The impact of selective oxidation on the phase transformation in the sub-surface of advanced high strength steels

Steel Research International

Volumn 82, Issue 7, 2011, Pages 839-846

  Norden, M ^a   Paul, G ^a   Blumenau, M ^b   Heller, T ^a   Peters, K J ^a  

^a THYSSENKRUPP STEEL EUROPE AG   (Germany)

^b ThyssenKrupp Steel Europe AG   (Germany)

Author keywords

Advanced High Strength Steels (AHSS); continuous hot dip galvanizing; Matlab; phase transformation; selective oxidation; sub surface; ThermoCalc

Indexed keywords

ADVANCED HIGH STRENGTH STEEL; HOT-DIP GALVANIZING; PHASE TRANSFORMATION; SELECTIVE OXIDATION; SUB-SURFACES; THERMOCALC;

ANNEALING; BAINITIC TRANSFORMATIONS; GLOW DISCHARGES; MANGANESE; METADATA; OXIDATION; STEEL SHEET; TEMPERATURE; TERNARY SYSTEMS;

HIGH STRENGTH STEEL;

EID: 79960005602     PISSN: 16113683     EISSN: None     Source Type: Journal    
DOI: 10.1002/srin.201000268     Document Type: Article

References (37)

1. T. Hallfeld:, Possibilities and challenges using advanced high strength steel sheet for automotive applications. Conf. Proc, International Symposium on Niobium Microalloyed Sheet Steel for Automotive Application, Warrendale. (2006).
2. K.-P. Imlau, and, T. Heller:, New Steel Solutions for the Worldwide Car Industry. Steel Research Int. Vol. 07 (2007) 3, S. 180-184. (Pubitemid 46549290)
3. Y.-F. Gong, S. Birosca, S.-J. H.-S.Kim, and, B.-C. De Cooman:, Processing of TRIP Steels in Continuous Galvanizing Lines: Surface and Sub-Surface Oxidation Study. Conf. Proc, Materials Science and Technology (MS&T), Pittsburgh (2007), S. 535-545.
4. Y.-F. Gong, S.-K. Han, and, B.-C. De Cooman:, Formation of Surface and Subsurface Oxides during Ferritic, Intercritical and Austenitic Annealing of CMnSi TRIP Steel. ISIJ International Vol. 48 (2008) 12, S. 1745-1751.
5. Y.-F. Gong, S.-K. Han, and, B.-C. De Cooman:, Internal Oxidation during Intercritical Annealing of CMnSi TRIP Steel. ISIJ International Vol. 49 (2009) 4, S. 557-563.
6. F.-E. Goodwin:, Current Topics in Galvanizability of Advanced High Strength Steels. Conf. Proc, International Conference on Microalloyed Steels: Processing, Microstructure, Properties and Performance, Pittsburgh (2009), S. 11-22.
7. J. Mahieu, S. Claessens, B.-C. De Cooman, and, F.-E. Goodwin:, Galvanizing of AHSS: Influence of the Surface and Sub-Surface of Si-, Al- and P-alloyed TRIP-aided Steel after Intercritical Annealing. Conf. Proc, Materials Science and Technology (MS&T), Pittsburgh (2004), S. 847-857. (Pubitemid 40610312)
8. E.-M. Bellhouse, A.-I.-M. Mertens, and, J.-R. McDermind:, Development of the surface structure of TRIP steels prior to hot-dip galvanizing. Materials Science and Engineering. A (2007) 463, S. 147-156.
9. E.-M. Bellhouse, and, J.-R. McDermid:, Effect of Oxygen Partial Pressure during Annealing on the selective Oxidation and Galvanizing of a 1.5% Al TRIP-Assisted Steel. Conf. Proc, Materials Science and Technology (MS&T), Pittsburgh (2009), S. 913-924.
10. E.-M. Bellhouse, and, J.-R. McDermid:, Selective Oxidation and Reactive Wetting of 1.0% Si-0.5% Al and 1.5% Si TRIP-assisted steels. Metallurgical and Materials Transactions A Vol. 41A (2010) 6, S. 1539-1553.
11. E. M. Bellhouse, and, J. R. McDermid:, Analysis of the Fe-Zn interface of galvanized high Al-low Si TRIP steels. Materials Science and Engineering: A Vol. 491 (2008) 1-2, S. 39-46.
12. B. Schuhmacher, T. Heller, M. Steinhorst, and, W. Warnecke:, Recent development of high strength steels with zinc or zinc alloy coating in europe. Conf. Proc, Galvatech 07, Osaka (2007), S. 397-402.
13. H. Saint-Raymond, F. Bertrand, and, D. Huin:, Kinetics of Oxidation and Reduction of high strength steels in annealing Furnaces. Conf. Proc, Galvatech 04, Chiba (2004), S. 383-390. (Pubitemid 43342647)
14. L. Bordignon, X. Vanden Eynde, J. Paavilainen, H. Bolt, R. Heekens, H. Deinhammer, W. Mascheck, and, G. Angeli:, Enhanced hot dip galvanizing by controlled oxidation in the annealing furnace. RFCS Final Report No. 7210-Pr/118 (2002).
15. L. Bordignon, and, X. Vanden Eynde:, Zinc wetting during hot dip galvanising. La Revué de Métallurgie (2007), S. 300-307.
16. Y. Suzuki, Y. Sugimoto, and, S. Fujita:, Effect on internal oxidation layer formed during recrystallization annealing on selective surface oxidation behaviour of Si, Mn bearing high-strength sheet steels. Conf. Proc, International Conference on Steels in Cars and Trucks (SCT 2008), Wiesbaden (2008), S. 407-414.
