High-temperature vapor deposition polymerization polyimide coating for elimination of surface nano-flaws in high-strength carbon fiber

Carbon

Volumn 49, Issue 12, 2011, Pages 3881-3890

  Naganuma, Tamaki ^a   Naito, Kimiyoshi ^a   Yang, Jenn Ming ^b  

^a NATIONAL INSTITUTE FOR MATERIALS SCIENCE   (Japan)

^b UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COATING PROCESS; COLD SUBSTRATES; DIHYDRIDES; DIP-COATING PROCESS; HIGH EFFICIENCY; HIGH TEMPERATURE; HIGH-STRENGTH; POLYIMIDE COATING; SURFACE FLAW; VAPOR DEPOSITION POLYMERIZATION;

COATINGS; FIBERS; MONOMERS; POLYIMIDES; POLYMERIZATION; TENSILE STRENGTH;

CARBON FIBERS;

EID: 79959937337     PISSN: 00086223     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.carbon.2011.05.026     Document Type: Article

References (33)

1. B.G. Demczyk, Y.M. Wang, J. Cunnings, M. Hetman, W. Han, and A. Zettl Direct mechanical measurement of the tensile strength and elastic modulus of multiwalled carbon nanotubes Mater Sci Eng A 334 2002 173 178 (Pubitemid 34915652)
2. C.D. Tran, W. Humphries, S.M. Smith, C. Huynh, and S. Lucas Improving the tensile strength of carbon nanotube spun yarns using a modified spinning process Carbon 47 2009 2662 2670
3. X. Zhang, Q. Li, Y. Tu, Y. Li, J.Y. Coulter, and L. Zheng Carbon-nanotube fibers spun from long carbon-nanotube arrays Small 3 2007 244 248
4. S.L. Gao, E. Mader, and R. Plonka Nanocomposite coatings for healing surface defects of glass fibers and improving interfacial adhesion Compos Sci Technol 68 2008 2892 2901
5. S.L. Gao, E. Mader, and R. Plonka Nanostructured-coatings of glass fibers: improvement of alkali resistance and mechanical properties Acta Mater 55 2007 1043 1052 (Pubitemid 46027658)
6. T. Naganuma, K. Naito, J.M. Yang, J. Kyono, D. Sasakura, and Y. Kagawa The effect of a compliant polyimide nanocoating on the tensile properties of a high strength PAN-based carbon fiber Compos Sci Technol 69 2009 1319 1322
7. K. Naito, Y. Tanaka, J.M. Yang, and Y. Kagawa Tensile properties of ultrahigh strength PAN-based, ultrahigh modulus pitch-based and high ductility pitch-based carbon fibers Carbon 46 2007 189 195
8. S. Ochiai, K. Osamura, and K. Honjo Influence of fracture of coating layer on fiber strength Mater Sci Eng A 159 1992 149 154 (Pubitemid 23571789)
9. K. Honjo, and A. Shindo Influence of carbide formation on the strength of carbon fibres on which silicon and titanium have been deposited J Mater Sci 21 1986 2043 2048 (Pubitemid 16570494)
10. D.D. Himbeault, R.A. Varin, and K. Piekarski Carbon fibres coated with titanium carbide using the liquid metal transfer agent technique J Mater Sci 24 1986 2246 2250
11. T. Helmer, H. Peterilik, and K. Kromp Coating of carbon fibers - the strength of the fibers J Am Ceram Soc 78 1995 133 136
12. N.I. Baklanova, B.N. Zaitsev, A.T. Titov, and T.M. Zima The chemistry, morphology, topography of titanium carbide modified carbon fibers Carbon 4 2008 261 271
13. P. Bertrand, M.H. Vidal-Sétif, R. Valle, and R. Mévrel On the effects of surface treatments on the mechanical strength of carbon fibres J Mater Sci 33 1998 5029 5036 (Pubitemid 128511158)
14. K. Naito, J.M. Yang, Y. Tanaka, and Y. Kagawa Tensile properties of carbon nanotubes grown on ultrahigh strength polyacrylonitrile-based and ultrahigh modulus pitch-based carbon fibers Appl Phys Lett 92 2008 231912
