A novel yield locus description by combining the Taylor and the relaxed Taylor theory for sheet steels

International Journal of Plasticity

Volumn 27, Issue 11, 2011, Pages 1758-1780

  An, Yuguo ^a   Vegter, Henk ^a   Carless, Louisa ^a   Lambriks, Marc ^a  

^a SWINDEN TECHNOLOGY CENTRE   (Netherlands)

Author keywords

Anisotropic materials; Constitutive modelling; Crystal plasticity; Mechanical testing; Yield locus

Indexed keywords

ANISOTROPIC MATERIAL; BIAXIAL STRETCHING; COMBINED MODEL; CONSTITUTIVE MODELLING; CONSTRAINT MODEL; CRYSTAL PLASTICITY; FORMING LIMIT DIAGRAMS; INPUT DATAS; LARGE DEVIATIONS; MATERIAL PARAMETER; MECHANICAL TESTS; NEW MODEL; PLANE STRAIN TENSION; PLASTIC ANISOTROPY; POLYCRYSTAL PLASTICITY; R VALUE; SHEAR TESTS; SHEET FORMING; SHEET STEEL; STEEL GRADES; STRAIN RATIOS; STRESS AND STRAIN; STRETCHING DIRECTION; STRONG ANISOTROPIC MATERIALS; SYSTEMATIC STUDY; TAYLOR MODELS; TAYLOR THEORY; UNIAXIAL TENSILE TEST; VIRTUAL EXPERIMENTS; YIELD FUNCTION; YIELD LOCI;

CONSTITUTIVE EQUATIONS; EXPERIMENTS; MATERIALS; MATERIALS TESTING; METAL FORMING; OPTICAL ANISOTROPY; PLASTICITY; PLASTICITY TESTING; TENSILE TESTING; TESTING; VIRTUAL REALITY;

STEEL SHEET;

EID: 80052026538     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2011.05.003     Document Type: Article

References (62)

