High-Temperature Oxidation

Uhlig's Corrosion Handbook: Third Edition

Volumn , Issue , 2011, Pages 247-280

  Sequeira, C A C ^a  

^a INSTITUTO SUPERIOR TÉCNICO   (Portugal)

Author keywords

High temperature oxidation oxidation of metals, between gas and solids, producing a solid reaction product; Multilayered scale growth formation of corrosion scales on metals or alloys; Three dimensional defects stress generation in oxide layer underlying metals, through scale cracking, spalling of oxide and stratification phenomena

Indexed keywords

EID: 79958802599     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470872864.ch20     Document Type: Chapter

References (232)

1. R. Streiff, J. Stringer, R. C. Krutenat, and M. Caillet (Eds.), High Temperature Corrosion of Materials and Coatings for Energy Systems and Turboengines, Elsevier Sequoia, Lausanne, 1987.
2. R. Streiff, J. Stringer, R. C. Krutenat, and M. Caillet (Eds.), High Temperature Corrosion, Vol. 2: Advanced Materials and Coatings, Elsevier, London, 1989.
3. R. Streiff, J. Stringer, R. C. Krutenat, and M. Caillet (Eds.), High Temperature Corrosion and Protection of Materials, Vol. 3, Les ÉEditions de Physique, Les Ulis, 1993.
4. R. Streiff, J. Stringer, R. C. Krutenat, M. Caillet, and R.A. Rapp,(Eds.), High Temperature Corrosion and Protection of Materials Vol. 4, Trans. Tech. Publications, Zurich, 1997.
5. R. Streiff, I. G. Wright, R. C. Krutenat, M. Caillet, and A Galerie (Eds.), High Temperature Corrosion and Protection of Materials, Vol. 5, Trans. Tech. Publications, Züurich, 2001.
6. P. Steinmetz, I. G. Wright, G. Meier, A. Galerie, B. Pieraggi, and R. Podor, (Eds.), High Temperature Corrosion and Protection of Materials, Vol. 6, Trans. Tech. Publications, Züurich, 2004.
7. S. Taniguchi, T. Maruyama, M. Yoshiba, N. Otsuka, and Y. Kawahara (Eds.), High Temperature Oxidation and Corrosion 2005, Trans. Tech. Publications, Züurich, 2006.
8. P. Kofstad, High Temperature Oxidation of Metals, Wiley, New York, 1966.
9. O. Kubaschewski and B. E. Hopkins, Oxidation of Metals and Alloys, Butterworths, London, 1967.
10. S. Mrowec and T. Werber, Gas Corrosion of Metals, Foreign Scientific Publications Department of the National Center for Scientific, Technical and Economic Information, Varsovie, 1978.
11. P. Kofstad, High Temperature Corrosion, Elsevier Applied Science, London, 1988.
12. N. Birks, G. H. Meier, and F. S. Pettit, Introduction to the High Temperature Oxidation of Metals, Cambridge University Press, Cambridge, 2006.
13. E. Fromm, Kinetics of Metal-Gas Interactions at Low Temperature-Hydriding, Oxidation, Poisoning, Springer-Verlag, Berlin, 1998.
14. A. S. Khanna, High Temperature Oxidation and Corrosion, ASM International, Metals Park, OH, 2002.
15. P. Sarrazin, A. Galerie, and J. Fouletier, Mechanisms of High Temperature Corrosion: A Kinetic Approach, Trans. Tech. Publications, Züurich, 2008.
16. G. BÉeranger, J. C. Colson, and F. Dabasi, Corrosion des MatÉeriaux à Haute TempÉerature, Les ÉEditions de Physique, Les Ulis, 1987.
17. G. Y. Lai, High Temperature Corrosion and Materials Applications, ASM International, Materials Park, OH, 2007.
18. L. S. Darken and R.W. Gurry, Physical Chemistry of Metals, McGraw-Hill, New York, 1953.
19. D. R. Gaskell, Introduction to Thermodynamics of Materials, 3rd ed. Taylor and Francis, Washington, DC, 1995.
20. H. I. Aaronson (Ed.), Lectures on the Theory of Phase Transformations, Minerals, Metals and Materials Society, Warrendale, PA, 1999.
