Coefficient of friction in mixed film lubrication: Gears versus twin-discs

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Volumn 221, Issue 3, 2007, Pages 399-411

  Castro, J ^a   Seabra, J ^b  

^a INSTITUTO SUPERIOR DE ENGENHARIA DO PORTO   (Portugal)

^b UNIVERSITY OF PORTO   (Portugal)

Author keywords

Gear friction; Mixed film lubrication

Indexed keywords

EXTRAPOLATION; FRICTION; GEAR TEETH; LUBRICATING OILS; MATHEMATICAL MODELS; RHEOLOGY; SHEAR STRESS; SURFACE ROUGHNESS; TRACTION (FRICTION);

FRICTION COEFFICIENT; MESHING LINE; MIXED FILM LUBRICATION;

ELASTOHYDRODYNAMIC LUBRICATION;

ELASTOHYDRODYNAMIC LUBRICATION; EXTRAPOLATION; FRICTION; GEAR TEETH; LUBRICATING OILS; MATHEMATICAL MODELS; RHEOLOGY; SHEAR STRESS; SURFACE ROUGHNESS; TRACTION (FRICTION);

EID: 34250612662     PISSN: 13506501     EISSN: None     Source Type: Journal    
DOI: 10.1243/13506501JET257     Document Type: Conference Paper

References (28)

