Improvement of carbon nanofibers/ZrO2 composites properties with a zirconia nanocoating on carbon nanofibers by sol-gel method

Journal of the American Ceramic Society

Volumn 94, Issue 7, 2011, Pages 2048-2052

  Borrell, Amparo ^a   Rocha, Victoria G ^b   Torrecillas, Ramon ^a   Fernández, Adolfo ^b  

^a CINN CSIC UNIOVI PA   (Spain)

^b Parque Tecnológico de Asturias   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

CERAMIC NANOCOMPOSITES; HOMOGENEOUS DISTRIBUTION; NANO-COATINGS; POWDER MIXTURES; SPS SINTERING; SURFACE COATINGS; WET CHEMICAL ROUTE;

CARBON NANOFIBERS; CERAMIC MATERIALS; COATINGS; DISSIMILAR MATERIALS; ELECTRIC PROPERTIES; INDUSTRIAL APPLICATIONS; NANOCOMPOSITES; SOL-GEL PROCESS; SPARK PLASMA SINTERING; ZIRCONIA; ZIRCONIUM ALLOYS;

MECHANICAL PROPERTIES;

EID: 79960249725     PISSN: 00027820     EISSN: 15512916     Source Type: Journal    
DOI: 10.1111/j.1551-2916.2010.04354.x     Document Type: Article

References (38)

