedings of Industry Applications Annual Conference IAS, vol.3, pp.1572-1578, 2001
11. B. Ayhan, M.-Y. Chow and M.-H. Song, "Multiple Discriminant Analysis and Neural-Network-Based Monolith and Partition Fault-Detection Schemes for Broken Rotor Bar in Induction Motors," IEEE Transactions on Industrial Electronics, vol.53, no.4, pp.1298-1308, 2006.
12. F. Filippetti, G. Franceschini and C. Tassoni, "Neural networks aided on-line diagnostics of induction motor rotor faults," IEEE Transactions on Industry Applications, vol.31, no.4, pp.892-899, 1995.
13. M. Blödt, D. Bonacci, J. Regnier, M. Chabert and J. Faucher, "On-Line Monitoring of Mechanical Faults in Variable-Speed Induction Motor Drives Using the Wigner Distribution," IEEE Transactions on Industrial Electronics, pp.522-531, 2008.
14. C. Kral, F. Pirker, G. Pascoli, H. Kapeller, "Robust Rotor Fault Detection by Means of the Vienna Monitoring Method and a Parameter Tracking Technique," IEEE Transactions on Industrial Electronics, vol.55, no.12, pp. 4229-4237, 2008.
15. S. M. Cruz, A. Stefani, F. Filippetti and A. J. Marques Cardoso, "A New Model-Based Technique for the Diagnosis of Rotor Faults in RFOC Induction Motor Drives," IEEE Transactions on Industrial Electronics, vol.55, no.12, pp.4218-4228, 2008.
16. B. Akin, U. Orguner, H. Toliyat, and M. Rayner, "Low order PWM inverter harmonics contributions to the inverter-fed induction machine fault diagnosis," IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 610-619, Feb. 2008.
17. C. Bruzzese, "Analysis and application of particular current signatures (symptoms) for cage monitoring in nonsinusoidally fed motors with high rejection to drive load, inertia, and frequency variations," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4137-4155, Dec. 2008.
18. B. Kim, K. Lee, J. Yang, S. B. Lee, E. Wiedenbrug and M. Shah, "Automated detection of rotor faults for inverter-fed induction machines under standstill conditions," IEEE Energy Conversion Congress and Exposition, pp.2277-2284, 2009.
19. C. Concari, G. Franceschini and C. Tassoni, "Self-commissioning procedures to detect parameters in healthy and faulty induction drives," Proceedings of IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, SDEMPED, pp.1-6, 2009.
20. T.M. Wolbank, P. Nussbaumer, H. Chen, and P. Macheiner, "Non-invasive detection of rotor cage faults in inverter fed induction machines at no load and low speed", Proceedings of IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, SDEMPED, pp.1-7, 2009.
21. T.M. Wolbank, M.A. Vogelsberger, R. Stumberger, S. Mohagheghi, T.G. Habetler, R.G. Harley, "Comparison of Neural Network Types and Learning Methods for Self Commissioning of Speed Sensorless Controlled Induction Machines," IEEE Power Electronics Specialists Conference, 2007. PESC 2007, pp.1955-1960, 2007.
22. S.S.Haykin, "Neural Networks: A Comprehensive Foundation," Prentice Hall, 2nd Edition, ISBN 0-1327-3350-1, 1998.