Generalized duty-ratio-based pulsewidth modulation technique for a three-to-k phase matrix converter

IEEE Transactions on Industrial Electronics

Volumn 58, Issue 9, 2011, Pages 3925-3937

  Ahmed, Sk Moin ^a   Iqbal, Atif ^b,c   Abu Rub, Haithem ^a  

^a TEXAS A AND M UNIVERSITY AT QATAR   (Qatar)

^b QATAR UNIVERSITY   (Qatar)

^c ALIGARH MUSLIM UNIVERSITY   (India)

Author keywords

AC AC power conversion; direct duty ratio; multiphase; pulsewidth modulation (PWM)

Indexed keywords

AC-AC POWER CONVERSION; DUTY RATIOS; EXPERIMENTAL APPROACHES; FIXED FREQUENCY; FIXED VOLTAGE; GENERAL TOPOLOGY; INPUT VOLTAGES; MATRIX CONVERTER; MULTIPHASE; OUTPUT VOLTAGES; PHASE MATRIX; PULSE WIDTH MODULATION CONTROL; VARIABLE FREQUENCIES; VARIABLE VOLTAGE;

ALGORITHMS; MATRIX ALGEBRA; MODULATION; PULSE WIDTH MODULATION; TOPOLOGY;

POWER CONVERTERS;

EID: 80051770641     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2010.2098373     Document Type: Article

References (53)

