메뉴 건너뛰기




Volumn 36, Issue 18, 2011, Pages 11914-11928

A coupled 3D thermofluid-thermomechanical analysis of a planar type production scale SOFC stack

Author keywords

CFD; Elastoplasticity; FEM; Multiphysics; SOFC; Thermomechanics

Indexed keywords

AIR CHANNELS; ELASTOPLASTIC BEHAVIOUR; FEASIBILITY STUDIES; FLOW BEHAVIOURS; FUEL CELL STACK; FULL SCALE; GEOMETRICAL EFFECT; GLASS-CERAMIC SEALANT; INTERCONNECTORS; MULTIPHYSICS; PHYSICAL RESOLUTION; PRODUCTION SCALE; SOFC STACK; THERMO-MECHANICAL; THERMO-MECHANICS; THERMOFLUIDS; THERMOMECHANICAL MODELLING; WIRE MESHES;

EID: 80052175603     PISSN: 03603199     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijhydene.2011.06.045     Document Type: Article
Times cited : (85)

References (34)
  • 1
    • 0036716828 scopus 로고    scopus 로고
    • Influence of connector design on fracture Probability of ceramic fixed-partial dentures
    • W. Oh, N. Götzen, and K.J. Anusavice Influence of connector design on fracture Probability of ceramic fixed-partial dentures Journal of Dental Research 81 9 2002 623 627
    • (2002) Journal of Dental Research , vol.81 , Issue.9 , pp. 623-627
    • Oh, W.1    Götzen, N.2    Anusavice, K.J.3
  • 4
    • 0005265159 scopus 로고
    • Cowan, the effect of hydrogen and strain rate on the "ductile- brittle" behaviour of zircaloy
    • A. Fearnehough Cowan, the effect of hydrogen and strain rate on the "ductile-brittle" behaviour of zircaloy Journal of Nuclear Materials 22 2 1967 137 147
    • (1967) Journal of Nuclear Materials , vol.22 , Issue.2 , pp. 137-147
    • Fearnehough, A.1
  • 6
    • 0021434312 scopus 로고
    • Thermal stress resistance of engineering ceramics
    • D.P.H. Hasselman Thermal stress resistance of engineering ceramics Materials Science and Engineering 71 1985 251 264
    • (1985) Materials Science and Engineering , vol.71 , pp. 251-264
    • Hasselman, D.P.H.1
  • 9
    • 79952537532 scopus 로고    scopus 로고
    • Hierarchical 3D multiphysics modelling in the design and optimisation of SOFC system components
    • M. Peksen, Peters Ro, L. Blum, and D. Stolten Hierarchical 3D multiphysics modelling in the design and optimisation of SOFC system components International Journal of Hydrogen Energy 36 7 2011 4400 4408
    • (2011) International Journal of Hydrogen Energy , vol.36 , Issue.7 , pp. 4400-4408
    • Peksen, M.1    Ro, P.2    Blum, L.3    Stolten, D.4
  • 10
    • 34848844678 scopus 로고    scopus 로고
    • Advanced measurement techniques to characterize thermo-mechanical aspects of solid oxide fuel cells
    • DOI 10.1016/j.jpowsour.2007.07.072, PII S0378775307015455
    • J. Malzbender, and R.W. Steinbrech Advanced measurement techniques to characterize thermo-mechanical aspects of solid oxide fuel cells Journal of Power Sources 173 2007 60 67 (Pubitemid 47498875)
    • (2007) Journal of Power Sources , vol.173 , Issue.1 , pp. 60-67
    • Malzbender, J.1    Steinbrech, R.W.2
  • 11
    • 74249098019 scopus 로고    scopus 로고
    • Modeling of thermal stresses an life time prediction of planar solid oxide fuel cell under thermal cycling condition
    • L. Liu, G.Y. Kim, and A. Chandra Modeling of thermal stresses an life time prediction of planar solid oxide fuel cell under thermal cycling condition Journal of Power Sources 195 2010 2310 2318
    • (2010) Journal of Power Sources , vol.195 , pp. 2310-2318
    • Liu, L.1    Kim, G.Y.2    Chandra, A.3
  • 12
    • 0019625690 scopus 로고
    • Analysis of thermal fatigue behaviour of brittle structural materials
    • J.P. Singh, K. Nihara, and D.P.H. Hasselman Analysis of thermal fatigue behaviour of brittle structural materials Journal of Materials Science 16 1981 2789 2797 (Pubitemid 12509701)
    • (1981) Journal of Materials Science , vol.16 , Issue.10 , pp. 2789-2797
    • Singh, J.P.1    Niihara, K.2    Hasselman, D.P.H.3
  • 13
    • 79958819380 scopus 로고    scopus 로고
    • Investigation of solid oxide fuel cell sealing behavior under stack relevant conditions at Forschungszentrum Jülich
    • 10.1016/j.jpowsour.2010.09
    • S. Blum Groß, J. Malzbender, U. Pabst, M. Peksen, and R.o. Peters Investigation of solid oxide fuel cell sealing behavior under stack relevant conditions at Forschungszentrum Jülich Journal of Power Sources 2010 10.1016/j.jpowsour.2010.09
