Insight, innovation, and the big picture in system design

Systems Engineering

Volumn 14, Issue 3, 2011, Pages 223-238

  Bonnema, G Maarten ^a  

^a UNIVERSITY OF TWENTE   (Netherlands)

Author keywords

application; cases; FunKey; innovation; insight; system design; the big picture; TRIZ

Indexed keywords

CASES; FUNKEY; INSIGHT; THE BIG PICTURE; TRIZ;

SYSTEMS ANALYSIS; TEACHING;

DESIGN;

EID: 79960189612     PISSN: 10981241     EISSN: 15206858     Source Type: Journal    
DOI: 10.1002/sys.20174     Document Type: Article

References (39)

1. W. Alink, Systematic, conceptual re-design of a waste baler, Master thesis, University of Twente, Enschede, The Netherlands, 2007.
2. G.S. Altshuller, 40 principles-TRIZ keys to technical innovation, TRIZ Tools 1, Technical Innovation Center, Worcester, MA, 1997.
3. G.S. Altshuller, The innovation algorithm: TRIZ, systematic innovation and technical creativity, Technical Innovation Center, Worcester, MA, 1999.
4. B.S. Blanchard, and, W.J. Fabrycky, Systems, 3rd edition, Prentice Hall, Upper Saddle River, NJ, 1988.
5. G.M. Bonnema, "Function and budget based system architecting," Tools and methods of competitive engineering, I. Horváth, and, J. Duhovnik, (Editors), TMCE 2006, Delft University of Technology, Ljubljana, Slovenia, 2006, pp. 1306-1318.
6. G.M. Bonnema, "TRIZ for systems architecting," TRIZ future 2006, J.R. Duflou, J. D'hondt, T. Devoldere, S. Dewulf, and, N. Dekeyser, (Editors), Dejonghe, Belgium, 2006b, pp. 87-92.
7. G.M. Bonnema, FunKey architecting-an integrated approach to system architecting using functions, key drivers and system budgets, Ph.D. thesis, University of Twente, Enschede, The Netherlands, 2008.
8. G.M. Bonnema, and, F.J. van Houten, "Conceptual design in a high-tech environment," Methods and tools for co-operative and integrated design, S. Tichkiewitch, and, D. Brissaud, (Editors), Kluwer Academic, Dordrecht, 2004, pp. 171-182.
9. G.M. Bonnema, and, F.J. van Houten, Use of models in conceptual design, J Eng Des 17 (6) (2006), 549-562.
10. G.M. Bonnema, I.F. Lutters-Weustink, and, F.J. van Houten, Introducing systems engineering to industrial design engineering students with hands-on experience, 18th Int Conf Syst Eng (ICSEng05); IEEE Computer Society, Las Vegas, NV, 2005, 408-413. (Pubitemid 46028579)
11. G.M. Bonnema, P.D. Borches, R.G. Kauw-A-Tjoe, and, F.J.v. Houten, Communication: Key factor in multidisciplinary system design, 8th Annu Conf Syst Eng Res (CSER), Stevens Institute of Technology, Hoboken, NJ, 2010, pp. 11-20.
12. 2 method for systems partitioning, Syst Eng 8 (2) (2005), 109-118. (Pubitemid 41311607)
13. L.-K. Chan, and, M.-L. Wu, Quality function deployment: A literature review, Eur J Oper Res 143 (3) (2002), 463-497.
14. L.-K. Chan, and, M.-L. Wu, A systematic approach to quality function deployment with a full illustrative example, Omega 33 (2) (2005), 119-139. (Pubitemid 39615358)
15. J. Daniels, and, T. Bahill, The hybrid process that combines traditional requirements and use cases, Syst Eng 7 (4) (2004), 303-319. (Pubitemid 41289481)
16. J. de Andres Sanchez, and, A. Terceno Gomez, Applications of fuzzy regression in actuarial analysis, J Risk Insurance 70 (4) (2003), 665-699. (Pubitemid 37528249)