21. A. M. Arper (Ed.), Phase Diagrams, Materials Science and Technology, Vol. 1, Academic, New York, 1970.
22. J. Sticher and H. Schmalzried, Zur geometrischen Darstellung thermodynamischer Zustandsgrossen in Mehrstoffsystemen auf Eisenbasis, Report, Clausthal Institute füur Theoretischen Huttenkunde und Angewandte Physikalische Chemie der Technischen Universitüat Clausthal, 1975.
23. S. R. Shatynski, Oxid. Met., 11, 307 (1977).
24. S. R. Shatynski, Oxid. Met., 13, 105 (1979).
25. H. J. T. Ellingham, J. Soc. Chem. Ind., 63, 125 (1944).
26. M. Olette and M.F. Ancey-Moret, Rev. Metall., 60, 569 (1963).
27. F. D. Richardson and J. H. E. Jeffes, J. Iron Steel Inst., 160, 261 (1948).
28. F. D. Richardson, and J. H. E. Jeffes, J. Iron Steel Inst., 171, 165 (1957).
29. M. F. Ancey-Moret, MÉem. Sci. Rev. MÉet., 70, 429 (1973).
30. G. R. Belton andW.R.Worrell (Eds.), Heterogeneous Kinetics at Elevated Temperatures, Plenum Press, New York, 1970.
31. C. E. Wicks and F. E. Block, Bulletin 605, Bureau of Mines, U.S. Government Printing Office, Washington, DC, 1963, p. 408.
32. JANAF Thermochemical Tables, J. Phys. Chem. Ref. Data, 4, 1(1975).
33. E. A. Gulbransen and G. H. Meier, DOE Report on Contract No. DE-AC01-79-ET-13547, University of Pittsburgh, 1979.
34. C. S. Giggins and F. S. Pettit, Oxid. Met., 14, 363 (1980).
35. R. A. Rapp (Ed.), High Temperature Corrosion, NACE, Houston, TX, 1983.
36. S. A. Jansson and Z. A. Foroulis (Eds.), High Temperature Gas-Metal Reactions in Mixed Environments, American Institute of Mining Metallurgical and Petroleum Engineering, New York, 1973.
37. P. L. Hemmings and R. A. Perkins, Research Project 716-1, Interim Report, Lockheed Palo Alto Research Laboratories for Electric Power Research Institute, Palo Alto, CA, 1977.
38. A. D. Pelton and H. Schmalzried, Met. Trans., 4, 1395 (1973).
39. K. T. Jacob, D. B. Rao, and H. G. Nelson, Oxid. Met., 13, 25 (1979).
40. J. Barralis and G. Maeder, PrÉecis deMÉetallurgie: Éelaboration, structures-proprietÉes, normalisation, AFNOR-Nathan, Paris, 1997.