1. P. W. Wheeler, J. Rodriguez, J. C. Clare, L. Empringham, and A. Weinstein, "Matrix converters: A technology review", IEEE Trans. Ind. Electron., vol. 49, no. 2, pp. 276-288, Apr. 2002. (Pubitemid 34711830)
2. P. W. Wheeler, J. C. Clare, L. Empringham, M. Apap, and M. Bland, "Matrix converters", IEEE Power Eng. J., vol. 16, no. 6, pp. 273-282, Dec. 2002.
3. J. Clare and P. Wheeler, "New technology: Matrix converters", IEEE IES Newslett., vol. 52, no. 1, pp. 10-12, Mar. 2005.
4. L. Helle, K. B. Larsen, A. H. Jorgensen, S. Munk-Nielsen, and F. Blaabjerg, "Evaluation of modulation schemes for three-phase to three-phase matrix converters", IEEE Trans. Ind. Electron., vol. 51, no. 1, pp. 158-171, Feb. 2004.
5. M. Apap, J. C. Clare, P. W. Wheeler, and K. J. Bradley, "Analysis and comparison of ac-ac matrix converter control strategies", in Proc. IEEE Power Electron. Spec. Conf., 2003, vol. 3, pp. 1287-1292.
6. R. Pena, R. Cardenas, E. Reyes, J. Clare, and P. W. Wheeler, "A topology for multiple generation system with doubly fed induction machines and indirect matrix converter", IEEE Trans. Ind. Electron., vol. 56, no. 10, pp. 4181-4193, Oct. 2009.
7. R. Cardenas, R. Pena, G. Tobar, J. Clare, P. W. Wheeler, and G. M. Asher, "Stability analysis of a wind energy conversion system based on a doubly fed induction generator fed by a matrix converter", IEEE Trans. Ind. Electron., vol. 56, no. 10, pp. 4194-4206, Oct. 2009.
8. S. L. Arevalo, P. Zanchetta, P. W. Wheeler, A. Trentin, and L. Empringham, "Control and implementation of a matrix converter based ac ground power supply unit for aircraft servicing", IEEE Trans. Ind. Electron., vol. 57, no. 6, pp. 2076-2084, Jun. 2010.
9. P. Zanchetta, P. W. Wheeler, J. C. Clare, M. Bland, L. Empringham, and D. Katsis, "Control design of a three-phase matrix converter based ac-ac mobile utility power supply", IEEE Trans. Ind. Electron., vol. 55, no. 1, pp. 209-217, Jan. 2008.
10. K.-B. Lee and F. Blaabjerg, "Sensorless DTC-SVM for induction motor driven by a matrix converter using parameter estimation strategy", IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 512-521, Feb. 2008. (Pubitemid 351344224)
11. Q. Gao, G. M. Asher, M. Sumner, and L. Empringham, "Position estimation of a matrix converter fed ac PM machine from zero to high speed using PWM excitation", IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 2030-2038, Jun. 2009.
12. C. Ortega, A. Arias, C. Caruana, J. Balcells, and G. M. Asher, "Improved waveform quality in the direct torque control of matrix converter fed PMSM drives", IEEE Trans. Ind. Electron., vol. 57, no. 6, pp. 2101-2110, Jun. 2010.
13. P. W. Wheeler, J. C. Clare, M. Apap, and K. J. Bradley, "Harmonic loss due to operation of induction machines from matrix converters", IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 809-816, Feb. 2008. (Pubitemid 351344253)
14. M. P. Kazmierkowaski, R. Krishnan, and F. Blaabjerg, Control in Power Electronics-Selected Problems. New York: Academic, 2002.
15. H. A. Toliyat and S. Campbell, DSP Based Electromechanical Motion Control. Boca Raton, FL: CRC Press, 2004.
16. G. K. Singh, "Multi-phase induction machine drive research-A survey", Elect. Power Syst. Res., vol. 61, no. 2, pp. 139-147, Mar. 2002. (Pubitemid 34182345)
17. M. Jones and E. Levi, "A literature survey of state-of-the-art in multiphase ac drives", in Proc. 37th Int. UPEC, Stafford, U. K., 2002, pp. 505-510.
18. R. Bojoi, F. Farina, F. Profumo, and A. Tenconi, "Dual three induction machine drives control-A survey", Trans. Inst. Elect. Eng. Jpn. D, vol. 126, no. 4, pp. 420-429, 2006.
19. E. Levi, R. Bojoi, F. Profumo, H. A. Toliyat, and S. Williamson, "Multi-phase induction motor drives-A technology status review", IET Elect. Power Appl., vol. 1, no. 4, pp. 489-516, Jul. 2007. (Pubitemid 47545857)
20. E. Levi, "Guest editorial", IEEE Trans. Ind. Electron., vol. 55, no. 5, pp. 1891-1892, May 2008.
21. E. Levi, "Multi-phase machines for variable speed applications", IEEE Trans. Ind. Electron., vol. 55, no. 5, pp. 1893-1909, May 2008. (Pubitemid 351751817)
22. J. Holtz, "Pulse width modulation-A survey", IEEE Trans. Ind. Electron., vol. 39, no. 5, pp. 410-420, Oct. 1992.
23. D. G. Holmes and T. A. Lipo, Pulse Width Modulation for Power Converters: Principle and Practice. Piscataway, NJ: IEEE Press, 2003.
24. D. Dujic, M. Jones, and E. Levi, "Generalised space vector PWM for sinu-soidal output voltage generation with multiphase voltage source inverter", Int. J. Ind. Electron. Drives, vol. 1, no. 1, pp. 1-13, May 2009.
25. J. Szczepanik and T. Sienko, "A new concept of application of multiphase matrix converter in power systems", in Proc. EUROCON, Sep. 9-12, 2007, pp. 1535-1540.
26. J. Szczepanik and T. Sienko, "New control strategy for multiphase matrix converter", in Proc. Int. Conf. Syst. Eng., Las Vegas, NV, Aug. 19-21, 2008, pp. 121-126.
27. J. Szczepanik and T. Sienko, "Control scheme for a multiphase matrix converter", in Proc. EUROCON, Saint Petersburg, Russia, May 18-23, 2009, pp. 545-551.
28. X. Huang, K. Bradley, A. Goodman, and C. Whitley, "Fault-tolerance analysis of multi-phase single sided matrix converter for brushless dc drives", in Proc. IEEE ISIE, Vigo, Spain, Jun. 4-7, 2007, pp. 3168-3173.
