Characterization of pyrolysis products from a biodiesel phenolic urethane binder

Environmental Science and Technology

Volumn 43, Issue 5, 2009, Pages 1559-1564

  Wang, Yujue ^a,b   Cannon, Fred S ^a,c   Salama, Magda ^a   Fonseca, Dania A ^c   Giesex, Scott ^d  

^a The Pennsylvania State University   (United States)

^b TSINGHUA UNIVERSITY   (China)

^c PENNSYLVANIA STATE UNIVERSITY   (United States)

^d UNIVERSITY OF NORTHERN IOWA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AIR EMISSIONS; ANALYTICAL PYROLYSIS; CONDUCTIVITY DETECTIONS; DIMETHYL ADIPATE; DIMETHYL GLUTARATE; EMISSION DATUM; FLASH PYROLYSIS; FULL-SCALE OPERATIONS; GREEN SAND MOLDINGS; HAZARDOUS AIR POLLUTANTS; HEATING CONDITIONS; KEY FEATURES; METHYL ESTERS; METHYL OLEATES; PHENOLIC URETHANES; PYROLYSIS PRODUCTS; SAND CORES; SLOW PYROLYSIS; THERMOGRAVIMETRY-MASS SPECTROMETRIES;

AIR POLLUTION; AROMATIC HYDROCARBONS; BENZENE; BIODIESEL; CHEMICAL REACTIONS; CHROMATOGRAPHIC ANALYSIS; ENVIRONMENTAL PROTECTION AGENCY; ESTERS; GAS CHROMATOGRAPHY; HIGH PERFORMANCE LIQUID CHROMATOGRAPHY; IONIZATION OF GASES; MASS SPECTROMETRY; METAL CASTING; METAL CASTINGS; PHENOLS; PYROLYSIS; THERMOGRAVIMETRIC ANALYSIS; TOLUENE; XYLENE;

BINDERS;

BIODIESEL; URETHAN;

BIOFUEL; EMISSION; MASS SPECTROMETRY; PHENOL; PYROLYSIS;

ARTICLE; GAS CHROMATOGRAPHY; MASS FRAGMENTOGRAPHY; PYROLYSIS; TEMPERATURE SENSITIVITY; THERMAL CONDUCTIVITY; THERMOGRAVIMETRY;

BIOELECTRIC ENERGY SOURCES; CHARCOAL; GAS CHROMATOGRAPHY-MASS SPECTROMETRY; GASES; PHENOLS; TEMPERATURE; THERMOGRAVIMETRY; URETHANE;

EID: 64349090657     PISSN: 0013936X     EISSN: 15205851     Source Type: Journal    
DOI: 10.1021/es8024929     Document Type: Article

References (28)