41. R. A. Swalin, Thermodynamics of Solids, Wiley, London, 1972.
42. H. Schick, Thermodynamics of Certain Refractory Compounds, Academic, New York, 1966.
43. O. Kubaschewski and C. B. Alcock, Metallurgical Thermochemistry, 5th ed., Pergamon, Oxford, 1979.
44. A. Yazawa, Met. Trans. B, 10B, 307 (1979).
45. P. Rocabois, C. Chatillon, and C. Bernard, J. Am. Ceram. Soc., 79, 1361 (1966).
46. F. S. Pettit, Trans. Met. Soc. AIME, 239, 1296 (1967).
47. GTT-Technologies, Herzogenroth, Germany.
48. Thermodata-I.N.P.G.-C.N.R.S., Saint Martin d'HÉeresCÉedex, France.
49. G. Eriksson, Chem Soc., 8, 100 (1975).
50. G. Eriksson and K. Hack, Met. Trans., B21, 1013(1990).
51. E.Küonigsberger and G. Eriksson, CALPHAD,19, 207 (1995).
52. W. C. Reynolds, STANJAN, Version 3, Department of Mechanical Engineering, Stanford University, 1986.
53. B. Sundman, B. Jansson, and J.-O. Andersson, CALPHAD, 9, 153 (1985).
54. C. B. Alcock and G. W. Hooper, Proc. Roy. Soc., 254A, 551 (1960).
55. D. Caplan, A. Harvey, and M. Cohen, Corr. Sci., 3, 161 (1963).
56. D. Caplan and G. I. Sproule, Oxid. Met., 9, 459 (1975).
57. D. Caplan and M. Cohen, J. Electrochem. Soc., 108, 438 (1961).
58. H. Asteman, J. E. Svensson, L. G. Johansson, and M. Norell, Oxid. Met., 52, 95 (1999).
59. C. S. Tedmon, J. Electrochem. Soc., 113, 766 (1966).
60. E. A. Gulbransen and G. H. Meier, Proc. 10th Materials Research Symposium, National Bureau of Standards Special Publications, 561, 1639 (1979).
61. E. A. Gulbransen andW. S.Wysong,TAIME, 175, 628 (1948).
62. E. A. Gulbransen K. F. Andrew, and F. A. Brassart, J. Electrochem. Soc., 110, 952 (1963).
63. C. J. Wagner, Appl. Phys., 29, 1295 (1958).
64. C. Wagner, Corros. Sci., 5, 751 (1965).
65. ASM, Handbook, Corrosion: Fundamentals, Testing and Protection, Vol. 13A,ASMInternational, Metals Park, OH, 2003.
66. K. Hauffe, Oxidation of Metals, Plenum, New York, 1965.
67. J. Benard, Oxydation des MÉetaux, Gauthier-Villars, Paris, 1962.
68. N. Cabrera and N.F. Mott, Rept. Prog. Phys., 12, 163 (1948).
69. F.W.Young, J.V. Cathcart, and A. T. Gwathmey, Acta Met., 4, 145 (1956).
70. R. K. Hart, Proc. Roy. Soc., 236A, 68 (1956).
71. M. W. Roberts, Trans. Faraday Soc., 57, 99 (1961).
72. N. F. Mott, Trans. Faraday Soc., 3, 472 (1940).
73. K. Hauffe and B. Z. Ilschner, Elektrochem., 58, 382 (1954).
74. U. R. Evans, The Corrosion and Oxidation of Metals, Edward Arnold, London, 1960.
75. F. S. Pettit and J. B. Wagner, Acta Met., 12, 35 (1964).
76. D. Monceau and B. Pieraggi, Oxid. Met., 50, 477 (1998).
77. F. A. Krüoger (Ed.), The Chemistry of Imperfect Crystals, North Holland Publishing, Amsterdam, 1975.
78. F. A. Krüoger, H. J. Vink, F. Seitz, and D. Turnbull, Solid State Physics, Vol. 3, Academic, London, 1956.
79. J. Philibert, Diffusion etTransport de Matièere dans les Solides, Monographie de Physique, Les ÉEditions de Physique, Les Ulis, 1985.