29. A. Alesina and M. Venturini, "Solid state power conversion: A Fourier analysis approach to generalised transformer synthesis", IEEE Trans. Circuits Syst., vol. CAS-28, no. 4, pp. 319-330, Apr. 1981. (Pubitemid 11495898)
30. A. Alesina and M. Venturini, "Analysis and design of optimum amplitude nine-switch direct ac-ac converters", IEEE Trans. Power Electron., vol. 4, no. 1, pp. 101-112, Jan. 1989.
31. L. Huber and D. Borojevic, "Space vector modulator for forced commutated cycloconverters", in Conf. Rec. IEEE IAS Annu. Meeting, 1991, pp. 1032-1041.
32. L. Huber and D. Borojevic, "Space vector modulated three-phase to three-phase matrix converter with input power factor correction", IEEE Trans. Ind. Appl., vol. 31, no. 6, pp. 1234-1246, Nov./Dec. 1995.
33. J. Igney and M. Braun, "Space vector modulation strategy for conventional and indirect matrix converters", in Proc. EPE Conf., Dresden, Germany, 2005, [CD-ROM].
34. D. Casadei, G. Grandi, G. Serra, and A. Tani, "Space vector control of matrix converters with unity power factor and sinusoidal input/output waveforms", in Proc. EPE Conf., 1993, vol. 7, pp. 170-175.
35. D. Casadei, G. Serra, A. Tani, and L. Zarri, "Matrix converter modulation strategies: A new general approach based on space vector representation of the switch state", IEEE Trans. Ind. Electron., vol. 49, no. 2, pp. 370-381, Apr. 2002. (Pubitemid 34711840)
36. D. Casadei, G. Serra, A. Tani, and L. Zarri, "A space vector modulation strategy for matrix converters minimizing the rms value of the load current ripple", in Proc. IEEE IECON, Paris, France, Sep. 2006, pp. 2757-2762.
37. F. Bradaschia, M. C. Cavalcanti, F. A. S. Neves, and H. E. P. de Souza, "A modulation technique to reduce switching losses in matrix converters", IEEE Trans. Ind. Electron., vol. 56, no. 4, pp. 1186-1195, Apr. 2009.
38. P. Nielsen, F. Blaabjerg, and J. K. Pedersen, "Space vector modulated matrix converter with minimized number of switchings and a feed for-ward compensation of input voltage unbalance", in Proc. PEDES, 1996, pp. 833-839.
39. L. Helle and S. Munk-Nielsen, "A novel loss reduced modulation strategy for matrix converters", in Proc. IEEE Power Electron. Spec. Conf., 2001, pp. 1102-1107. (Pubitemid 32950375)
40. R. Vargas, U. Ammann, and J. Rodriguez, "Predictive approach to increase efficiency and reduce switching losses on matrix converters", IEEE Trans. Power Electron., vol. 24, no. 4, pp. 894-902, Apr. 2009.
41. R. Vargas, U. Ammann, B. Hudoffsky, J. Rodriguez, and P. Wheeler, "Predictive torque control of an induction machine fed by a matrix converter with reactive input power control", IEEE Trans. Power Electron., vol. 25, no. 6, pp. 1426-1438, Jun. 2010.
42. D. Casadei, G. Serra, A. Tani, and L. Zarri, "Optimal use of zero vectors for minimizing the output current distortion in matrix converters", IEEE Trans. Ind. Electron., vol. 56, no. 2, pp. 326-336, Feb. 2009.
43. P. Cortes, P. Kazmierkowski, R. M. Kennel, D. E. Quevedo, and J. Rodriguez, "Predictive control in power electronics and drives", IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4312-4321, Dec. 2008.
44. P. Correa, J. Rodriguez, M. Rivera, J. R. Espinoza, and J. W. Kolar, "Predictive control of an indirect matrix converter", IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 1847-1853, Jun. 2009.
45. R. Vargas, J. Rodriguez, U. Ammann, and P. W. Wheeler, "Predictive current control of an induction machine fed by a matrix converter with reactive power control", IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4362-4371, Dec. 2008.
46. R. Vargas, U. Ammann, J. Rodriguez, and J. Pontt, "Predictive strategy to control common-mode voltage in loads fed by matrix converters", IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4372-4380, Dec. 2008.
47. B. Wang and G. Venkataramanan, "A carrier-based PWM algorithm for indirect matrix converters", in Proc. IEEE-PESC, 2006, pp. 2780-2787.
48. Y.-D. Yoon and S.-K. Sul, "Carrier-based modulation technique for matrix converter", IEEE Trans. Power Electron., vol. 21, no. 6, pp. 1691-1703, Nov. 2006. (Pubitemid 44824215)
49. P. C. Loh, R. Rong, F. Blaabjerg, and P. Wang, "Digital carrier modulation and sampling issues of matrix converter", IEEE Trans. Power Electron., vol. 24, no. 7, pp. 1690-1700, Jul. 2009.
50. Y. Li and N.-S. Choi, "Carrier based pulse width modulation for matrix converter", in Proc. Appl. Power Electron. Conf. Expo., 2009, pp. 1709-1715.
51. Y. Li, N.-S. Choi, B.-M. Han, K. M. Kim, B. Lee, and J.-H. Park, "Direct duty ratio pulse width modulation method for matrix converter", Int. J. Control Autom. Syst., vol. 6, no. 5, pp. 660-669, Oct. 2008.
52. A. Iqbal, S. M. Ahmad, H. Abu-Rub, and M. R. Khan, "Carrier based PWM technique for a novel three-to-five phase matrix converter", presented at the Power Conversion Intelligent Motion (PCIM) Europe, Nuremberg, Germany, May 2-6, 2010, Paper 173.
53. A. Iqbal, E. Levi, M. Jones, and S. N. Vukosavic, "Generalised sinusoidal PWM with harmonic injection for multi-phase VSIs", in Proc. IEEE 37th PESC, Jeju, Korea, 2006, pp. 2871-2877.