Indirect four-leg matrix converter based on robust adaptive back-stepping control

IEEE Transactions on Industrial Electronics

Volumn 58, Issue 9, 2011, Pages 4288-4298

  Sun, Yao ^a   Su, Mei ^a   Li, Xing ^a   Wang, Hui ^a   Gui, Weihua ^a  

^a CENTRAL SOUTH UNIVERSITY   (China)

Author keywords

Adaptive back stepping; indirect four leg matrix converter; sliding mode control; unbalanced load; varying period carrier based modulation

Indexed keywords

ADAPTIVE SLIDING MODE; CARRIER-BASED MODULATION; CONTROL INPUTS; FOUR-LEG; INPUT CURRENT; INPUT FILTER; MATRIX CONVERTER; NONLINEAR LOAD; POWER GRIDS; ROBUST ADAPTIVE; SLIDING MODES; UNBALANCED LOADS;

EID: 80051749763     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2010.2098370     Document Type: Article

References (29)

1. M. Venturini, "A new sine wave in sine wave out conversion technique which eliminates reactive elements", in Proc. Powercon Conf., 1980, vol. 7, pp. E3/1-E3/15.
2. L. Huber and D. Borojevic, "Space vector modulated three-phase to three-phase matrix converter with input power factor correction", IEEE Trans. Ind. Appl., vol. 31, no. 6, pp. 1234-1246, Nov./Dec. 1995.
3. D. Casadei, G. Serra, A. Tani, and L. Zarri, "Matrix converter modulation strategies: A new general approach based on space-vector representation of the switch state", IEEE Trans. Ind. Electron., vol. 49, no. 2, pp. 370-381, Apr. 2002. (Pubitemid 34711840)
4. P. W. Wheeler, J. Rodríguez, J. C. Clare, L. Empringham, and A. Weinstein, "Matrix converters: A technology review", IEEE Trans. Ind. Electron., vol. 49, no. 2, pp. 276-288, Apr. 2002. (Pubitemid 34711830)
5. J. Mahlein, J. Igney, J. Weigold, M. Braun, and O. Simon, "Matrix converter commutation strategies with and without explicit input voltage sign measurement", IEEE Trans. Ind. Electron., vol. 49, no. 2, pp. 407-414, Apr. 2002. (Pubitemid 34711844)
6. L. Empringham, P. Wheeler, and J. Clare, "Intelligent commutation of matrix converter bi-directional switch cells using novel gate drive techniques", in Proc. IEEE Power Electron. Spec. Conf., 1998, vol. 1, pp. 707-713.
7. A. Shuster, "A matrix converter without reactive clamp elements for an induction motor drive system", in Proc. IEEE Power Electron. Spec. Conf., 1998, vol. 1, pp. 714-720.
8. C. Klumpner, I. Boldea, and F. Blaabjerg, "The matrix converter: Over-voltages caused by the input filter, bidirectional power flow, and control for artificial loading of induction motors", Elect. Mach. Power Syst., vol. 28, no. 2, pp. 129-242, 2000.
9. J. Andreu, J. M. De Diego, I. M. de Alegria, I. Kortabarria, J. L. Martin, and S. Ceballos, "New protection circuit for high-speed switching and start-up of a practical matrix converter", IEEE Trans. Ind. Electron., vol. 55, no. 8, pp. 3100-3114, Aug. 2008.
10. J. W. Kolar, M. Baumann, F. Schafmeister, and H. Ertl, "Novel three-phase AC-DC-AC sparse matrix converter", in Proc. IEEE APEC, 2002, vol. 2, pp. 777-791. (Pubitemid 34661110)
11. L. Wei, T. A. Lipo, and H. Chan, "Matrix converter topologies with reduced number of switches", in Proc. IEEE Power Electron. Spec. Conf., 2002, vol. 1, pp. 57-63. (Pubitemid 35411038)
12. S. M. Barakati, M. Kazerani, and J. D. Aplevich, "Maximum power tracking control for a wind turbine system including a matrix converter", IEEE Trans. Energy Convers., vol. 24, no. 3, pp. 705-713, Sep. 2009.
13. R. Cardenas, R. Pena, J. Clare, and P. Wheeler, "Control of the reactive power supplied by a matrix converter", IEEE Trans. Energy Convers., vol. 24, no. 1, pp. 301-303, Mar. 2009.
