Thermodynamic analysis of selective oxidation behavior of Si and Mn-added steel during recrystallization annealing

ISIJ International

Volumn 49, Issue 4, 2009, Pages 564-573

  Suzuki, Yoshitsugu ^a   Yamashita, Takako ^a   Sugimoto, Yoshiharu ^a   Fujita, Sakae ^a   Yamaguchi, Shu ^b  

^a JFE STEEL CORPORATION   (Japan)

^b UNIVERSITY OF TOKYO   (Japan)

Author keywords

Chemical potential diagram; Galvanizing; Phase diagram; Selective oxidation; Thermodynamics

Indexed keywords

CHEMICAL COMPOSITIONS; CHEMICAL POTENTIAL DIAGRAM; CHEMICAL POTENTIAL DIAGRAMS; CONTINUOUS GALVANIZING LINES; FILM FORMATIONS; GALVANIZED STEEL SHEETS; HIGH STRENGTH; HIGH-STRENGTH STEEL SHEET; INWARD DIFFUSION; OXIDATION FILM; OXYGEN FLUXES; PROCESS CONTROL MODELS; PSEUDOTERNARY PHASE DIAGRAMS; REACTION PATHS; RECRYSTALLIZATION-ANNEALING; SELECTIVE OXIDATION; SELECTIVE SURFACE; SIMULATION MODEL; SURFACE CONTROLS; SURFACE LAYERS; SURFACE OXIDATION BEHAVIOR; THERMO DYNAMIC ANALYSIS; THERMODYNAMIC CALCULATIONS;

CHEMICAL POTENTIAL; CHEMICALS; GALVANIZED METAL; GALVANIZING; IRON OXIDES; MANGANESE; MANGANESE COMPOUNDS; OXYGEN; PHASE DIAGRAMS; SILICON; SILICON COMPOUNDS; STEEL; STEEL SHEET; STRENGTH OF MATERIALS; SURFACE DIFFUSION; THERMOANALYSIS; THERMODYNAMICS; ZINC;

INTERNAL OXIDATION;

EID: 68149182794     PISSN: 09151559     EISSN: None     Source Type: Journal    
DOI: 10.2355/isijinternational.49.564     Document Type: Article

References (38)

