Blocks, Stars and Combs: Complex Macromolecular Architecture Polymers via Click Chemistry

Click Chemistry for Biotechnology and Materials Science

Volumn , Issue , 2009, Pages 89-117

  Sinnwell, Sebastian ^a   Inglis, Andrew J ^a   Stenzel, Martina H ^b   Barner Kowollik, Christopher ^a  

^a UNIVERSITY OF KARLSRUHE   (Germany)

^b UNIVERSITY OF NEW SOUTH WALES   (Australia)

Author keywords

Complex macromolecular architecture polymers via click chemistry; Complex macromolecular architectures blocks, stars and combs; Complex macromolecular architectures with block copolymers; Copper(I) catalyzed azide alkyne cycloaddition (CuAAC); Graft copolymers and three route synthesis; RAFT hetero Diels Alder (HDA) concept; RAFT Z group approach yielding multiarm polymers free from terminated impurities; Reversible addition fragmentation transfer (RAFT) process and atom transfer radical polymerization (ATRP); Star polymers; Using forms of living controlled radical polymerization

Indexed keywords

EID: 80051628302     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470748862.ch6     Document Type: Chapter

References (80)

1. N. Hadjichristidis, M. Pitsikalis, S. Pispas and H. Iatrou, (2001), Polymers with complex architecture by living anionic polymerization, Chem. Rev., 101, 3747-3792.
2. G. Moad, E. Rizzardo and S. H. Thang, (2005), Living radical polymerization by the RAFT process, Aust. J. Chem., 58, 379-410.
3. S. Perrier and P. Takolpuckdee, (2005), Macromolecular design via reversible addition-fragmentation chain transfer (RAFT)/xanthates (MADIX) polymerization, J. Polym. Sci., Part A: Polym. Chem., 43, 5347-5393.
4. A. Favier and M. T. Charreyre, (2006), Experimental requirements for an efficient control of free-radical polymerizations via the reversible addition-fragmentation chain transfer (RAFT) process, Macromol. Rapid Commun., 27, 653-692.
5. C. Barner-Kowollik, T. P. Davis, J. P.A.Heuts,M.H. Stenzel, P.Vana and M. Whittaker, (2003), RAFTing down under: tales of missing radicals, fancy architectures, and mysterious holes, J. Polym. Sci., Part A: Polym. Chem., 41, 365-375.
6. C. J.Hawker, A.W. Bosman and E. Harth, (2001), Newpolymer synthesis by nitroxide mediated living radical polymerizations, Chem. Rev., 101, 3661-3688.
7. K. Matyjaszewski and J. H. Xia, (2001), Atom transfer radical polymerization, Chem. Rev., 101, 2921-2990.
8. L. Barner, T. P. Davis, M. H. Stenzel and C. Barner-Kowollik, (2007), Complex macromolecular architectures by reversible addition fragmentation chain transfer chemistry: theory and practice, Macromol. Rapid Commun., 28, 539-559.
9. K. Matyjaszewski, (2005), Macromolecular engineering: from rational design through precise macromolecular synthesis and processing to targeted macroscopic material properties, Prog. Polym. Sci., 30, 858-875.
10. M. H. Stenzel, L. Cummins, G. E. Roberts, T. R. Davis, P. Vana and C. Barner-Kowollik, (2003), Xanthate mediated living polymerization of vinyl acetate: a systematic variation in MADIX/RAFT agent structure, Macromol. Chem. Phys., 204, 1160-1168.
11. E. E. Malmstrom and C. J. Hawker, (1998), Macromolecular engineering via 'living' free radical polymerizations, Macromol. Chem. Phys., 199, 923-935.
12. G. A. McConnell, A. P. Gast, J. S. Huang and S. D. Smith, (1993), Disorder-order transitions in soft-sphere polymer micelles, Phys. Rev. Lett., 71, 2102-2105.