14. R. Cardenas, R. Pena, G. Tobar, J. Clare, and P. Wheeler, "Stability analysis of a wind energy conversion system based on a doubly fed induction generator fed by a matrix converter", IEEE Trans. Ind. Electron., vol. 56, no. 10, pp. 4194-4206, Oct. 2009.
15. D. Casadei, G. Serra, and A. Tani, "The use of matrix converters in direct torque control of induction machines", IEEE Trans. Ind. Electron., vol. 48, no. 6, pp. 1057-1064, Dec. 2001. (Pubitemid 33149158)
16. S. Lopez Arevalo, P. Zanchetta, P. W. Wheeler, A. Trentin, and L. Empringham, "Control and implementation of a matrix-converter-based AC ground power-supply unit for aircraft servicing", IEEE Trans. Ind. Electron., vol. 57, no. 6, pp. 2076-2084, Jun. 2010.
17. P. W. Wheeler, P. Zanchetta, J. C. Clare, L. Empringham, M. Bland, and D. Katsis, "A utility power supply based on a four-output leg matrix converter", IEEE Trans. Ind. Appl., vol. 44, no. 1, pp. 174-186, Jan./Feb. 2008. (Pubitemid 351314574)
18. F. Yue, P. W. Wheeler, N. Mason, L. Empringham, and J. C. Clare, "Indirect space vector modulation for a 4-leg matrix converter", in Proc. IEEE Power Electron. Spec. Conf., 2007, pp. 639-645.
19. D. Katsis, P. W. Wheeler, J. C. Clare, L. Empringham, and M. Bland, "A utility power supply based on a four-output leg matrix converter", in Conf. Rec. IEEE IAS Annu. Meeting, 2005, vol. 4, pp. 2355-2359. (Pubitemid 44055661)
20. Y. Sun, M. Su, L. Xia, and W. Gui, "Randomized carrier modulation for four-leg matrix converter based on optimal Markov chain", in Proc. IEEE ICIT, 2008, pp. 1-6.
21. T. Tai and J. Chen, "UPS inverter design using discrete-time sliding-mode control scheme", IEEE Trans. Ind. Electron., vol. 49, no. 1, pp. 67-75, Feb. 2002. (Pubitemid 34291357)
22. ∞ loop-shaping controller designs for the single-phase UPS inverters", IEEE Trans. Power Electron., vol. 16, no. 4, pp. 473-481, Jul. 2001. (Pubitemid 32650992)
23. G. Escobar, A. A. Valdez, J. Leyva-Ramos, and P. Mattavelli, "Repetitive-based controller for a UPS inverter to compensate unbalance and harmonic distortion", IEEE Trans. Ind. Electron., vol. 54, no. 1, pp. 504-510, Feb. 2007. (Pubitemid 46444047)
24. Y.-Y. Tzou, S.-L. Jung, and H.-C. Yeh, "Adaptive repetitive control of PWM inverters for very low THD AC-voltage regulation with unknown loads", IEEE Trans. Power Electron., vol. 14, no. 5, pp. 973-981, Sep. 1999. (Pubitemid 30503490)
25. D.-E. Kim and D.-C. Lee, "Inverter output voltage control of three-phase UPS systems using feedback linearization", in Proc. IEEE IECON, 2007, pp. 1737-1742.
26. S. Lopez Arevalo, P. Zanchetta, P. W. Wheeler, A. Trentin, and A. L. Empringham, "Control and implementation of a matrix converter based converter-based ac ground power-supply unit for aircraft servicing", IEEE Trans. Ind. Electron., vol. 57, no. 6, pp. 2076-2084, Jun. 2010.
27. B. Choi, S.-S. Hong, and H. Park, "Modeling and small-signal analysis of controlled on-time boost power-factor-correction circuit", IEEE Trans. Ind. Electron., vol. 48, no. 1, pp. 136-142, Feb. 2001. (Pubitemid 32271126)
28. Y. Tan, J. Chang, and H. Tan, "Adaptive backstepping control and friction compensation for AC servo with inertia and load uncertainties", IEEE Trans. Ind. Electron., vol. 50, no. 5, pp. 944-952, Oct. 2003.
29. P. G. Kini, R. C. Bansal, and R. S. Aithal, "A novel approach toward interpretation and application of voltage unbalance factor", IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 2315-2322, Aug. 2007. (Pubitemid 47296522)