Mechanical behavior of recycled polypropylene composites under tensile, bending, and creep loading: Experimental and modeling

Journal of Engineering Materials and Technology

Volumn 133, Issue 3, 2011, Pages

  Rogueda Berriet, Cécile ^a   Bahlouli, Nadia ^b   Pessey, Daniel ^b   Rémond, Yves ^b  

^a UNIVERSITÉ DE FRANCHE COMTÉ   (France)

^b UNIVERSITÉ DE STRASBOURG   (France)

Author keywords

EPDM; EPR; HiPP; mechanical behavior; PP compound; recycling process

Indexed keywords

BENDING TESTS; CREEP; FILLED POLYMERS; PARAMAGNETIC RESONANCE; PLASTICS INDUSTRY; POLYPROPYLENES; TALC;

ELASTIC MODULUS VALUES; ELASTICITY PARAMETERS; EPDM; HIPP; MACROSCOPIC BEHAVIORS; MECHANICAL BEHAVIOR; RECYCLED POLYPROPYLENE; RECYCLING PROCESS;

PLASTIC RECYCLING;

EID: 79960662024     PISSN: 00944289     EISSN: 15288889     Source Type: Journal    
DOI: 10.1115/1.4004051     Document Type: Article

References (26)

1. Friedrich, K., and Karsch, U. A., 1983, "Failure Processes in Particulate Filled Polypropylene," Fiber Sci. Technol., 18(1), pp. 37-52.
2. Maiti, S., and Sharma, N. K. K., 1992, "Studies on Polypropylene Composites Filled With Talc Particles Part I Mechanical Properties," J. Mater. Sci., 27, pp. 4605-4613.
3. Duffo, P., Monnase, B., Haudin, J. M., G'Sell, C., and Dahoun, A., 1995, "Rheology of Polypropylene in the Solid State," J. Mater. Sci., 30, pp. 701-711.
4. Alonso, M., Velasco, J. I., and De Saja, J. A., 1997, "Constrained Crystallization and Activity of Filler in Surface Modified Talc Polypropylene Composites," Eur. Polym. J., 33, pp. 255-262. (Pubitemid 127442572)
5. Fond, C., and G'Sell, C., 2002, "Localisation des déformations et mécanismes d'endommagements dans les polymères multiphasés," Méc. Ind., 3, pp. 431-438. (Pubitemid 36094061)
6. Castagnet, S., and Grandidier, J. C., 2006, "Structural Effect in the Creep Behavior of Thermoplastic Pressure Pipes at High Temperature-Role of Geometrical Defects," Arch. Appl. Mech., 76, pp. 567-578. (Pubitemid 44707250)
7. Standard, directive 2000/53/EC of the European parliament and of the council, 2000.
8. Luda, M. P., Ragosta, G., Musto, P., Pollicino, A., Camino, G., Recca, A., and Nepote, V., 2002, "Natural Ageing of Automotive Polymer Components: Characterisation of New and Used Poly(propylene) based Car Bumpers," Macromol. Mater. Eng., 287, pp. 404-411.
9. Luda, M. P., Ragosta, G., Musto, P., Acierno, D., Di Maio, L., Camino, G., and Nepote, V., 2003, "Regenerative Recycling of Automotive Polymer Components: Poly(propylene) Based Car Bumpers," Macromol.Mater. Eng., 288, pp. 613-411.
10. Guerrica-Echevarria, G., Eguiazabal, J. I., and Nazabal, J., 1996, "Effects of Reprocessing Conditions on the Properties of Unfilled and Talc-Filled Polypropylene," Polym. Degrad. Stab. 53, pp. 1-8. (Pubitemid 126363167)
11. Bahlouli, N., Pessey, D., Ahzi, S., and Rémond, Y., 2006, "Mechanical Behavior of Composite Based Polypropylene: Recycling and Strain Rate Effects," J. Phys. IV 134, pp. 1319-1323. (Pubitemid 44681807)
12. Pessey, D., Bahlouli, N., Pattofato, S., and Ahzi, S., 2008, "Polymer Composites for the Automotive Industry: Characterisation of the Recycling Effect on the Strain Rate Sensitivity," Int. J. Crashworthiness, 13(4), pp. 411-424.
13. Aurrekoetxea, J., Sarrionandia, M. A., Urrutibeascoa, I., and Maspoch, M. L., 2001, Effects of Recycling on the Microstructure and the Mechanical Properties of Isotactic Polypropylene," J. Mater Sci., 36, pp. 2607-2613. (Pubitemid 32610927)
14. Zhou, Y., and Mallick P. K., 2002, "Effects of Temperature and Strain Rate on the Tensile Behavior of Unfilled and Talc-Filled Polypropylene. Part I: Experiments," Polym. Eng. Sci., 42(12), pp. 2449-2460.
15. Patlazhan, S., Hizoum, K., and Rémond, Y., 2008, "Stress-Strain Behavior of High-Density Polyetylene Below the Yield Point: Effect of Unloading Rate," Polym. Sci., Ser. A, 50(5), pp. 507-513.
16. Hizoum, K., Rémond, Y., Bahlouli, N., Oshmyan, V., Patlazhan, S., and Ahzi, S., 2006, "Non Linear Strain Rate Dependency and Unloading Behavior of Semi-Cristalline Polymers," Oil Gas Sci. Technol., 61(6), pp. 743-749. (Pubitemid 46111412)
17. Oshmyan, V., Patlazhan, S., Rémond, Y., "Principles of Structural-Mechanical Modeling of Polymers and Composites," Polym. Sci., Ser. A, 48(9), pp.1004-1013.
18. Pessey, D., Bahlouli, N., Ahzi, S., and Khaleel M. A., 2008, "Strain Rate Effects on the Mechanical Response of Polypropylene-Based Composites Deformed at Small Strains," Polym. Sci., Ser. A, 50(6), pp. 690-697.
19. Denac, M., Musil, V., and Šmit, I., 2005, "Polypropylene= Talc=SEBS (SEBSg- MA) Composites. Part 2. Mechanical Properties," Composites, Part A, 36(9), pp. 1282-1290. (Pubitemid 41000163)
20. Liang, J. Z., and Li, R. K. Y., 2000, "Rubber Toughening in Polypropylene: A Review," J. Appl. Polym. Sci. 77(2), pp. 409-417.
21. Oksuz, M., Eroglu, M., and Yildirim, H., 2006, "Effect of Talc on the Properties of Polypropylene/Ethylene/Propylene/Diene Terpolymer Blends," J. Appl. Polym. Sci., 101(5), pp. 3033-3039. (Pubitemid 44220939)
22. Hadal R. S., and Misra, R. D. K., 2004, "The Influence of Loading Rate and Concurrent Microstructural Evolution in Micrometric Talc- and Wollastonite- Reinforced High Isotactic Polypropylene Composites," Mater. Sci. Eng. A, 374, pp. 374-389. (Pubitemid 38728298)
23. Collyer, A. A., 1994, Rubber Toughened Engineering Plastics, Chapman and Hall, London.
24. G'Sell, C., Hiver, J. M., and Dahoun, A., 2002, "Experimental Characterization of Deformation Damage in Solid Polymers Under Tension, and its Interrelation With Necking," Int. J. Solids Struct., 39(13-14), pp. 3857-3872. (Pubitemid 34801333)
25. Trantina, G., and Oehler, P., 1994, Proceedings of ANTEC, Society of Plastics Engineers Publisher, San Francisco, CA, Vol. 3, 3106.
26. Addiego, F., G'Sell, C., Dahoun, A., and Hiver, J. M., 2002, Université d'été, APOLLOR 02, Nancy, France.