Hazardous air pollutant formation from pyrolysis of typical Chinese casting materials

Environmental Science and Technology

Volumn 45, Issue 15, 2011, Pages 6539-6544

  Wang, Yujue ^a,b   Zhang, Ying ^a   Su, Lu ^a   Li, Xiangyu ^a   Duan, Lei ^a,b   Wang, Chengwen ^a   Huang, Tianyou ^a  

^a TSINGHUA UNIVERSITY   (China)

^b Tsinghua University   (China)

Author keywords

[No Author keywords available]

Indexed keywords

ACIDIC CATALYSTS; ANALYTICAL PYROLYSIS; GAS CHROMATOGRAPHY-MASS SPECTROMETERS; GREEN SAND; HAZARDOUS AIR POLLUTANT EMISSIONS; HAZARDOUS AIR POLLUTANTS; IONIZATION DETECTORS; TEMPERATURE RANGE; THERMOGRAVIMETRIC ANALYZERS; TWO-MATERIALS;

AIR POLLUTION; BENZENE; BINDERS; BITUMINOUS COAL; GAS CHROMATOGRAPHY; GAS EMISSIONS; HAZARDOUS MATERIALS; IONIZATION OF GASES; MASS SPECTROMETRY; NAPHTHALENE; ORGANIC POLLUTANTS; PHENOLS; PYROLYSIS; SPECTROMETERS; THERMOGRAVIMETRIC ANALYSIS; TOLUENE; XYLENE;

CASTING;

BENZENE; BIOMATERIAL; CASTING MATERIAL; COAL; CRESOL; FURAN; META XYLENE; NAPHTHALENE; ORTHO XYLENE; PARA XYLENE; PHENOL; SULFONIC ACID DERIVATIVE; TOLUENE; UNCLASSIFIED DRUG; XYLENESULFONIC ACID;

ATMOSPHERIC POLLUTION; BITUMINOUS COAL; CURIE POINT; FURAN; HAZARDOUS WASTE; MASS SPECTROMETRY; PYROLYSIS; TEMPERATURE EFFECT; THERMOGRAVIMETRY; XYLENE;

ACIDITY; AIR POLLUTANT; ARTICLE; CATALYST; CHINA; DEVICE; ENVIRONMENTAL TEMPERATURE; GAS CHROMATOGRAPHY; HAZARDOUS AIR POLLUTANT; HAZARDOUS WASTE; HIGH TEMPERATURE PROCEDURES; MASS FRAGMENTOGRAPHY; MASS SPECTROMETER; PYROLYSIS; PYROLYZER; QUANTITATIVE ANALYSIS; TEMPERATURE DEPENDENCE; THERMOGRAVIMETRIC ANALYZER; THERMOGRAVIMETRY;

AIR POLLUTANTS; CHINA; COAL; ENVIRONMENTAL MONITORING; FLAME IONIZATION; FURANS; GAS CHROMATOGRAPHY-MASS SPECTROMETRY; HAZARDOUS SUBSTANCES; METALLURGY; METALS; MOLECULAR WEIGHT; TEMPERATURE; THERMOGRAVIMETRY;

EID: 79960956019     PISSN: 0013936X     EISSN: 15205851     Source Type: Journal    
DOI: 10.1021/es200310p     Document Type: Article

References (24)