1. U.S. Department of Energy. Trends Effecting [sic] R&D in the Metalcasting Industry; U.S. Department of Energy, Office of Industrial Technologies: Washington, D.C., March, 1996.
2. Allen, G. R.; Archibald, J. J.; Keenan, T. Hazardous air pollutants: a challenge to metal casting industry. Am. Foundry Soc. Trans. 1991, 99, 585-593.
3. McKinley, M. D.; Jefcoat, I. A.; Herz, W. J.; Frederick, C. Air emissions from foundries: a current survey of literature, suppliers and foundrymen. Am. Foundry Soc. Trans. 1993, 101, 979-990.
4. Technikon Environmental Development Center. Pre-production Air Emission Test Report: Technikon, LLC: McClellan, CA, 2000; Parts 1-3.
5. Glowacki, C. R.; Crandell, G. R.; Cannon, F. S.; Voigt, R. C.; Clobes, J. K.; Furness, J. C.; McComb, B. A.; Knight, S. M. Emissions studies at a test foundry using an advanced oxidation-clear water system. Am. Foundry Soc. Trans 2003, 111, 579-598i.
6. Goudzwaard, J. E.; Kurtti, C. M.; Andrews, J. H.; Cannon, F. S.; Voigt, R. C.; Firebaugh, J. E.; Furness, J. C.; Sipple, D. L. Foundry emissions effects with an advanced oxidation blackwater system. Am. Foundry Soc. Trans. 2003, 111, 1191-1211.
7. Trinowski, D. M.; Ladegourdie, G.; Lochte, K. New coldbox binder system for improved productivity. Am. FoundrySoc. Trans. 1999, 107, 51-57.
8. Wang, Y. J.; Cannon, F. S.; Salama, M.; Goudzwaard, J.; Furness, J. C. Characterization of hydrocarbon emissions from green sand foundry core binders by analytical pyrolysis. Environ. Sci. Technol. 2007, 41, 7922-7927.
9. Eppley, M. C.; Laitar, R. A.; Pahr, E. R.; Roush, D. C.; Tse, R.; Zaretskiy, L. S. Improved phenolic urethane cold box foundry resin system. Am. Foundry Soc. Trans. 2005, 113, 505-510.
10. Abichou, T.; Benson, C. H.; Edil, T. B. Foundry green sands as hydraulic barriers: laboratory study. J. Geotech. Geoenviron. 2000, 126, 1174-1183.
11. Ji, S.; Wan, L.; Fan, Z. The toxic cmpounds and leaching characteristics of spent foundry sands. Water Air Soil Pollut. 2001, 132, 347-364.
12. Dungan, R. S.; Lee, B. D.; Shouse, P.; de Koff, J. P. Saturated hydraulic conductivity of soils blended with waste foundry sands. Soil Sci. 2007, 172, 751-758.
13. Wang, Y. J.; Cannon, F. S.; Komarneni, S.; Voigt, R. C.; Furness, J. C. Mechanisms of advanced oxidation processing on bentonite consumption reduction in foundry. Environ. Sci. Technol. 2005, 39, 7712-7718.
14. Wang, Y. J.; Huang, H.; Cannon, F. S.; Voigt, R. C.; Komarneni, S.; Furness, J. C. Evaluation of hydrocarbon emission characteristics of typical carbonaceous additives in green sand foundries. Environ. Sci. Technol. 2007, 41, 2957-2963.
15. Dungan, R. S.; Reeves, J. B. Pyrolysis of carbonaceous foundry sand additives: seacoal and gilsonite. Thermochim. Acta 2007, 460, 60-66.
16. Lytle, C. A.; Bertsch, W.; McKinley, M. D. Determination of thermal decomposition products from aphenolic urethane resin by pyrolysis-gas chromatography-mass spectrometry. J. High Resolution Chromatogr. 1998, 21, 128-132.
17. Dungan, R. S.; Reeves, J. B. Pyrolysis of foundry sand resins: a determination of organic products by mass spectrometry. J. Environ. Sci. Health, Part A 2005, 40, 1557-1567.
18. Wang, Y. J.; Cannon, F. S.; Voigt, R. C.; Komarneni, S.; Furness, J. C. Effects of advanced oxidation on green sand properties via iron casting into green sand molds. Environ. Sci. Technol. 2006, 40, 3095-3101.
19. Dempsey, T. C.; LaFay, V. S.; Neltner, S. L.; Taulbee, D. N. Understanding properties of carbonaceous additives and their potential emit benzene. Am. Foundry Soc. Trans. 1997, 105, 109-117.
20. Lafay, V. S.; Neltner, S. L.; Taulbee, D. N; Wellbrock, R. J. Evaluating emission characteristics of seacoal and seacoal supplements using advanced analytical techniques. Am. Foundry Soc. Trans. 2000, 108, 713-718.
21. Wang, Y J.; Cannon, F. S.; Neill, D.; Crawford, K; Voigt, R. C.; Furness, J. C.; Glowacki, C. R. Effects of advanced oxidation treatment on green sand properties and emissions. Am. Foundry Soc. Trans. 2004, 112, 635-648.
22. Chen, J. H.; Tsai, H. L. An efficient and accurate numerical algorithm for multi-dimensional modeling of casting solidification, part I: control volume method. Am. Foundry Soc. Trans. 1990, 98, 527-537.
23. Shih, T. S.; Hsiua, S. S.; Hong, C. H. Movements of vaporization interface and temperature distributions in green sand molds. Am. Foundry Soc. Trans. 1996, 104, 481-489.
24. Hsiau, S. S.; Chang, W. J. Cooling analysis of castings in green sand molds. Am. Foundry Soc. Trans. 1998, 106, 595-600.
25. Jakab, E.; Faix, O.; Till, F. Thermal decomposition of milled lignins studied by thermogravimetry/mass spectrometry. J. Anal. Appl. Pyrol. 1997, 40-41, 171-186.
26. 2. J. Anal. Appl. Pyrol. 1997, 43, 59-69.
27. Arenillas, A.; Pevida, C.; Rubiera, F.; Pis, J. J. Comparison between the reactivity of coal and synthetic coal models. Fuel 2003, 82, 2001-2006.
28. Karayildirim, T.; Yanik, J.; Yuksel, M.; Bockhorn, H. Characterization of products from pyrolysis ofwaste sludges. Fuel 2006, 82, 1498-1508.