1. Sottomayor, A., Campos, A., Seabra, J., Flamand, L., and Nélias, D. Experimental evaluation and numerical simulation of MIL-L-23699 traction curves. In Proceedings of the 30th Leeds-Lyon Symposium on Tribology, Lyon, France, 2-5 September 2003, Tribology Series 43, 2004, pp. 651-661 (Elsevier, Amsterdam, The Nertherlands).
2. Winter, H. and Michaelis, K. FZG gear test rigdescription and test possibilities. Co-ordinate European Council Second International Symposium on The Performance Evaluation of Automotive Fuels and Lubricants, Wolfsburg, West Germany, 5-7 June 1985, pp. 29-42.
3. Castro, J. Gripagem de engrenagens FZG lubrificadas com óleos base. Novos critérios de gripagem globais e locais. PhD Thesis, Demegi, FEUP, November 2004.
4. Hohn, B.-R., Michaelis, K., and Doleschel, A. Frictional behaviour of synthetic gear lubricants. In Tribology research: from model experiment to industrial problem. (Eds G. Dalmaz et al.), 2001, pp. 759-768 (Elsevier Science B. V., Amsterdam, The Nertherlands).
5. Castro, J., Campos, A., Sottomayor, A., and Seabra, J. Gear friction coefficient in mixed lubrication. In Proceedings of Leeds-Lyon Symposium on Tribology and interface engineering, Tribology Series 48, Life Cycle Tribology, 2005, pp. 525-536 (Elsevier).
6. Höhn, B.-R., Michaelis, K., and Vollmer, T. Thermal rating of gear drives balance between power loss and heat dissipation. AGMA Technical Paper, October 1996, 96FTM8, 12pp.
7. Sottomayor, A., Seabra, J., Campos, A., and Ferreira, L. Thermal and non-Newtonian analysis of EHD line contacts. In Proceedings of the 21st Leeds-Lyon Symposium on Tribology, Tribology Series 30, Lubricants and Lubrication, 1995, pp. 229-247.
8. Robbe-Valoire, F. Theoretical prediction and experimental results for mixed lubrication between parallel surfaces. In Boundary and mixed lubrication: science and applications (Eds D. Dowson et al.), Tribology series 40, 2002, pp. 129-137 (Elsevier Science, Amsterdam, The Netherlands).
9. Williams, J. A. Advanced in the modeling of boundary lubrication. In Boundary and mixed lubrication: science and applications (Eds D. Dowson et al.), Tribology series 40, 2002, pp.37-48, (Elsevier Science, Amsterdam, The Netherlands).
10. ASME Tribology Division Technical Committee. Life ratings for modern rolling bearings: a design guide for the application of international standard ISO 281/2 (Ed. R. Barnsby), 2003 (ASME Int., New York).
11. Gelinck, E. R. M. and Shipper, D. J. Calculation of Stribeck curves for line contacts. Tribol. Int., 33, 2000, 175-181.
12. Hamrock, B. J. Fundamentals of fluid film lubrications. In Mechanical engineering series, 1994 (McGraw-Hill International).
13. Horng, J. H. Contact analysis of rough surfaces under transaction conditions in sliding line lubrication. Wear, 1998, 219, 205-212.
14. Zhu, D. and Hu, Y. A computer program package for the prediction of EHL and mixed lubrication characteristics, friction, subsurface stresses and flash temperatures based on measured 3-D surface roughness. STLE Tribol. Trans., 2001, 44(3), 383-309.
15. Ciulli, E. Friction in lubricated contacts: from macro to microscale effects. In Fundamentals of tribology and bridging the gap between the macro and microl/nanoscales (Ed. B. Bhushan), 2001, pp. 725-734 (Kluwer Academic Publishers, Dordrecht, The Netherlands).
16. Winter, H. and Michaelis, K. Scoring load capacity of gears lubricated with EP-oils. AGMA Fall Technical Meeting, Montreal, Canada, October 1983.
17. Ai, X. and Cheng, H. S. A transient EHL analysis for line contacts with measured surface roughness using multigrid technique. ASME J. Tribol., 1994, 116, 549-558.
18. Barral, R. Modélisation du champ depression, du film de lubrifiant et des contraintes tangentielles dans un contact EHD rugueux. Premières études des contraintes engendrées dans les massifs. Rapport technique T03, Etude du pitting de matérieux d'engrenages de boites de vitesses manuelles-approche théorique et pratique, RVBV 10 (RENAULT-DIMAT) e 98.21.01 (INEGI-CETRIB), 1999.
19. Dowson, D. and Higginson, G. R. Elastohydrodynamic lubrication, S.I. edition, 1997 (Pergamon Press Ltd, Oxford).
20. Gohar, R. Elastohydrodynamics. In Ellis Horwood series in mechanical engineering, 1988 (John Wiley & Sons, New York, USA).
21. Bair, S. and Winer, W. A rheological model for elastohydrodynamic contacts based on primary laboratory data. ASME J. Lubr. Technol., 1979, 101, 258-265.
22. Tevaarwerk, J. L. Traction calculations using the shear plane hypothesis. In Proceeding of the 6th Leeds-Lyon Symposium on Tribology, Lyon, September 1979, pp. 201-213.
23. Cheng, H. S. Gears. In Modern tribology handbook (Ed. B. Bhushan), vol. 2, 2001, ch. 29 (CCR Press, Boca Raton, Florida, USA).
24. Cheng, H. Analytical modeling of mixed lubrication performance. In Boundary and mixed lubrication: science and applications (Eds. D. Dowson et al.), Tribology Series 40, 2002, pp. 19-33 (Elsevier Science, Amsterdam, The Netherlands).
25. Epstein, D., Yu, T., Wang, J. Keer, L. Cheng, H., and Liu, S. An efficient method of analysing the effect of roughness on fatigue life in mixed EHL contact. STLE, Tribol. Trans., 2003, 46(2), 273-281.
26. Seabra, J. and Berthe, D. Influence of surface waviness and roughness on the normal pressure distribution in a Hertzian contact. J. Tribol., 1987, 109, 462-470.
27. Seabra, J. Influence de l'ondulation des surfaces sur le comportement des contacts Hertziens secs ou lubrifies. PhD Thesis, no 8ISAL0018, INSA, Lyon, 1988.
28. Campos, A. Determinação da geometria do filme lubrificante, da distribuição de pressão e das tensñoes de corte num contacto elastohidrodinâ mico. Aplicação a rolamentos de rolos. MSc Thesis, Demegi, FEUP, 1994.