Multiscale modelling of the induced plastic anisotropy in bcc metals

International Journal of Plasticity

Volumn 27, Issue 8, 2011, Pages 1185-1202

  Hamelin, C J ^a,b   Diak, B J ^a   Pilkey, A K ^a  

^a QUEEN S UNIVERSITY   (Canada)

^b AUSTRALIAN NUCLEAR SCIENCE AND TECHNOLOGY ORGANISATION   (Australia)

Author keywords

Crystal plasticity; Crystallographic texture; Finite element; Plastic anisotropy

Indexed keywords

BCC METALS; BODY-CENTERED CUBIC; CRYSTAL PLASTICITY; CRYSTALLOGRAPHIC ORIENTATIONS; CRYSTALLOGRAPHIC TEXTURE; CRYSTALLOGRAPHIC TEXTURES; EXPLICIT DYNAMICS; FINITE ELEMENT; GRAIN ROTATION; LS-DYNA; MATERIAL HETEROGENEITY; MESOSCOPICS; MULTI-SCALE MODELLING; MULTISCALE MODELS; OPTIMAL RESULTS; PLASTIC ANISOTROPY; SLIP SYSTEM; SURFACE-ROUGHENING; WORK HARDENING;

ANISOTROPY; CRYSTALLOGRAPHY; DEFORMATION; DISLOCATIONS (CRYSTALS); ENGINEERING RESEARCH; FINITE ELEMENT METHOD; PLASTICITY; STRAIN HARDENING; TEXTURES;

SINGLE CRYSTALS;

EID: 79956136794     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2011.01.003     Document Type: Article

References (46)