80. P. Kofstad, Non Stoichiometry, Diffusion and Electrical Conductivity in Binary Metal Oxides, Wiley, New York, 1972.
81. S. Mrowec, Defect and Diffusion in Solids, Elsevier Science Publications, London, 1980.
82. H. H. von Baumbach and C. Z.Wagner, Phys. Chem., 22, 199 (1933).
83. I. Branky and N. M. Tallan, J. Chem. Phys., 49, 1243 (1968).
84. N. G. Eror and J. B. Wagner, J. Phys. Stat. Sol., 35, 641 (1969).
85. R. Farhi and G. Petot-Ervas, J. Phys. Chem. Solids., 39, 1169 (1978).
86. M. C. Pope and N. Birks, Corr. Sci., 17, 747 (1977).
87. C. A. C. Sequeira and D. M. F. Santos, Czech J. Phys., 56, 549 (2006).
88. A. Atkinson, R. I. Taylor, and A. E. Hughes, Phil. Mag., A45, 823 (1982).
89. A. Atkinson, D. P. Moon, D. W. Smart, and R.I. Taylor, J. Mater. Sci., 21, 1747 (1986).
90. R. J. Hussey and M. J. Graham, Oxid. Met., 45, 349 (1996).
91. R. Prescott and M. J. Graham, Oxid. Met., 38, 233 (1992).
92. M. I. Manning, Corros. Sci., 21, 301 (1981).
93. N. B. Pilling and R. E. Bedworth, J. Inst. Met., 1, 529 (1923).
94. J. V. Cathcart (Ed.), Stress Effects and the Oxidation of Metals, TMS-AIME, New York, 1975.
95. M. Schüutze, Protective Oxide Scales and Their Breakdown, The Institute of Corrosion, Wiley, Chichester, UK, 1997.
96. M. Schulte and M. Schüutze, Oxid. Met., 51, 55 (1999).
97. J. Armilt, D.R. Holmes, M.I. Manning, D.B. Meadowcroft, and E. Metcalfe, EPRI Report No. FP 686, Electric Power Research Institute, Palo Alto, CA, 1978.