1. Modern casting staff report. 43rd Census of World Foundry Production-2008. Mod. Cast. 2009, 99, 17-21.
2. Allen, G. R.; Archibald, J. J.; Keenan, T. Hazardous air pollutants: a challenge to metal casting industry Am. Foundry Soc. Trans. 1991, 99, 585-593
3. Pre-Production Air Emission Test Report, Parts 1-3; Technikon Environmental Development Center: McClellan, CA, 2000.
4. Tiedje, N.; Crepaz, R.; Eggert, T.; Bey, N. Emission of organic compounds from mould and core binders used for casting iron, aluminum and bronze in sand moulds J. Environ. Sci. Health, Part A: Toxic/Hazard. Subst. Environ. Eng. 2010, 45, 1866-1876
5. Wang, Y. J.; Huang, H.; Cannon, F. S.; Voigt, R. C.; Komarneni, S.; Furness, J. C. Evaluation of volatile hydrocarbon emission characteristics of carbonaceous additives in green sand foundries Environ. Sci. Technol. 2007, 41, 2957-2963 (Pubitemid 46626427)
6. Dungan, R. S.; Reeves, J. B. Pyrolysis of carbonaceous foundry sand additives: seacoal and gilsonite Thermochim. Acta 2007, 460, 60-66 (Pubitemid 47042134)
7. Dungan, R. S.; Reeves, J. B. Pyrolysis of foundry sand resins: a determination of organic products by mass spectrometry J. Environ. Sci. Health, Part A: Toxic/Hazard. Subst. Environ. Eng. 2005, 40, 1557-1567 (Pubitemid 40863841)
8. Wang, Y. J.; Cannon, F. S.; Salama, M.; Fonseca, D. A.; Giese, S. Characterization of pyrolysis products from a biodiesel phenolic urethane binder Environ. Sci. Technol. 2009, 43 (5) 1559-1564
9. Wang, Y. J.; Cannon, F. S.; Salama, M.; Goudzwaard, J.; Furness, J. C. Characterization of hydrocarbon emissions from green sand foundry core binders by analytical pyrolysis Environ. Sci. Technol. 2007, 41, 7922-7927 (Pubitemid 350133339)
10. Fox, J. R.; Adamovits, M.; Henry, C. Strategies for reducing foundry emissions Am. Foundry Soc. Trans. 2002, 110, 1299-1309
11. LaFay, V. S.; Crandell, G. The addition of cellulose to molding sand when reducing seacoal for emission reduction during pouring, cooling and shakeout Am. Foundry Soc. Trans. 2007, 115, 805-811
12. Eppley, M. C.; Laitar, R. A.; Pahr, E. R.; Roush, D. C.; Tse, R.; Zaretskiy, L. S. Improved phenolic urethane cold box foundry resin system Am. Foundry Soc. Trans. 2005, 113, 505-510
13. Serio, M. A.; Hamblen, D. G.; Markham, J. R.; Solomon, P. R. Kinetics of volatile product evolution in coal pyrolysis: experiment and theory Energ. Fuel. 1987, 1, 138-152
14. Wiktorson, L. P.; Wanzl, W. Kinetic parameters for coal pyrolysis at low and high heating rates-A comparison of data from different laboratory equipment Fuel 2000, 79, 701-706
15. Given, P. H. Chemicals from coal New Sci. 1962, 17, 355-357
16. Speight, J. G. the Chemistry and Technology of Coal; Marcel Dekker: New York, 1994.
17. Gavalas, G. R. Coal Pyrolysis; New York: Elsevier; 1982.
18. Choura, M; Belgacem, N. M.; Gandini, A. Acid-catalyzed polycondensation of furfuryl alcohol: mechanisms of chromophore formation and cross-linking Macromolecules 1996, 29, 3839-3850 (Pubitemid 126520362)
19. Handbook of Adhesive Technology; Pizzi, A.; Mittal, K. L., Eds.; Marcel Dekker: New York, 1994.
20. Shindo, A.; Izumino, K. Structural variation during pyrolysis of furfuryl alcohol and furfural-furfuryl alcohol resins Carbon 1994, 32, 1233-1243
21. Lifshitz, A.; Tamburu, C.; Shashua, R. Decomposition of 2-methylfuran. Experimental and modeling study J. Phys. Chem. A 1997, 101, 1018-1029 (Pubitemid 127578305)
22. Lifshitz, A.; Tamburu, C.; Shashua, R. Thermal decomposition of 2,5-dimethylfuran. Experimental results and computer modeling J. Phys. Chem. A 1998, 102, 10655-10670 (Pubitemid 128663854)
23. Fadden, M. J.; Hadad, C. M. Rearrangement pathways of arylperoxy radicals. 2. Five-membered heterocycles J. Phys. Chem. A 2000, 104, 6324-6331
24. Liu, R. F.; Zhou, X. F.; Zuo, T. M. The pyrolysis mechanism of furan revisited Chem. Phys. Lett. 2000, 325, 457-464