1. S. Iijima, " Helical Microtubules of Graphitic Carbon," Nature, 354, 56-8 (1991). (Pubitemid 21896780)
2. A. Merkoci, " Carbon Nanotubes in Analytical Sciences," Microchim. Acta, 152 [3-4] 157-74 (2006). (Pubitemid 41827336)
3. T. Uchida, P. D. Anderson, M. L. Minus, and, S. J. Kumar, " Morphology and Modulus of Vapor Grown Carbon Nano Fibers," J. Mater. Sci., 41 [18] 5851-6 (2006). (Pubitemid 44386631)
4. A. V. Melechko, V. I. Merkulov, T. E. McKnight, M. A. Guillorn, K. L. Klein, D. H. Lowndes, and, M. L. Simpson, " Vertically Aligned Carbon Nanofibers and Related Structures: Controlled Synthesis and Directed Assembly," J. Appl. Phys., 97 [4] 041301, 39pp (2005).
5. P. HvizdosÌ, V. PuchÃ, A. Duszová, and, J. Dusza, " Tribological Behavior of Carbon Nanofiber-Zirconia Composite," Scr. Mater., 63 [2] 254-7 (2010).
6. C. S. Balazsi, Z. Kõnya, F. Wéber, L. P. Birõ, and, P. Aratõ, " Preparation and Characterization of Carbon Nanotube Reinforced Silicon Nitride Composites," Mater. Sci. Eng. C, 23 [6-8] 1133-7 (2003). (Pubitemid 38143533)
7. J. Tatami, T. Katashima, K. Komeya, T. Meguro, and, T. Wakihara, " Electrically Conductive CNT-Dispersed Silicon Nitride Ceramics," J. Am. Ceram. Soc., 88 [10] 2889-3 (2005).
8. S. Maensiri, P. Laokul, J. Klinkaewnarong, and, V. Amornkitbamrung, " Carbon Nanofiber-Reinforced Alumina Nanocomposites: Fabrication and Mechanical Properties," Mater. Sci. Eng. A, 447 [1-2] 44-50 (2007). (Pubitemid 46075918)
9. K. Hirota, H. Hara, and, M. Kato, " Mechanical Properties of Simultaneously Synthesized and Consolidated Carbon Nanofiber (CNF)-Dispersed SiC Composites by Pulsed Electric-Current Pressure Sintering," Mater. Sci. Eng. A, 458 [1-2] 216-25 (2007). (Pubitemid 46555032)
10. J. Dusza, G. Blugan, J. Morgiel, J. Kuebler, F. Inam, T. Peijs, M. J. Reece, and, V. Puchy, " Hot Pressed and Spark Plasma Sintered Zirconia/Carbon Nanofiber Composites," J. Eur. Ceram. Soc., 29 [15] 3177-84 (2009).
11. 2 on W for Metal-Insulator-Metal Capacitor Application," Appl. Phys. Lett., 82 [17] 2874-6 (2003).
12. S. Kobayashi, and, W. Kawai, " Development of Carbon Nanofiber Reinforced Hydroxyapatite with Enhanced Mechanical Properties," Composites: Part A, 38 [1] 114-23 (2007). (Pubitemid 44792485)
13. J. Sun, L. Gao, M. Iwasa, T. Nakayama, and, K. Niihara, " Failure Investigation of Carbon Nanotube/3Y-TZP Nanocomposites," Ceram. Int., 31 [8] 1131-4 (2005). (Pubitemid 41162451)
14. T. Ukai, T. Sekino, A. Hirvonen, N. Tanaka, T. Kusunose, T. Nakayama, and, K. Niihara, " Preparation and Electrical Properties of Carbon Nanotubes Dispersed Zirconia Nanocomposites," Key Eng. Mater., 317-318, 661-4 (2006). (Pubitemid 44074526)
15. A. Duszová, J. Dusza, K. TomásÄk, J. Morgiel, G. Blugand, and, J. Kuebler, " Zirconia/Carbon Nanofiber Composite," Scr. Mater., 58 [6] 520-3 (2008).
16. X. Wang, N. P. Padture, and, H. Tanaka, " Contact-Damage-Resistant Ceramic/Single-Wall Carbon Nanotubes and Ceramic/Graphite Composites," Nat. Mater., 3, 539-44 (2004).
17. G. D. Zhan, J. D. Kuntz, J. E. Garay, and, A. K. Mukherjee, " Electrical Properties of Nanoceramics Reinforced with Ropes of Single-Walled Carbon Nanotubes," Appl. Phys. Lett., 83 [6] 1228-30 (2003).
18. R. G. Joanna, and, Z. Antonios, " Sintering Activation by External Electrical Field," Mater. Sci. Eng. A, 287 [2] 171-7 (2000).
19. W. Yucheng, and, F. Zhengyi, " Study of Temperature Field in Spark Plasma Sintering," Mater. Sci. Eng. B, 90 [1-2] 34-7 (2002). (Pubitemid 34116108)
20. S. Shukla, and, S. Seal, " Mechanisms of Room Temperature Metastable Tetragonal Phase Stabilization in Zirconia," Inter. Mater. Rev., 50 [1] 1-20 (2005).
21. H. Kumazawa, T. Inoue, and, E. Sada, " Synthesis of Fine Spherical Zirconium Particles by Controlled Hydrolysis of Zirconium Alkoxide in High Temperature Range above 50°C," Chem. Eng. J., 55, 93-6 (1991).
22. 2(001)," J. Am. Chem. Soc., 120 [51] 13503-12 (1998). (Pubitemid 29025216)
23. K. Matsui, H. Suzuki, and, M. Ohagi, " Raman Spectroscopic Studies on the Formation Mechanism of Hydrous-Zirconia Fine Particles," J. Am. Ceram. Soc., 78 [1] 146-52 (1995).
24. 2 Prepared by High-Energy Ball Milling," Phys. Rev. B, 71 [22] 224107-16 (2005).
25. W. Pyda, K. Haberko, and, M. M. Bucko, " Hydrothermal Crystallization of Zirconia and Zirconia Solid Solutions," J. Am. Ceram. Soc., 74 [10] 2622-9 (1991).
26. 3 Solid Solutions at Low Temperature," J. Eur. Ceram. Soc., 20 [2] 139-45 (2000). (Pubitemid 32212248)
27. C. Y. Tai, B. Y. Hsiao, and, H. Y. Chiu, " Preparation of Silazane Grafted Yttria-Stabilized Zirconia Nanocrystals via Water/CTAB/Hexanol Reverse Microemulsion," Mater. Lett., 61 [3] 834-6 (2007). (Pubitemid 44855982)
28. C. Y. Tai, M. H. Lee, and, Y. C. Wu, " Control of Zirconia Particle Size by using Two-Emulsion Precipitation Technique," Chem. Eng. Sci., 56 [7] 2389-98 (2001).
29. C. Y. Tai, and, B. Y. Hsiao, " Characterization of Zirconia Powder Synthesized via Reverse Microemulsion Precipitation," Chem. Eng. Commun., 192 [10-12] 1525-40 (2005). (Pubitemid 41386687)
30. L. Ci, J. Wei, B. Wei, J. Liang, C. Xu, and, D. Wu, " Carbon Nanofibers and Single-Walled Carbon Nanotubes Prepared by the Floating Catalyst Method," Carbon, 39 [3] 329-35 (2001). (Pubitemid 32139009)
31. A. F. Kirstein, and, R. M. Woolley, " Symmetrical Bending of Thin Circular Elastic Plates on Equally Spaced Point Supports," J. Res. Natl. Bur. Stand. C, 71, 1-10 (1967).
32. F. F. Vitman, and, V. P. Pukh, " A Method for Determining the Strength of Sheet Glass," Zavod. Lab., 29, 863-7 (1963).
33. ASTM. STM Annual Book of Standards, Vol 15.02, Section 16. Standard F394-78. American Society for Testing and Materials, Philadelphia, PA, 1996. 466-490.
34. S. R. Choi, and, N. P. Bansal, " Alumina-Reinforced Zirconia Composites "; pp. 437-57 in Handbook of Ceramic Composites, 1st edition, Edited by, N. P. Bansal,. Cleveland, OH, 2005.
35. 2(3Y) by Spark Plasma Sintering," J. Eur. Ceram. Soc., 20 [14-15] 2441-5 (2000).
36. A. Borrell, A. Fernandez, C. Merino, and, R. Torrecillas, " High Density Carbon Materials Obtained at Relatively Low Temperature by Spark Plasma Sintering of Carbon Nanofibers," Int. J. Mater. Res., 101 [1] 112-8 (2010).
37. 2-Carbon Nanofiber Composite," Scr. Mater., 61 [3] 253-6 (2009).
38. B. Lauwer, J. P. Kruth, W. Liu, W. Eeraerts, B. Schacht, and, P. Bleys, " Investigation of Material Removal Mechanisms in EDM of Composite Ceramic Materials," J. Mater. Process. Technol., 149, 347-52 (2004).