13. G. A. McConnell and A. P. Gast, (1997), Melting of ordered arrays and shape transitions in highly concentrated diblock copolymer solutions, Macromolecules, 30, 435-444.
14. S. Forster and M. Antonietti, (1998), Amphiphilic block copolymers in structure-controlled nanomaterial hybrids, Adv. Mater., 10, 195±.
15. L. Leibler, (1980), Theory of microphase separation in block copolymers, Macromolecules, 13, 1602-1617.
16. F. S. Bates, (1991), Polymer-polymer phase-behavior, Science, 251, 898-905.
17. G. H. Fredrickson and F. S. Bates, (1996), Dynamics of block copolymers: theory and experiment, Annu. Rev. Mater. Sci., 26, 501-550.
18. A. Harada and K. Kataoka, (1999), Chain length recognition: core-shell supramolecular assembly from oppositely charged block copolymers, Science, 283, 65-67.
19. A. Choucair, C. Lavigueur and A. Eisenberg, (2004), Polystyrene-b-poly(acrylic acid) vesicle size control using solution properties and hydrophilic block length, Langmuir, 20, 3894-3900.
20. H. C. Kolb, M. G. Finn and K. B. Sharpless, Click chemistry: diverse chemical function from a few good reactions, Angew. Chem. Int. Edn, 40, 2004 (2001).
21. P.Wu, A. K. Feldman, A. K. Nugent, C. J. Hawker, A. Scheel, B. Voit, J. Pyun, J. M. J. Frechet, K. B. Sharpless and V. V. Fokin, (2004), Efficiency and fidelity in a click-chemistry route to triazole dendrimers by the copper(I)-catalyzed ligation of azides and alkynes, Angew. Chem. Int. Edn, 43, 3928-3932.
22. B. Helms, J. L. Mynar, C. J. Hawker and J.M. J. Frechet, (2004), Dendronized linear polymers via 'click chemistry', J. Am. Chem. Soc., 126, 15020-15021.
23. D. D. Diaz, S. Punna, P. Holzer, A. K.McPherson, K. B. Sharpless, V. V. Fokin and M. G. Finn, (2004), Click chemistry in materials synthesis. 1. Adhesive polymers from copper-catalyzed azide-alkyne cycloaddition, J. Polym. Sci., Part A: Polym. Chem., 42, 4392-4403.
24. J. A. Opsteen and J. C. M. van Hest, (2005), Modular synthesis of block copolymers via cycloaddition of terminal azide and alkyne functionalized polymers, Chem. Commun., 57-59.
25. D. Quemener, T. P.Davis,C.Barner-Kowollik andM.H. Stenzel, (2006), RAFT and click chemistry: A versatile approach to well-defined block copolymers, Chem. Commun., 5051-5053.
26. K. Tsuda, T. Ishizone, A. Hirao and S. Nakahama, (1993), Protection and polymerization of functional monomers. 19. Synthesis of well-defimned poly(ethynylstyrene)s by means of anionic living polymerization of (trimethylsilyl)ethynylstyrenes, Macromolecules, 26, 6985-6991.
27. W. Agut, D. Taton and S. Lecommandoux, (2007), A versatile synthetic approach to polypeptide based rod-coil block copolymers by click chemistry, Macromolecules, 40, 5653-5661.
28. W. Lin, Q. Fu, Y. Zhang and J. Huang, (2008), One-pot synthesis of ABC type triblock copolymers via a combination of 'click chemistry' and atom transfer nitroxide radical coupling chemistry, Macromolecules, 41, 4127-4135.
29. J. A. Opsteen and J. C.M. Van Hest, (2007), Modular synthesis of ABC type block copolymers by 'click' chemistry, J. Polym. Sci., Part A: Polym. Chem., 45, 2913-2924.
30. W. Van Camp, V. Germonpre, L. Mespouille, P. Dubois, E. J. Goethals and F. E. Du Prez, (2007), New poly(acrylic acid) containing segmented copolymer structures by combination of 'click' chemistry and atom transfer radical polymerization, React. Funct. Polym., 67, 1168-1180.