15. R.J. Sager, P.J. Klein, D.C. Lagoudas, Q. Zhang, J. Liu, and L. Dai Effect of carbon nanotubes on the interfacial shear strength of T650 carbon fiber in an epoxy matrix Compos Sci Technol 69 2009 898 904
16. Q. Zhang, J. Liu, R. Sager, L. Dai, and J. Baur Hierarchical composites of carbon nanotubes on carbon fiber: influence of growth condition on fiber tensile properties Compos Sci Technol 69 2009 594 601
17. P. Zinck, M.F. Pays, R. Rezakhanlou, and J.F. Gerard Mechanical characterisation of glass fibres as an indirect analysis of the effect of surface treatment J Mater Sci 34 1999 2121 2133
18. P. Zinck, M. Mader, and J.F. Gerard Role of silane coupling agent and polymeric film former for tailoring glass fiber sizings from tensile strength measurements J Mater Sci 36 2001 5245 5252 (Pubitemid 33092939)
19. S. Feih, A. Thraner, and H. Lilholt Tensile strength and fracture surface characterisation of sized and unsized glass fibers J Mater Sci 40 2005 1615 1623 (Pubitemid 41536812)
20. C. Ahlstrom, and J.F. Gerard The adhesion of elastomer-coated glass fibers to an epoxy matrix. Part I: the effect of the surface treatments on the tensile strength of the glass fibers Polym Compos 16 1995 305 312
21. O.P. Bahl, R.B. Mathur, and T.L. Dhami Effects of surface treatment on the mechanical properties of carbon fibers Polym Eng Sci 24 1984 455 459 (Pubitemid 14623690)
22. T. Skourlis, T. Duvis, and C.D. Papaspyrides The role of a polyamide interphase on carbon fibres reinforcing an epoxy matrix Compos Sci Technol 48 1993 119 125 (Pubitemid 23690157)
23. J.C. Coburn, and M.T. Pottiger Thermal curing in polyimide films and coatings M.K. Ghosh, K.L. Mittal, Polyimides fundamentals and applications 1996 Marcel Dekker New York 207 230
24. H. Hatori, Y. Yamada, M. Shiraishi, and Y. Takahashi Carbonization and graphitization of polyimide coated on carbon fiber Carbon 29 1991 679 680 (Pubitemid 21649949)
25. M. Iijima, and Y. Takahashi Electrical, thermal and mechanical properties of polyimide thin films prepared by high-temperature vapor deposition polymerization High Perform Polym 5 1993 229 237
26. M. Iijima, and Y. Takahashi Vapor deposition polymerization: a study on film formation in reaction of pyromellitic anhydride and bis(4-aminophenyl) ether Macromolecules 22 1989 2944 2946
27. Y. Kawabuchi, M. Kishino, S. Kawano, D.D. Whitehurst, and I. Mochida Carbon deposition from benzene and cyclohexane onto active carbon fiber to control its pore size Langmuir 12 1996 4281 4285 (Pubitemid 126567925)
28. T. Kyotani Control of pore structure in carbon Carbon 38 2000 269 286 (Pubitemid 30560162)
29. Catalog for Toray Industries Inc. High performance carbon fiber Torayca; 2004 [in Japanese].
30. I. Langmuir The vapor pressure of metallic tungsten Phys Rev 2 1913 329 342
31. Y. Takahashi, K. Matsuzaki, M. Iijima, E. Fukada, S. Tsukahara, and Y. Murakami Determination of evaporation rate and vapor pressure of organic monomers used for vapor deposition polymerization Jpn J Appl Phys 32 1993 L875 L878
32. R. Dutt, Y. Takahashi, and M. Iijima Vapor pressure and mean adsorption time of pyromellitic diangydride and 4,4′-oxidniline Jpn J Appl Phys 38 1999 687 690
33. Monomer data-base for ULVAC, Inc. [in Japanese].