    • (2010) Journal of Power Sources
    • Blum Groß, S.1    Malzbender, J.2    Pabst, U.3    Peksen, M.4    R, O.P.5
  • 14
    • 23944452820 scopus 로고    scopus 로고
    • Sealants for solid oxide fuel cells, review
    • J.W. Fergus Sealants for solid oxide fuel cells, review Journal of Power Sources 147 2010 46 57
    • (2010) Journal of Power Sources , vol.147 , pp. 46-57
    • Fergus, J.W.1
  • 15
    • 77954764433 scopus 로고    scopus 로고
    • Seal glass for solid oxide fuel cells, review
    • M.K. Mahapatra, and K. Lu Seal glass for solid oxide fuel cells, review Journal of Power Sources 195 2010 7129 7139
    • (2010) Journal of Power Sources , vol.195 , pp. 7129-7139
    • Mahapatra, M.K.1    Lu, K.2
  • 16
    • 66849104379 scopus 로고    scopus 로고
    • Simulation of thermal stresses in anode-supported solid oxide fuel cell stacks. Part I: Probability of failure of the cells
    • A. Nakajo, Z. Wuillemin, J. Van herle, and D. Favrat Simulation of thermal stresses in anode-supported solid oxide fuel cell stacks. Part I: probability of failure of the cells Journal of Power Sources 193 1 2009 203 215
    • (2009) Journal of Power Sources , vol.193 , Issue.1 , pp. 203-215
    • Nakajo, A.1    Wuillemin, Z.2    Van Herle, J.3    Favrat, D.4
  • 17
    • 66849093809 scopus 로고    scopus 로고
    • Simulation of thermal stresses in anode-supported solid oxide fuel cell stacks. Part II: Loss of gas-tightness, electrical contact and thermal buckling
    • A. Nakajo, Z. Wuillemin, J. Van herle, and D. Favrat Simulation of thermal stresses in anode-supported solid oxide fuel cell stacks. Part II: loss of gas-tightness, electrical contact and thermal buckling Journal of Power Sources 193 1 2009 216 226
    • (2009) Journal of Power Sources , vol.193 , Issue.1 , pp. 216-226
    • Nakajo, A.1    Wuillemin, Z.2    Van Herle, J.3    Favrat, D.4
  • 18
    • 0347221150 scopus 로고
    • Measurement of the thermal-expansion coefficient of nickel from 300 to 1000 K and determination of the power-law constants near the Curie temperature
    • T.G. Kollie Measurement of the thermal-expansion coefficient of nickel from 300 to 1000 K and determination of the power-law constants near the Curie temperature Physical Review B 16 11 1977 4872 4881
    • (1977) Physical Review B , vol.16 , Issue.11 , pp. 4872-4881
    • Kollie, T.G.1
  • 19
    • 35548999331 scopus 로고    scopus 로고
    • Young's modulus of some SOFCs materials as a function of temperature
    • DOI 10.1016/j.jeurceramsoc.2007.05.009, PII S0955221907003780
    • S. Giraud, and J. Canel Young's modulus of some SOFCs materials as a function of temperature Journal of the European Ceramic Society 28 2008 77 83 (Pubitemid 350017303)
    • (2008) Journal of the European Ceramic Society , vol.28 , Issue.1 , pp. 77-83
    • Giraud, S.1    Canel, J.2
  • 20
    • 64449085965 scopus 로고    scopus 로고
    • Mechanical properties of NiO/Ni-YSZ composites depending on temperature, porosity and redox cycling
    • M. Pihlatie, A. Kaiser, and M. Mogensen Mechanical properties of NiO/Ni-YSZ composites depending on temperature, porosity and redox cycling Journal of the European Ceramic Society 29 2009 1657 1664
    • (2009) Journal of the European Ceramic Society , vol.29 , pp. 1657-1664
    • Pihlatie, M.1    Kaiser, A.2    Mogensen, M.3
  • 21
    • 33748090948 scopus 로고    scopus 로고
    • Modeling solid oxide fuel cell operation: Approaches, techniques and results
    • DOI 10.1016/j.jpowsour.2005.11.045, PII S0378775305015971
    • R. Bove, and S. Ubertini Modeling solid oxide fuel cell operation: approaches, techniques and results Journal of Power Sources 159 1 2006 543 559 (Pubitemid 44301586)
    • (2006) Journal of Power Sources , vol.159 , Issue.1 SPEC. ISS. , pp. 543-559
    • Bove, R.1    Ubertini, S.2
  • 22
    • 34247595839 scopus 로고    scopus 로고
    • A review of numerical modeling of solid oxide fuel cells
    • DOI 10.1016/j.ijhydene.2006.11.028, PII S0360319906005726, Fuel Cells
    • S. Kakac, A. Pramuanjaroenkij, and X. Zhou A review of numerical modeling of solid oxide fuel cells International Journal of Hydrogen Energy 32 7 2007 761 786 (Pubitemid 46670611)