31. S. R. S. Ting, A. M. Granville, D. Quemener, T. P. Davis, M. H. Stenzel and C. Barner-Kowollik, (2007), RAFT chemistry and Huisgen 1,3-dipolar cycloaddition: a route to block copolymers of vinyl acetate and 6-O-methacryloyl mannose? Aust. J. Chem., 60, 405-409.
32. N. V. Tsarevsky, B. S. Sumerlin and K. Matyjaszewski, (2005), Step-growth 'click' coupling of telechelic polymers prepared by atom transfer radical polymerization, Macromolecules, 38, 3558-3561.
33. N. J. Nasrullah, A.Vora andD. C.Webster, (2008), Block copolymer synthesis by a combination of ATRP and RAFT via click chemsitry using a high throughput approach, Polym. Prepr., 49, 422-423.
34. R. Ranjan and W. J. Brittain, (2007), Combination of living radical polymerization and click chemistry for surface modification, Macromolecules, 40, 6217-6223.
35. W. Agut, R. Agnaou, S. Lecommandoux and D. Taton, (2008), Synthesis of block copolypeptides by click chemistry, Macromol. Rapid Commun., 29, 1147-1155.
36. X. H. He, L. Y. Liang, M. R. Xie, Y. Q. Zhang, S. L. Lin and D. Y. Yan, (2007), Synthesis of novel linear PEO-b-PS-b-PCL triblock copolymers by the combination of ATRP, ROP, and a click reaction, Macromol. Chem. Phys., 208, 1797-1802.
37. G. Mantovani, V. Ladmiral, L. Tao and D. M. Haddleton, (2005), One-pot tandem living radical polymerisation-Huisgens cycloaddition process ("click") catalysed by N-alkyl-2-pyridylmethanimine/Cu(I)Br complexes, Chem. Commun., 2089-2091.
38. J.W. Lee, J. H. Kim, B. K. Kim, J. H. Kim,W. S. Shin and S.H. Jin, (2006), Convergent synthesis of PAMAM dendrimers using click chemistry of azide-functionalized PAMAM dendrons, Tetrahedron, 62, 9193-9200.
39. Y. Li, J.W. Yang and B. C. Benicewicz, (2007), Well-controlled polymerization of 2-azidoethyl methacrylate at near room temperature and click functionalization, J. Polym. Sci., Part A: Polym. Chem., 45, 4300-4308.
40. V. Ladmiral, T. M. Legge, Y. Zhao and S. Perrier, (2008), 'Click' chemistry and radical polymerization: potential loss of orthogonality, Macromolecules, 10.1021/ma8010262.
41. H. Durmaz, B. Colakoclu, U. Tunca and G. Hizal, (2006), Preparation of block copolymers via diels alder reaction of maleimide-and anthracene-end functionalized polymers, J. Polym. Sci., Part A: Polym. Chem., 44, 1667-1675.
42. H. Durmaz, A. Dag, O. Altintas, T. Erdogan, G. Hizal and U. Tunca, (2007), One-pot synthesis of ABC type triblock copolymers via in situ click [3+2] and Diels-Alder [4+2] reactions, Macromolecules, 40, 191-198.
43. A. J. Inglis, S. Sinnwell, T. P. Davis, C. Barner-Kowollik andM. H. Stenzel, (2008), Reversible addition fragmentation chain transfer (RAFT) and hetero-Diels-Alder chemistry as a convenient conjugation tool for access to complex macromolecular designs, Macromolecules, 41, 4120-4126.
44. S. Sinnwell, A. J. Inglis, T. P. Davis, M. H. Stenzel and C. Barner-Kowollik, (2008), An atomefficient conjugation approach to well-defined block copolymers using RAFT chemistry and hetero Diels-Alder cycloaddition, Chem. Commun., 2052-2054.
45. P. L. Golas, N. V. Tsarevsky, B. S. Sumerlin, L. M. Walker and K. Matyjaszewski, (2007), Multisegmented block copolymers by 'click' coupling of polymers prepared by ATRP, Aust. J. Chem., 60, 400-404.
46. J. F. Lutz, H. G. Borner and K. Weichenhan, (2007), 'Click' bioconjugation of a well-defined synthetic polymer and a protein transduction domain, Aust. J. Chem., 60, 410-413.
47. L. Mespouille, M. Vachaudez, F. Suriano, P. Gerbaux, O. Coulembier, P. Degee, R. Flammang and P. Dubois, (2007), One-pot synthesis of well-defined amphiphilic and adaptative block copolymers via versatile combination of 'click' chemistry and ATRP, Macromol. Rapid Commun., 28, 2151-2158.