98. W. Christl, A. Rahmel, and M. Schüutze, Oxid. Met., 31, 1 (1989).
99. H. E. Evans, Int. Mater. Rev., 40, 1 (1995).
100. F. S. Pettit, R. Yinger and J. B. Wagner, Acta Met., 8, 617 (1960).
101. J. C. Yang, M. Yeadon, B. Kolasa, and J. M. Gibson, Scripta Mater., 38, 1237 (1998).
102. J. Romanski, Corros. Sci., 8, 67, 89 (1968).
103. P. Barret (Ed.), Reaction Kinetics in Heterogeneous Chemical Systems, Elsevier, Amsterdam, 1975.
104. S. Mrowec and A. Stoklosa, Oxid. Met., 3, 291 (1971).
105. S. Glasstone, K. J. Laidler, and H. Eyring, Theory of Rate Process, McGraw-Hill, New York, 1941.
106. I. Langmuir, J. Am. Chem. Soc., 40, 1361 (1918).
107. S. Brunauer, P. H. Emmett, and E. Teller, J. Am. Chem. Soc., 60, 309 (1938).
108. C. Wagner, Z. Phys. Chem. Abt., B21, 25 (1933).
109. C. Wagner, Z. Elektrochem., 39, 543 (1933).
110. M. J. Graham, D. Caplan, and M. Cohen, J. Electrochem. Soc., 119, 1265 (1972).
111. K. Hauffe, Oxydation von Metallen und Metallegiesungen, Springer, Berlin, 1957.
112. P. Kofstad, Corros. NACE, 24, 379 (1968).
113. P. Gesmundo and F. Viani, J. Electrochem. Soc., 128, 470 (1981).
114. B. E. Deal and A.S. Grove, J. Appl. Phys., 36, 3770 (1965).
115. U. R. Evans, Trans. Electrochem. Soc., 46, 247 (1924).
116. K. Fischbeck, Z. Elektrochem., 39, 316 (1933).
117. C.Wagner, in Atom Movements, ASM, Cleveland, OH, 1951, P. 153.
118. C. Wagner, Prog. Solid State Chem., 10, 3 (1975).
119. A. Rahmel andW. Schwenk, Korrosion und Korrosionsschutz von Stahlen, Verlag Chemie, Weinheim, 1977.
120. E. Heitz, R. Henkhaus, and A. Rahmel, Corrosion Science- an Experimental Approach, Ellis Horwood, New York, 1992.
121. P. Sarrazin and J. Besson, J. Chim. Phys., 1, 27 (1973).
122. B. Fischer and D. S. Tannhüauser, J. Chem. Phys., 44, 1663 (1966).
123. N. G. Eror and J. B.Wagner, J. Phys. Chem. Solids., 29, 1597 (1968).
124. R. E. Carter and F. D. Richardson, TAIME, 203, 336 (1955).
125. D. W. Bridges, J. P. Baur, and W. M. Fassell, J. Electrochem. Soc., 103, 619 (1956).
126. S. Mrowec, A. Stoklosa, and K. Godlewski, Cryst. Latt. Def., 5, 239 (1974).
127. S. Mrowec and K. Przybylski, Oxid. Met., 11, 365 (1977).
128. S. Mrowec and K. Przybylski, Oxid. Met., 11, 383 (1977).
129. R.E. Carter and F.D. Richardson, J. Met., 6, 1244 (1954).
130. D. Caplan, M.J. Graham, and M. Cohen. J. Electrochem. Soc., 119, 1205 (1972).
131. J.E. Burke, Trans. AIME, 180, 73 (1949).
132. N.N. Khoi, W.W. Smeltzer, and J.D. Embury, J. Electrochem Soc., 116, 1495 (1975).
133. G.J. Yurek, J.P. Hirth, and R.A. Rapp, Oxid. Met., 8, 265 (1974).
134. G. Garnaud, Oxid. Met., 11, 127 (1977).
135. G. Garnaud and R.A. Rapp, Oxid. Met., 11, 193 (1977).
136. H. S. Hsu and G. J. Yurek, Oxid. Met., 17, 55 (1982).
137. J. Loriers, Comptes Rendus Acad. Sci., 231, 522 (2006).
138. G. W. Haycock, J. Electrochem. Soc., 106, 771 (1959).
139. R. A. Rapp and H. Colson, Trans. Met. Soc. AIME, 236, 1616 (1966).
140. R. A. Rapp and G. Goldberg, Trans. Met. Soc. AIME, 236, 1619 (1966).
141. S. L. Chang, F. S. Pettit, and N. Birks, Oxid. Met., 34, 23 (1990).
142. J. Stringer, Acta Metall., 8, 758 (1960).
143. J. Stringer, Acta Metall., 8, 810 (1960).
144. S. B. Newcomb and M. J. Bennett, (Eds.), Microscopy of Oxidation, Vol. 2, Institute of Materials, London, 1993.
145. J. A. Roberson and R. A. Rapp, TAIME, 239, 1327 (1967).
146. Z. A. Munir and D. Cubicciotti (Eds.), High Temperature Materials, Chemistry, Electrochemical Society, New York, 1983.
147. F. Gesmundo and Y. Niu, Oxid. Met., 50, 1 (1998).
148. H. J. Grabke and D. B. Meadowcroft (Eds.), Guidelines for Methods of Testing and Research in High Temperature Corrosion, Institute of Materials, London, 1995.
149. C. Wagner, Bur. Bunsenges. Phys. Chem., 63, 772 (1959).
150. J. L. Smialek and G. M. Meier,in High Temperature Oxidation in Superalloy, Vol. 2, C. T. Sims, N. S. Stoloff, and W. C. Hagel, (Eds.), Wiley, New York, 1987, p. 293.
151. K. M. N. Prasanna, A. S. Khanna, R. Chandra, and W. J. Quadakkers, Oxid. Met., 46, 465 (1996).
152. C. A. Barrett and C. E. Lowell, Oxid. Met., 11, 199 (1977).
153. C. S. Giggins and F. S. Pettit, J. Electrochem. Soc., 118, 1782 (1971).
154. H. Hindam and D. P. Whittle, Oxid. Met., 18, 245 (1982).
155. A. S. Tumarev and L. A. Panyushin, NASA TT F-13221, 1970.
156. G. R. Wallwork and A. Z. Hed, Oxid. Met., 3, 171 (1971).
157. W. Brandl, H. J. Grabke, D. Toma, and J. Kruger, Surf. Coat. Technol., 68/69, 17 (1994).
158. C. Sarioglu, M.J. Stiger, J.R. Blachere, R. Janakiram, E. Schumann, A. Ashary, F.S. Pettit, and G.H. Meier, Mater. Corros., 51, 358 (2000).