    • (2007) International Journal of Hydrogen Energy , vol.32 , Issue.7 , pp. 761-786
    • Kakac, S.1    Pramuanjaroenkij, A.2    Zhou, X.Y.3
  • 24
    • 79751531744 scopus 로고    scopus 로고
    • Computational design and optimization of fuel cells and fuel cell systems
    • 10.1016/j.jpowsour.2010.12.011
    • M. Secanell, J. Wishart, and P. Dobson Computational design and optimization of fuel cells and fuel cell systems A Review, Journal of Power Sources 2010 10.1016/j.jpowsour.2010.12.011
    • (2010) A Review, Journal of Power Sources
    • Secanell, M.1    Wishart, J.2    Dobson, P.3
  • 25
    • 67650747274 scopus 로고    scopus 로고
    • Numerical modelling and experimental validation of a planar type pre-reformer in SOFC technology
    • M. Peksen, Peters Ro, L. Blum, and D. Stolten Numerical modelling and experimental validation of a planar type pre-reformer in SOFC technology International Journal of Hydrogen Energy 34 2009 6425 6436
    • (2009) International Journal of Hydrogen Energy , vol.34 , pp. 6425-6436
    • Peksen, M.1    Ro, P.2    Blum, L.3    Stolten, D.4
  • 26
    • 79955686095 scopus 로고    scopus 로고
    • 3D coupled CFD/FEM modelling and experimental validation of a planar type air pre-heater used in SOFC technology
    • 10.1016/ j.ijhydene.2011.02.068
    • M. Peksen, Ro. Peters, L. Blum, and D. Stolten 3D coupled CFD/FEM modelling and experimental validation of a planar type air pre-heater used in SOFC technology International Journal of Hydrogen Energy 2011 10.1016/ j.ijhydene.2011.02.068
    • (2011) International Journal of Hydrogen Energy
    • Peksen, M.1    Peters, Ro.2    Blum, L.3    Stolten, D.4
  • 27
    • 77649094937 scopus 로고    scopus 로고
    • Design and optimisation of SOFC system components using a Trio approach: Measurements, design of Experiments, and 3D computational fluid dynamics
    • M. Peksen, Peters Ro, L. Blum, and D. Stolten Design and optimisation of SOFC system components using a Trio approach: measurements, design of Experiments, and 3D computational fluid dynamics Journal of the Electrochemical Society (ECS) SOFC-XI 25 2 2009 1195 1200
    • (2009) Journal of the Electrochemical Society (ECS) SOFC-XI , vol.25 , Issue.2 , pp. 1195-1200
    • Peksen, M.1    Ro, P.2    Blum, L.3    Stolten, D.4
  • 29
    • 77954842759 scopus 로고    scopus 로고
    • Potential suitability of ferritic and austenitic steels as interconnect materials for solid oxide fuel cells operating at 600 °c
    • L. Niewolak, E. Wessel, L. Singheiser, and W.J. Quadakkers Potential suitability of ferritic and austenitic steels as interconnect materials for solid oxide fuel cells operating at 600 °C Journal of Power Sources 195 22 15, 2010 7600 7608
    • (2010) Journal of Power Sources , vol.195 , Issue.22 , pp. 7600-7608
    • Niewolak, L.1    Wessel, E.2    Singheiser, L.3    Quadakkers, W.J.4
  • 31
    • 79952532973 scopus 로고    scopus 로고
    • Trends in supercomputing: The European path to exascale
    • 10.1016/j.cpc.2010.11.011
    • N. Attig, P. Gibbon, and T. Lippert Trends in supercomputing: The European path to exascale Computer Physics Communications 2010 10.1016/j.cpc.2010.11.011
    • (2010) Computer Physics Communications
    • Attig, N.1    Gibbon, P.2    Lippert, T.3
  • 32
    • 61649115917 scopus 로고    scopus 로고
    • Computational physics with PetaFlops computers
    • N. Attig Computational physics with PetaFlops computers Computer Physics Communications 180 2009 555 558
    • (2009) Computer Physics Communications , vol.180 , pp. 555-558
    • Attig, N.1
  • 34
    • 80052371471 scopus 로고    scopus 로고
    • Computational modelling and experimental validation of the thermal fusion bonding process in porous fibrous media
    • Part E: J. Process Mechanical Engineering 10.1177/0954408910396785
    • M. Peksen, M. Acar, and W. Malalasekera Computational modelling and experimental validation of the thermal fusion bonding process in porous fibrous media Proc. IMechE Part E: J. Process Mechanical Engineering vol. 225 2011 10.1177/0954408910396785
    • (2011) Proc. IMechE , vol.225
    • Peksen, M.1    Acar, M.2    Malalasekera, W.3


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.