17. A.G. Dorée, Gemeentelijk Aanbesteden-Een Onderzoek naar de Samenwerking Tussen Diensten Gemeentewerken en Aannemers in de Grond-, Weg- En Waterbouwsector; Ph.D. thesis (in Dutch); University of Twente, Enschede, The Netherlands, 1996.
18. A.O. Eger, D. Lutters, and, F.J. van Houten, Create the future, Int Eng Product Des Ed Conf; Delft, The Netherlands, 2004, pp. 43-50.
19. S. Finger, and, J.R. Dixon, A review of research in mechanical engineering design. Part I: Descriptive, prescriptive, and computer-based models of design processes, Res Eng Des 1 (1) (1989a), 51-67.
20. S. Finger, and, J.R. Dixon, A review of research in mechanical engineering design. Part II: Representations, analysis, and design for the life cycle; Res Eng Des 1 (2) (1989b), 121-137.
21. H. Frericks, W. Heemels, G.J. Muller, and, J. Sandee, "Budget-based design," Boderc: Model-based design of high-tech systems, W. Heemels, and, G.J. Muller, (Editors), Embedded Systems Institute, Eindhoven, The Netherlands, 2006, pp. 59-76.
22. J. Goldenberg, R. Horowitz, A. Levav, and, D. Mazursky, Finding your innovation sweet spot, Harvard Bus Rev 81(3) (March 2003), 120-129.
23. R.K. Gulatti, and, S.D. Eppinger, The coupling of product architecture and organizational structure decisions; Working Paper 3906; MIT Sloan School of Management, Cambridge, MA, 1996.
24. INCOSE SEH Working Group, Systems engineering handbook, 2nd edition, INCOSE, Seattle, WA, 2000.
25. INCOSE, SEH Working Group, Systems engineering handbook, 3rd edition, INCOSE, Seattle, WA, 2008.
26. M. Ivashkov, and, V. Souchkov, Establishing priority of TRIZ inventive principles in early design, Design 2004, Dubrovnik, Croatia, 2004.
27. P. Kruit, The role of MEMS in maskless lithography, Microelectron Eng 84(5-8) (2007), 1027-1032. (Pubitemid 46678332)
28. D. Lutters, Manufacturing integration based on information management, Ph.D. thesis, University of Twente, Enschede, The Netherlands, 2001.
29. M.W. Maier, and, E. Rechtin, The art of systems architecting, 2nd edition, CRC Press, Boca Raton, FL, 2000.
30. J.N. Martin, and, H.L. Davidz, Systems engineering case study development, 5th Annu Conf Syst Eng Res 2007 (CSER2007); Stevens Institute of Technology, Hoboken, NJ, 2007.
31. G.J. Muller, CAFCR: A multi-view method for embedded systems architecting, Ph.D. thesis, Delft University of Technology, Delft, The Netherlands, 2004.
32. G.J. Muller, Do useful multi-domain methods exist? 3rd Conf Syst Eng Res (CSER2005), Hoboken, NJ, 2005.
33. G.J. Muller, Design objectives and design understandability, accessed on June 7, 2007.
34. Object Management Group, The Official OMG SysML Site, Needham, MA, accessed on October 6, 2008.
35. J.A. Ruder, and, D.K. Sobek, Experiment on a system-level design tool, J Eng Des 18 (4) (2007), 327-342.
36. Y. Shimomura, H. Takeda, M. Yoshioka, Y. Umeda, and, T. Tomiyama, Representation of design object based on the functional evolution process model, Des Theory Methodol DTM'95, ASME, 1995, pp. 351-360.
37. C. Smith, and, D. Verma, Conceptual system design evaluation: Rating and ranking versus compliance analysis, Syst Eng 7 (4) (2004), 338-351. (Pubitemid 41289483)
38. N.P. Suh, The principles of design, Oxford Series on Advanced Manufacturing; Oxford University Press, New York, Oxford, 1990.
39. T. Tomiyama, and, Y. Umeda, A CAD for functional design, Ann CIRP 42 (1) (1993), 143-146.