1. An, Y.G., Vegter, H., 1998. The difference in plastic behaviour between bulging test and through thickness compression test for sheet steels and aluminium alloys. In: IDDRG Working Group Meeting, Genval, Belgium.
2. Y.G. An, H. Vegter, L. Elliott, and J. Bottema A comparison of yield loci derived from different approaches for aluminium alloys Aluminium 80 2004 674 679
3. Y.G. An, H. Vegter, and L. Elliott A novel and simple method for the measurement of plane strain work hardening Journal of Materials Processing Technology 155-156 2004 1616 1622
4. Y.G. An, and H. Vegter Analytical and experimental study of frictional behaviour in through-thickness compression test Journal of Material Processing Technology 160 2005 148 155 (Pubitemid 40245640)
5. An, Y.G., Atzema, E., Workel, M., Vegter, H., Elliott, L., Moerman, J., 2005. A comparison of yield loci measured with mechanical tests and calculated from crystal plasticity for steel sheets. In: 1st International Conference on Super-high Strength Steels, Rome, Italy.
6. Y.G. An, H. Vegter, and J. Heijne Development of simple shear test for the measurement of work hardening Journal of Materials Processing Technology 209 2009 4248 4254
7. W.A. Backofen Deformation Process 1972 Addison-Wesley Publishing Company
8. D. Banabic, T. Kuwabara, T. Balan, D.S. Comsa, and D. Julean Nonquadratic yield criterion for orthotropic sheet metals under plane-stress conditions International Journal of Mechanical Sciences 45 2003 797 811
9. D. Banabic, H. Aretz, D.S. Comsa, and L. Paraianu An improved analytical description of orthotropy in metallic sheets International Journal of Plasticity 21 2005 493 512
10. F. Barlat, and J. Lian Plastic behaviour and stretchability of sheet metals. Part I: a yield function for orthotropic sheets under plane stress conditions International Journal of Plasticity 5 1989 51 66
11. F. Barlat, D.J. Lege, and J.C. Brem A six-component yield function for anisotropic materials International Journal of Plasticity 7 1991 693 712
12. F. Barlat, R.C. Becker, Y. Hayashida, Y. Maeda, M. Yanagawa, K. Chung, J.C. Brem, D.J. Lege, K. Matsui, S.J. Murtha, and S. Hattori Yielding description for solution strengthened aluminium alloys International Journal of Plasticity 13 1997 385 401 (Pubitemid 127431307)
13. F. Barlat, J.C. Brem, J.W. Yoon, K. Chung, R.E. Dick, D.J. Lege, F. Pourboghrat, S.H. Choi, and E. Chu Plane stress yield function for aluminium alloy sheets - Part I: Theory International Journal of Plasticity 19 2003 1297 1319
14. F. Barlat, J.W. Yoon, and O. Cazacu On linear transformations of stress tensors for the description of plastic anisotropy International Journal of Plasticity 23 2007 876 896 (Pubitemid 46187317)
15. P.S. Bate, and Y.G. An Plastic anisotropy in AA5005 Al-1Mg: predictions using crystal plasticity finite element analysis Scripta Materialia 51 2004 973 977
16. Y. Bergström A dislocation model for the stress-strain behaviour of polycrystalline Fe with special emphasis on the variation of the densities of mobile and immobile dislocations Materials Science and Engineering 5 1969 179 192
17. J.F.W. Bishop, and R. Hill A theory of the plastic distortion of a polycrystalline aggregate under combined stresses Philosophical Magazine 42 1951 414 427
18. J.F.W. Bishop, and R. Hill A theoretical derivation of the plastic properties of a face-centred metal Philosophical Magazine 42 1951 1298 1307
19. H.J. Bunge Some applications of the Taylor theory of polycrystal plasticity Kristall und Technik-Crystal Research and Technology 5 1970 145 175
20. O. Engler, and Y.G. An Correlation of texture and plastic anisotropy in the Al-Mg alloy Solid State Phenomena 105 2005 277 283
21. F. Grytten, B. Holmedal, O.S. Hopperstad, and T. Borvik Evaluation of identification methods for YLD2004-18p International Journal of Plasticity 24 2008 2248 2277
22. C.J. Hamelin, B.J. Diak, and A.K. Pilkey Multiscale modelling of the induced plastic anisotropy in bcc metals International Journal of Plasticity 27 2011 1185 1202
23. Hill, R., 1948. A theory of the yielding and plastic flow of anisotropic metals. Proceedings of the Royal Society London A 193, 281-297.
24. B. Holmedal, P. Van Houtte, and Y.G. An A crystal plasticity model for strain-path changes in metals International Journal of Plasticity 24 2008 1360 1379 (Pubitemid 351645164)
25. W.F. Hosford A generalized isotropic yield criterion Journal of Applied Mechanics Transactions of the ASME 39 1972 607 609
26. Hosford, W.F., 1979. On yield loci of anisotropic cubic metals. In: Proceedings of the Seventh North American Metalworking Conference, Dearborn, pp. 191-197.
27. ISO12004-2, 2008. Metallic materials - Sheet and strip - Determination of forming-limit curves, Part 2: Determination of forming-limit curves in the laboratory.
28. S.R. Kalidindi, and S.E. Schoenfeld On the prediction of yield surfaces by the crystal plasticity models for fcc polycrystals Materials Science and Engineering A 293 2000 120 129
29. Keeler, S.P., 1961. Plastic instability and fracture in sheets stretched over rigid punches. Ph.D. Thesis, Massachusetts Institute of Technology, Cambridge, MA.
30. A. Krabiell, and W. Dahl Zum Einfluss von Temperatur und Dehngeschwindigkeit auf die Streckgrenze von Baustahlen unterschiedlicher Festigkeit Archiv fur das Eisenhuttenwesen 52 1981 429 436 (Pubitemid 12472459)
31. M. Kraska, M. Doig, D. Tikhomirov, D. Raabe, and F. Roters Virtual material testing for stamping simulations based on polycrystal plasticity Computational Materials Science 46 2009 383 392
32. M.A. Kumar, S. Mahesh, and V. Parameswaran A 'stack' model of rate-independent polycrystals International Journal of Plasticity 27 2011 962 981