48. S. Hilf,N.Hanik andA. F.M.Kilbinger, (2008), A'click' approach toROMPblock copolymers, J. Polym. Sci., Part A: Polym. Chem., 46, 2913-2921.
49. M. Jeffries-EL and M. Mitchell, (2008), Efficient synthesis of poly(3-hexylthiophene) block copolymers using 'click' chemistry, Polym. Prepr., 49, 168-169.
50. R. Sachsenhofer and W. H. Binder, (2008), Novel synthesis of poly(isobutylene-blockethyleneoxide), Polym. Prepr., 49, 193-194.
51. H. F. Gao and K. Matyjaszewski, (2006), Synthesis of star polymers by a combination of ATRP and the 'click' coupling method, Macromolecules, 39, 4960-4965.
52. A. Dag, H. Durmaz, G. Hizal and U. Tunca, (2008), Preparation of 3-arm star polymers (A(3)) via Diels-Alder click reaction, J. Polym. Sci., Part A: Polym. Chem., 46, 302-313.
53. X. L. Luo, G. W. Wang, X. C. Pang and J. L. Huang, (2008), Synthesis of a novel kind of amphiphilic graft copolymer with miktoarm star-shaped side chains, Macromolecules, 41, 2315-2317.
54. H. Y. Li, R. Riva, R. Jerome and P. Lecomte, (2007), Combination of ring-opening polymerization and 'click' chemistry for the synthesis of an amphiphilic tadpole-shaped poly(epsiloncaprolactone) grafted by PEO, Macromolecules, 40, 824-831.
55. S. Sinnwell, A. J. Inglis, M. H. Stenzel and C. Barner-Kowollik, (2008), Access to three-arm star block copolymers by a consecutive combination of the copper(I)-catalyzed azide-alkyne cycloaddition and the RAFT hetero Diels-Alder concept, Macromol. Rapid Commun., 29, 1090-1096.
56. D. Quemener, M. Le Hellaye, C. Bissett, T. P. Davis, C. Barner-Kowollik and M. H. Stenzel, (2008), Graft block copolymers of propargyl methacrylate and vinyl acetate via a combination of RAFT/MADIX and click chemistry: Reaction analysis, J. Polym. Sci., Part A: Polym. Chem., 46, 155-173.
57. O. Altintas, B. Yankul, G. Hizal and U. Tunca, (2006), A(3)-type star polymers via click chemistry, J. Polym. Sci., Part A: Polym. Chem., 44, 6458-6465.
58. R. Hoogenboom, B. C. Moore and U. S. Schubert, (2006), Synthesis of star-shaped poly(epsiloncaprolactone) via 'click' chemistry and 'supramolecular click' chemistry, Chem. Commun., 4010-4012.
59. H. F. Gao, K. Min and K. Matyjaszewski, (2007), Synthesis of 3-arm star block copolymers by combination of 'core-first' and 'coupling-onto' methods using ATRP and click reactions, Macromol. Chem. Phys., 208, 1370-1378.
60. M. R. Whittaker, C. N. Urbani and M. J. Monteiro, (2006), Synthesis of 3-miktoarm stars and 1st generation mikto dendritic copolymers by 'living' radical polymerization and 'click' chemistry, J. Am. Chem. Soc., 128, 11360-11361.
61. J. Zhu, X. L. Zhu, E. T. Kang and K. G. Neoh, (2007), Design and synthesis of star polymers with hetero-arms by the combination of controlled radical polymerizations and click chemistry, Polymer, 48, 6992-6999.
62. O. Altintas, G. Hizal and U. Tunca, (2006), ABC-type hetero-arm star terpolymers through 'click' chemistry, J. Polym. Sci., Part A: Polym. Chem., 44, 5699-5707.
63. G. H. Deng, D. Y. Ma and Z. Z. Xu, (2007), Synthesis of ABC-type miktoarm star polymers by 'click' chemistry, ATRP and ROP, Eur. Polym. J., 43, 1179-1187.
64. H. Durmaz, F. Karatas, U. Tunca and G. Hizal, (2006), Preparation of ABC miktoarm star terpolymer containing poly(ethylene glycol), polystyrene, and poly(tert-butylacrylate) arms by combining Diels-Alder reaction, atom transfer radical, and stable free radical polymerization routes, J. Polym. Sci., Part A: Polym. Chem., 44, 499-509.