1. For examples, K. Yamazaki: Sosei-to-Kako, 46 (2005), No. 7, 565 and N. Yoshinaga: Jidoushayou Zairyou Symposium (Vehicle Materials Symposium), ISIJ, (2006), 15.
2. H. Kagechika, Proc. of the 7th Int. Conf. on Zinc and Zinc Alloy Coated Sheet Steels Galvatech'07, ISIJ, Tokyo, (2007), I.
3. N. Birks and G. H. Meier, translated by K. Nishida and T. Narita: Introduction to high temperature oxidation of metals, Maruzen, (1988), 18.
4. Y. Hirose, H. Togawa and J. Sumitani: Tetsu-to-Hagané, 68 (1982), 665.
5. A. Nishimoto, J. Inagaki and K. Nakaoka: Tetsu-to-Hagané, 68 (1982), 1404.
6. C. Kato, T. Sekine, S. Unimo, T. Yamashita, K. Mochizuki and M. Masuda: CAMP-ISIJ, 7 (1994), 1511.
7. Y. Suzuki and K. Kyono: J. Surf. Finish. Soc. of Jpn., 55 (2004), 48.
8. P. Drillet, Z. Zermout, D. Bouleau, J. Mataigne and S. Claessens: Proc. of the 6th Int. Conf. on Zinc and Zinc Alloy Coated Sheet Steels Galvatech'04, AIST, Warrendale, USA, (2004), 1123.
9. I. Hashimoto, K. Saito, M. Nomura, T. Yamamoto and H. Takeda: Tetsu-to-Hagané, 89 (2003), 31.
10. J. Mahieu, M. De Meyer, B. C. De Cooman and S. Claessens: Galvanised Steel Sheet Forum-Automotive, IOM, London, (2000), 185.
11. D. Huin, H.-S. Raymond, D. Loison, F. Bertrand and M.-J. Cornu: Proc. of the 6th Int. Conf. on Zinc and Zinc Alloy Coated Sheet Steels Galvatech'04, AIST, Warrendale, USA, (2004), 1135.
12. I. Parezanovic and M. Spiegel: Proc. of the 6th Int. Conf. on Zinc and Zinc Alloy Coated Sheet Steels Galvatech'04, AIST, Warrendale, USA, (2004), 401.
13. E. Bellhouse and J. McDermid: Proc. of the 7th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech'07), ISIJ, Tokyo, (2007), 487.
14. S. Swaminathanl, T. Koll, M. Pohl and M. Spiegel: 7th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech'07), ISIJ, Tokyo, (2007), 460.
15. R. Shastryl, J. A. R. and T. W. Kaiser: 7th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech'07), ISIJ, Tokyo, (2007), 403.
16. Y. Suzuki, Y. Sugimoto and S. Fujita: 2nd Int. Conf. on Steels in Cars and Trucks (SCT2008), Stahleisen, Düsseldorf, Germany, (2008), 407.
17. I. Olefjord, W. Leijon and U. Jelvestam: Appl. Surf. Sci., 6 (1980), 241.
18. T. Yamashita, A. Yamamoto and C. Kato: CAMP-ISIJ, 7 (1994), 388.
19. P. Drillet, Z. Zermout, D. Bouleau and J. M. Mataigne: Proc. of 5th Int. Conf. on Zinc and Zinc Alloy Coated Sheet Steels Galvatech'01, Brussels, Belgium, Verlag Stahleisen Gmbh, Düsseldorf, (2001), 195.
20. M.-L. Giorgi, J.-B. Guillot, A. Ollivier and F. Goodwin: 7th Int. Conf. on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech'07), ISIJ, Tokyo, (2007), 409.
21. Y. Suzuki, Y. Sugimoto and S. Fujita: CAMP-ISIJ, 19 (2006), 1142.
22. T. Yamashita: Ph.D. Thesis, Waseda University, (2000).
23. Y. Suzuki, Y. Sugimoto and S. Fujita: Tetsu-to-Hagané, 93 (2007), 489.
24. R. J. Borg and D. Y. F. Lai: J. Appl. Phys., 41 (1970), 5193.
25. K. Nohara and K. Hirano: Proc. Int. Conf. Sci. Tech. Iron & Steel, ISIJ, Tokyo, (1970), 1267.
26. C. W Bale, P. Chartrand, S. A. Decterov, G. Eriksson, K. Hack, R. B. Mahfoud, J. Melancon, A. D. Pelton and S. Petersen: Calphad, 62 (2002), 189.
27. M. Otani: Tetsu Yakin Netsurikigaku, Nikkann Kogyo, (1971), 208.
28. N. Morito and T. Ichida: Corro. Sci., 17 (1977), 961.
29. N. Morito and T. Ichida: Scr. Metall., 10 (1976), 619.
30. C. Wagner: Z. Elektrochemie, 63 (1959), 772.
31. I. Svedung and N. G. Vannenberg: Corros. Sci., 14 (1974), 391.
32. Kinzoku Zairyo no Koon Sanka to Koon Fushoku, ed. by Fushoku Boshoku Kyokai, Maruzen, (1982), 61.
33. For example, Tekko Binran III (3rd ed.) (I), ed. by ISIJ, (1980) 657, Tekko Binran VI (3rd ed.), ed. by ISIJ, (1980) 424, Reien Kohan Manual, ed. by ISIJ, (1996) 43.
34. M. Hori, T. Nakamori and N. Usuki: CAMP-ISIJ, 8 (1995), 648.
35. E. M. Bellhouse, A. I. Mertens and J. R. McDermid: Mater. Sci. Eng. A, A463 (2007), 147.
36. J. Mahieu, B. C. De Cooman and S. Claessens: 5th Int. Conf. on Zinc and Zinc Alloy Coated Sheet Steels Galvatech'01, Stahleisen, Düsseldorf, Germany, (2001), 644.
37. J. Maki, J. Mahieu, B. C. De Cooman and S. Claessens: 5th Int. Conf. on Zinc and Zinc Alloy Coated Sheet Steels Galvatech'01, Stahleisen, Düsseldorf, Germany, (2001), 623.
38. J. Mahieu, B. C. De Cooman, S. Claessens and F. E. Goodwin: 6th Int. Conf. on Zinc and Zinc Alloy Coated Sheet Steels Galvatech'04, AIST, Warrendale, USA, (2004), 529.