1. Y. Aoyagi, and K. Shizawa Multiscale crystal plasticity modeling based on geometrically necessary crystal defects and simulation on fine-graining for polycrystal International Journal of Plasticity 23 6 2007 1022 1040 (Pubitemid 46366624)
2. A. Arsenlis, D.M. Parks, R. Becker, and V.V. Bulatov On the evolution of crystallographic dislocation density in non-homogeneously deforming crystals Journal of the Mechanics and Physics of Solids 52 6 2004 1213 1246
3. R.J. Asaro, and A. Needleman Texture development and strain hardening in rate dependent polycrystals Acta Metallurgica 33 6 1985 923 953 (Pubitemid 15565280)
4. F. Barlat, M.V. Glazov, J.C. Brem, and D.J. Lege A simple model for dislocation behavior, strain and strain rate hardening evolution in deforming aluminum alloys International Journal of Plasticity 18 2002 919 939 (Pubitemid 34524278)
5. A.J. Beaudoin, P.R. Dawson, K.K. Mathur, and U.F. Kocks A hybrid finite-element formulation for polycrystal plasticity with consideration of macrostructural and microstructural linking International Journal of Plasticity 11 5 1995 501 521
6. R. Becker Effects of strain localization on surface roughening during sheet forming Acta Materialia 46 4 1998 1385 1401 (Pubitemid 128387891)
7. T.E. Buchheit, G.W. Wellman, and C.B. Corbett Investigating the limits of polycrystal plasticity modeling International Journal of Plasticity 21 2005 221 249
8. H.-J. Bunge Texture Analysis in Materials Science 1982 Butterworth & Co. London
9. E.A. Calnan, and C.J.B. Clews Deformation textures in face-centered cubic metals Philosophical Magazine 41 322 1950 1085 1100
10. H.-C. Chao The mechanism of ridging in ferritic stainless steel Transactions of the ASM 60 1967 37 50
11. G.Y. Chin, and W.L. Mammel Computer solutions of the Taylor analysis for axisymmetric flow Transactions of the Metallurgical Society of AIME 239 1967 1400 1405
12. W.A. Curtin, and R.E. Miller Atomistic/continuum coupling in computational materials science Modelling and Simulation in Materials Science and Engineering 11 2003 R33 R68
13. P.R. Dawson, S. MacEwan, and P.-D. Wu Advances in sheet metal forming analyses: dealing with mechanical anisotropy from crystallographic texture International Materials Reviews 48 2 2003 86 122
14. P.S. Follansbee, and U.F. Kocks A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable Acta Metallurgica 36 1 1988 81 93 (Pubitemid 18626871)
15. J.M. Gerken, and P.R. Dawson A finite element formulation to solve a non-local constitutive model with stresses and strains due to slip gradients Computer Methods in Applied Mechanics and Engineering 197 13-16 2008 1343 1361
16. J. Gil Sevillano Flow stress and work hardening R.W. Cahn, Materials Science and Technology, A Comprehensive Treatment 1993 VCH Weinheim 19 88 (Chapter 2)
17. B. Holmedal, P. Van Houtte, and Y. An A crystal plasticity model for strain-path changes in metals International Journal of Plasticity 24 2008 1360 1379 (Pubitemid 351645164)
18. R.W.K. Honeycombe The Plastic Deformation of Metals 2nd ed. 1984 Edward Arnold Publishers Ltd. London
19. U.F. Kocks Laws for work-hardening and low-temperature creep Transactions of the ASME, H 98 1 1976 76 85
20. M. Kraska, M. Doig, D. Tikhomirov, D. Raabe, and F. Roters Virtual material testing for stamping simulations based on polycrystal plasticity Computational Materials Science 46 2009 374 389
21. D. Kuhlmann-Wilsdorf A new theory of work hardening Transactions of the Metallurgical Society of AIME 224 1962 1047 1061
22. W.F. Lankford, S.C. Snider, and J.A. Bausch New criteria for predicting the press performance of deep drawing steels Transactions of the American Society of Metals 42 1950 1197 1232
23. S. Mahesh, C.N. Tomé, R.J. McCabe, G.C. Kaschner, I.J. Beyerlein, and A. Misra Application of a substructure-based hardening model to copper under loading path changes Metallurgical and Materials Transactions A 35A 12 2004 3763 3774 (Pubitemid 40108158)
24. R.D. McGuinty, and D.L. McDowell Multiscale polycrystal plasticity Journal of Materials and Technology - Transactions of the ASME 121 2 1999 203 209
25. K.W. Neale, K. Inal, and P.D. Wu Effects of temperature gradients and strain paths on localization phenomena in polycrystals International Journal of Mechanical Sciences 45 10 2003 1671 1686
26. E. Nes Modelling of work hardening and stress saturation in fcc metals Progress in Materials Science 41 1998 129 193 (Pubitemid 127437870)
27. Peeters, B., 2002. Multiscale modelling of the induced plastic anisotropy in IF steel during sheet forming. Ph.D. Thesis, Katholieke Universiteit Leuven, Leuven.
28. B. Peeters, M. Seefeldt, C. Teodosiu, S.R. Kalidindi, P. Van Houtte, and E. Aernoudt Work hardening-softening behaviour of bcc polycrystals during changing strain paths: I. An integrated model based on substructure and texture evolution, and its prediction of the stress-strain behaviour of an IF steel during two-stage strain paths Acta Materialia 49 2001 1607 1619 (Pubitemid 32409186)
29. B. Peeters, M. Seefeldt, P. Van Houtte, and E. Aernoudt Taylor ambiguity in BCC polycrystals: a non-problem if substructural anisotropy is considered Scripta Materialia 45 2001 1349 1356 (Pubitemid 33107246)
30. D. Raabe Investigation of contribution of {1 2 3} slip planes to development of rolling textures in bcc metals by use of Taylor models Materials Science and Technology 11 5 1995 455 460
31. D. Raabe Simulation of rolling textures of bcc metals considering grain interactions and crystallographic slip on {1 1 0}, {1 1 2}, and {1 2 3} planes Materials Science and Engineering A 197 1 1995 31 37
32. D. Raabe, M. Sachtleber, H. Weiland, G. Scheele, and Z. Zhao Grain-scale micromechanics of polycrystal surfaces during plastic straining Acta Materialia 51 6 2003 1539 1560
33. D. Raabe, Y. Wang, and F. Roters Crystal plasticity simulation study on the influence of texture on earing in steel Computational Materials Science 34 2005 221 234 (Pubitemid 40963152)
34. C.N. Reid Deformation Geometry for Materials Scientists 1973 Pergamon Press New York
35. M. Renouard, and M. Wintenberger C.R. Hebd. Seances Acad. B292 1981 385 388
36. F. Roters, P. Eisenlohr, L. Hantcherli, D.D. Tjahjanto, T.R. Bieler, and D. Raabe Overview of the constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: theory, experiments, applications Acta Materialia 58 2010 1152 1211
37. S. Saimoto, and P. Van Houtte Constitutive relation based on Taylor slip analysis to replicate work-hardening evolution Acta Materialia 59 2 2011 602 612
38. H. Takechi, H. Kato, T. Sunami, and T. Nakayama The mechanism of ridging in 17%-chromium stainless steel sheets Materials Transactions-JIM 8 1967 233 239
39. G.I. Taylor Plastic strain in metals The Journal of the Institute of Metals, (seventh ed.) 62 1938 307 324
40. P. Van Houtte A comprehensive mathematical formulation of an extended Taylor-Bishop-Hill model, featuring relaxed constraints, the Renouard-Wintenberger theory and a strain rate sensitivity model Textures and Microstructures 8 & 9 1988 315 350
41. R.N. Wright Anisotropic plastic flow in ferritic stainless steels and the "roping" phenomenon Metallurgical Transactions 3 1972 83 91
42. K. Yamaguchi, N. Takakura, and S. Imatani Increase of forming limit of sheet metals by removal of surface roughening with plastic strain (balanced biaxial stretching of aluminum sheets and foils) Journal of Materials Processing Technology 48 1995 27 34
43. H.M. Zbib, T.D. de la Rubia, and V. Bulatov A multiscale model of plasticity based on discrete dislocation dynamics Journal of Engineering Materials and Technology - Transactions of the ASME 124 1 2002 78 87 (Pubitemid 40000423)
44. Z. Zhao, W. Mao, F. Roters, and D. Raabe A texture optimization study for minimum earing in aluminium by use of a texture component crystal plasticity finite element method Acta Materialia 52 2004 1003 1012
45. O.C. Zienkiewicz The Finite Element Method in Structural and Continuum Mechanics 1967 McGraw-Hill New York
46. A. Zisman, E. Nesterova, V. Rybin, and C. Teodosiu Interfacial misorientations and underlying slip activity of a shear microband in mild steel: TEM analysis and numerical simulation Scripta Materialia 46 2002 729 733 (Pubitemid 34440672)