65. O. Altintas, B. Yankul, G. Hizal and U. Tunca, (2007), One-pot preparation of 3-miktoarm star terpolyrmers via click [3 + 2] reaction, J. Polym. Sci., Part A: Polym. Chem., 45, 3588-3598.
66. G. W. Wang, X. L. Luo, C. Liu and J. L. Huang, (2008), Synthesis of ABCD 4-miktoarm starshaped quarterpolymers by combination of the 'click' chemistry with multiple polymerization mechanism, J. Polym. Sci., Part A: Polym. Chem., 46, 2154-2166.
67. O. Altintas, G. Hizal and U. Tunca, (2008), ABCD 4-miktoarm star quarterpolymers using click [3 + 2] reaction strategy, J. Polym. Sci., Part A: Polym. Chem., 46, 1218-1228.
68. Q. C. Liu, P. Zhao and Y. M. Chen, (2007), Divergent synthesis of dendrimer-like macromolecules through a combination of atom transfer radical polymerization and click reaction, J. Polym. Sci., Part A: Polym. Chem., 45, 3330-3341.
69. C. N. Urbani, C. A. Bell, M. R. Whittaker and M. J. Monteiro, (2008), Convergent synthesis of second generation AB-type miktoarm dendrimers using 'click' chemistry catalyzed by copper wire, Macromolecules, 41, 1057-1060.
70. B. Parrish, R. B. Breitenkamp and T. Emrick, (2005), PEG-and peptide-grafted aliphatic polyesters by click chemistry, J. Am. Chem. Soc., 127, 7404-7410.
71. J. Y. Zhang, Y. M. Zhou, Z. Y. Zhu, Z. S. Ge and S. Y. Liu, (2008), Polyion complex micelles possessing thermoresponsive coronas and their covalent core stabilization via 'click' chemistry, Macromolecules, 41, 1444-1454.
72. N. V. Tsarevsky, S. A. Bencherif and K. Matyjaszewski, (2007), Graft copolymers by a combination of ATRP and two different consecutive click reactions, Macromolecules, 40, 4439-4445.
73. R. Riva, P. Schmeits, F. Stoffelbach, C. Jerome, R. Jerome and P. Lecomte, (2005), Combination of ring-opening polymerization and 'click'' chemistry towards functionalization of aliphatic polyesters, Chem. Commun., 5334-5336.
74. R. Riva, S. Schmeits, C. Jerome, R. Jerome and P. Lecomte, (2007), Combination of ring-opening polymerization and 'click chemistry': toward functionalization and grafting of poly(epsilon-caprolactone), Macromolecules, 40, 796-803.
75. H. Y. Li, R. Riva, H. R. Kricheldorf, R. Jerome and P. Lecomte, (2008), Synthesis of eight-and star-shaped poly(epsilon-caprolactone)s and their amphiphilic derivatives, Chem. Eur. J., 14, 358-368.
76. X. Jiang, E. B. Vogel, M. R. Smith and G. L. Baker, (2008), 'Clickable' polyglycolides: tunable synthons for thermoresponsive, degradable polymers, Macromolecules, 41, 1937-1944.
77. H. F. Gao and K. Matyjaszewski, (2007), Synthesis of molecular brushes by 'grafting onto' method: combination of ATRP and click reactions, J. Am. Chem. Soc, 129, 6633-6639.
78. X. Jiang, M. C. Lok andW. E. Hennink, (2007), Degradable-brushed pHEMA-pDMAEMAsynthesized via ATRP and click chemistry for gene delivery, Bioconjugate Chem., 18, 2077-2084.
79. B. Gacal, H. Durmaz, M. A. Tasdelen, G. Hizal, U. Tunca, Y. Yagci and A. L. Demirel, (2006), Anthracene-maleimide-based Diels-Alder 'click chemistry' as a novel route to graft copolymers, Macromolecules, 39, 5330-5336.
80. C. Ott, R. Hoogenboom and U. S. Schubert, (2008), Post-modification of poly(pentafluorostyrene): a versatile 'click' method to create well-defined multifunctional graft copolymers, Chem. Commun., 3516-3518.