33. T. Kuwabara, S. Ikeda, and T. Kuroda Measurement and analysis of differential work hardening in cold rolled steel sheet under biaxial tension Journal of Material Processing Technology 1998 517 523 (Pubitemid 128639055)
34. T. Kuwabara, A. Van Bael, and E. Iizuka Measurement and analysis of yield locus and work hardening characteristics of steel sheets with different R-values Acta Materialia 50 2002 3717 3729 (Pubitemid 34813969)
35. R.A. Lebensohn, and C.N. Tomé A self-consistent approach for the simulation of plastic deformation and texture development of polycrystals: application to Zr alloys Acta Metallurgica et Materialia 41 1993 2611 2624
36. J. Lian, F. Barlat, and B. Baudelet Plastic behaviour and stretchability of sheet metals. Part II: Effect of yield surface shape on sheet forming limit International Journal of Plasticity 5 1989 131 147
37. R.W. Logan, and W.F. Hosford Upper-bound anisotropic yield locus calculations assuming pencil glide International Journal of Mechanical Sciences 22 1980 419 430
38. S. Mahesh, C.N. Tomé, R.J. McCabe, G.C. Kaschner, I.J. Beyerlein, and A. Misra Application of a substructure-based hardening model to copper under loading path changes Metallurgical and Materials Transactions A 35A 12 2004 3763 3774 (Pubitemid 40108158)
39. S. Mahesh A hierarchical model for rate-dependent polycrystals International Journal of Plasticity 25 2009 752 767
40. Z. Marciniak, and K. Kuczynski Limit strains in the processes of stretch-forming sheet metal International Journal of Mechanical Sciences 9 1967 609 620
41. S. M'Guil, S. Ahzi, F. Barlat, and J.J. Gracio Microstructural effects on yield surface evolution in cubic metals using the viscoplastic φ - model International Journal of Plasticity 27 2011 102 120
42. A. Molinari, G.R. Canova, and S. Ahzi A self-consistent approach of the large deformation polycrystal viscoplasticity Acta Metallurgica 35 1987 2983 2994 (Pubitemid 18547483)
43. W. Muller, and K.J. Pohlandt New experiments for determining yield loci of sheet metal Material and Processing Technology 60 1996 643 648 (Pubitemid 126383349)
44. Numisheet 2008. In: Hora et al. (Ed.), Benchmark 1 - Virtual Forming Limit Curves. Interlaken, Switzerland.
45. Paraianu, L., Comsa, D.S., Cosovici, G., Jurco, P., Banabic, D., 2003. An improvement of the BBC2000 yield criterion. In: Proceedings of the ESAFORM 2003 Conference.
46. B. Peeters, M. Seefeldt, C. Teodosiu, S.R. Kalidindi, P. Van Houtte, and E. Aernoudt Work-hardening/softening behaviour of b.c.c. polycrystals during changing strain paths: I. An integrated model based on substructure and texture evolution, and its prediction of the stress-strain behaviour of an IF steel during two-stage strain paths Acta Materialia 49 2001 1607 1619 (Pubitemid 32409186)
47. B. Peeters, B. Bacroix, C. Teodosiu, P. Van Houtte, and E. Aernoudt Work-hardening/softening behaviour of b.c.c. polycrystals during changing strain: Part II TEM observations of dislocation sheets in an IF steel during two-stage strain paths and their representation in terms of dislocation densities Acta Materialia 49 2001 1621 1632 (Pubitemid 32415954)
48. M.J. Serenelli, M.A. Bertinetti, and J.W. Signorelli Investigation of the dislocation slip assumption on formability of BCC sheet metals International Journal of Mechanical Sciences 52 2010 1723 1734
49. J.W. Signorelli, M.A. Bertinetti, and P.A. Turner Predictions of forming limit diagrams using a rate-dependent polycrystal self-consistent plasticity model International Journal of Plasticity 25 2009 1 25
50. G.I. Taylor Plastic strain in metals Journal of Institution of Metals 62 1938 307 324
51. D.D. Tjahjanto, P. Eisenlohr, and F. Roters A novel grain cluster-based homogenisation scheme Modelling and Simulation in Materials Science and Engineering 18 2010 015006
52. P. Van Houtte Calculation of the yield locus of texture polycrystals using the Taylor and the relaxed Taylor theory Texture and Microstructures 7 1987 29 72
53. P. Van Houtte A comprehensive mathematical formulation of an extended Taylor-Bishop-Hill model featuring relaxed constraints the Renouard-Wintenberger theory and a strain rate sensitivity model Texture and Microstructure 8-9 1988 313 350
54. P. Van Houtte, K. Mols, A. Van Bael, and E. Aernoudt Application of yield loci calculated from texture data Texture and Microstructure 11 1989 23 39
55. P. Van Houtte, and A. Van Bael Convex plastic potentials of 4th and 6th rank for anisotropic materials International Journal of Plasticity 20 2004 1505 1524
56. P. Van Houtte, S.K. Yerra, and A. Van Bael The facet method; a hierarchic al multilevel modelling scheme for anisotropic convex plastic potentials International Journal of Plasticity 25 2009 332 360
57. Van Houtte, P., 1995. The "MTM-FHM'' software system Version 2. Department of Metallurgy and Materials Engineering, Katholieke Universiteit Leuven, Belgium.
58. P. Van Liempt Workhardening and substructural geometry of metals Journal of Materials Processing Technology 45 1994 459 464
59. Vegter, H., 1991. On the plastic behaviour of steel during sheet forming. Ph.D thesis, University of Twente.
60. Vegter, H., An, Y.G., Pijlman, H., Huétink, J., 1999. Advanced mechanical testing on aluminium alloys and low carbon steels for sheet forming. In: Gelin, J.C., Picart, P. (Eds.), Proceedings NUMISHEET 99, pp. 3-8.
61. H. Vegter, and A.H. van den Boogaard A plane stress yield function for anisotropic sheet material by interpolation of biaxial stress states International Journal of Plasticity 22 2006 557 580 (Pubitemid 41457618)
62. R. von Mises Mechanik der plastischen Formanderung von Kristallen Zeitschrift fur Angewandte Mathematik und Mechanik 8 1928 161 185