17. H. Liu, R. Y.Heekens, and, L. Li:, Application of thermodynamics and Wagner model on two problems in continuous hot-dip galvanizing. Applied Surface Science Vol. 256 (2009), S. 1399-1403.
18. C. Wagner:, Reaktionstypen bei der Oxydation von Legierungen. Zeitschrift für Elektrochemie Vol. 59 (1959) 12, S. 772-782.
19. H.-J. Grabke, V. Leroy, and, H. Vielhaus:, Segregation on the Surface of Steels in Heat Treatment and Oxidation. ISIJ International Vol. 35 (1995) 2, S. 95-113.
20. D. Huin, P. Flauder, and, J.-B. Leblond:, Numerical Simulation of Internal Oxidation of Steels during Annealing Treatments. Oxidation of Metals Vol. 64 (2005) 1/2, S. 131-167. (Pubitemid 41118095)
21. D. Huin, H. Saint-Raymond, D. Loison, F. Bertrand, and, M.-J. Cornu:, Selective Oxidation During Annealing of Steels: A Comparison between Modelling and Experimental Results. Conf. Proc, Galvatech 04, Chiba (2004), S. 1135-114.
22. Y. Suzuki, T. Yamashita, Y. Sugimoto, S. Fujita, and, S. Yamaguchi:, Thermodynamic Analysis of Selective Oxidation Behaviour of Si and Mn-added Steel during Recrystallization Annealing. ISIJ International Vol. 49 (2009) 4, S. 564-573.
23. X. Vanden Eynde, J.-P. Servais, and, M. Lamberigts:, Surface oxide maturation and self-reduction: a new process to ensure TRIP steel hot dip galvanising. Conf. Proc, Galvatech 04, Chiba (2004), S. 361-372. (Pubitemid 43342645)
24. J. Drillet, Z. Zermount, D. Bouleau, J.-M. Mataigne, and, S. Claessens:, Selective Oxidation of high Si, Mn and Al steel grade during Recrystallization Annealing and steel/Zn reactivity. Conf. Proc, Galvatech 04, Chiba (2004), S. 1123-1134. (Pubitemid 43342718)
25. Z. Zhang, I.-R. Sohn, F.-S. Pettit, G.-H. Meier, and, S. Sridhar:, Investigation of the Effect of Alloying Elements and Water Vapour Contents on the Oxidation and Decarburization of Transformation-Induced Plasticity Steels. Metallurgical and Materials Transactions B Vol. 40B (2009) S. 567-584.
26. T. Van de Putte, J. Penning, S. Claessens, and, Z. Zermount:, Surface analysis of the selective oxidation during austenitic annealing of CMnSi high strength steel. Conf. Proc, Galvatech 07, Osaka (2007), S. 415-420.
27. B. Chatelain, and, V. Leroy:, Gas-metal reactions during batch annealing of cold-rolled steels. Steel Research Int. Vol. 57 (1986) 1, S. 13-17.
28. H. Falk, and, M. Falk:, A Study of Surface Reactions on Steel Samples Using a Mass Spectrometer Probe. Steel Research Int. Vol. 81 (2010) 4, S. 320-324.
29. M. Norden:, Heterogene Glühgas/Metall-Reaktionen in der Schmelztauchveredelung höherfester Mehrphasenstähle, RWTH-Aachen, Thesis, Aachen 2010.
30. M.-V. Li, D.-V. Niebuhr, L.-L. Meekisho, and, D.-G. Atteridge:, A Computational Model for the Prediction of Steel Hardenability. Metallurgical and Materials Transactions B Vol. 29 B (1998) S. 661-672.
31. A. Perlade, O. Bouaziz, and, Q. Furnémont:, A physically based model for TRIP-aided carbon steels behaviour. Materials Science and Engineering. A Vol. 356 (2003) 1-2, S. 145-152. (Pubitemid 37008020)
32. Gutierrez et. al.: Mechanical property models for high-strength complex microstructures 2010.
33. S. van der Zwaaga, and, J. Wang:, A discussion on the atomic mechanism of the bainitic reaction in TRIP steels. Scripta Materialia Vol. 47 (2002) 3, S. 169-173. (Pubitemid 34802411)
34. S. Swaminathan, T. Koll, A.-D. Wieck, and, M. Spiegel:, Hot Dip Galvanizing Simulation of Interstitial Free Steel by Liquid Zinc Spin Coater: Influence of Dew Point on Surface Chemistry and Wettability. Steel Research Int. Vol. 78 (2008) 1, S. 66-72. (Pubitemid 351238963)
35. Li. Shu, X. Beak, S. S.-I. ung-Il, C.-S. Oh, S.-J. Kim, and, Y.-W. Kim:, Oxide formation of transformation-induced plasticity-aided steel during dew-point control. Scripta Materialia Vol. 57 (2007) 2, S. 113-116. (Pubitemid 46678888)
36. F.-D. Richardson, and, J.-H.-R. Jeffes:, The thermodynamics backgrounds of iron and steel making processes. I-The blast-furnace. Journal of the Iron and Steel Institute Vol. 163 (1949) S. 397-420.
37. F.-D. Richardson, and, J.-H.-R. Jeffes:, The thermodynamics of substances of interest in iron and steel making. III-Sulphides. Journal of the Iron and Steel Institute Vol. 171 (1952) S. 165-175.