159. J. Nicholls (Ed.), High Temperature Surface Engineering, Institute of Materials, London, 1999.
160. H. G. Jung and K. Y. Kim, Oxid. Met., 49, 403 (1998).
161. A. Mignone, S. Frangini, A. La Barbera, and O. Tassa, Corros. Sci., 40, 1331 (1998).
162. B. A. Pint, J. Leibowitz, and J. H. Devan, Oxid. Met., 51, 183 (1999).
163. C. A. C. Sequeira and C. M. E. S. Nunes, Surf. Eng., 3, 161 (1987).
164. C. A. C. Sequeira, A. M. G. Pacheco, and C. M. E. S. Nunes, Surf. Eng., 3, 247 (1987).
165. C. A. C. Sequeira, A. M. G. Pacheco, and C. M. E. S. Nunes, Surf. Eng., 4, 65 (1988).
166. G. Allison and M. K. Hawkins, GEC Rev., 17, 947 (1914).
167. R. Drewett, Corros. Sci., 9, 823 (1969).
168. Y. Chen, C. A. C. Sequeira, and X. Song, Corros. Prot. Mater., 24, 52 (2005).
169. M. Brill-Edwards and M. Epner, Electrochem. Technol., 6, 299 (1968).
170. E. Lang (Ed.), The Role of Active Elements in the Oxidation Behaviour of High Temperature Metals and Alloys, Elsevier, Amsterdam, 1989.
171. E. Mevrel and R. Pichoir, Mater. Sci. Eng., 88, 1 (1987).
172. G. V. Samsonov (Ed.), Protective Coatings on Metals, Vol. 5. Consultants Bureau, New York, 1973.
173. R. Sivakumar and E. J. Rao, Oxid. Met., 17, 391 (1982).
174. C. A. C. Sequeira and F.D.S. Marquis, Mater. Sci. Forum., 514-516, 505 (2006).
175. P. Lane and N. M. Geyer, J. Met., 18, 186 (1966).
176. R. G. Ubank, Rev. Int. Htes. Temp. Refr., 14, 21 (1977).
177. R. G. Wing and I. R. McGill, Pt. Met. Rev., 25, 94 (1981).
178. B. E. Jacobson and R. E. Bunshah (Eds.), Films and Coatings for Technology, CEI Course, Stockholm, Sweden, 1981.
179. W. Gao (Ed.), Developments in High Temperature Corrosion and Protection of Materials, Woodhead Publ., Cambridge, UK, 2008.
180. M. Schüutze andW. J. Quadakkers (Ed.), Novel Approaches to Improving High Temperature Corrosion Resistance, Woodhead Publ., Cambridge, UK, 2008.
181. M. G. Hocking, V. Vasantasree, and P. S. Sidky, Metallic and Ceramic Coatings: Production, High Temperature Properties and Applications, Longman Sci.& Technical, Essex, UK, 1989.
182. J. T. De Masi-Marcin and D. K. Gupta, Surf. Coat. Tech., 68-69, 1 (1994).
183. S. Bose, High Temperature Coatings, Elsevier, Amsterdam, 2007.
184. Y. Sato, B. Onay, and T. Maruyama (Eds.), High Temperature Corrosion of Advanced Materials and Protective Coatings, Elsevier, Amsterdam, 1992.
185. K. H. Stern, Metallurgical and Ceramic Protective Coatings, Chapman and Hall, London, 1996.
186. N. B. Dahotre and J. Hampikian (Eds.), Elevated Temperature Coatings: Science and Technology, Vol. 3, TMS, San Diego, 1999.
187. R. C. John, Corrosion/99, Paper No. 73, NACE International, Houston, TX, 1999.
188. A.W. Zeuthen, Heating, Piping and Air Conditioning, 42, 152 (1970).
189. H. E. McGarrow (Ed.), The Making, Shaping and Treating of Steel, United States Steel Corp., Pittsburgh, PA, 1971.
190. I. G. Wright, in Corrosion Metals Handbook, Vol. 13, ASM International, Metals Park, OH, 1987, p. 97.
191. A. Grodner, Weld. Res. Counc. Bull. No. 31, 1956.
192. M. Walter, M. Schüutze, and A. Rahmel, Oxid. Met., 39, 389 (1993).
193. O. D. Sherby, Acta Metall., 10, 135 (1962).
194. A. Moccari and S. I. Ali, Brit. Corros. J., 14, 91 (1979).
195. S. Kado, T. Yamazaki, M. Yamazaki, K. Yoshida, K. Yabe, and H. Kobayashi, Trans. Iron Steel Inst. Jpn., 18, 387 (1978).
196. W. E. Ruther and S. Grunberg, J. Electrochem. Soc., 111, 1116 (1964).
197. Kanthal Alloys Data Sheet, Sandvik, Sweden, 1995.
198. R. Berglund and B. Jonsson, Ind. Heat, Oct., 21 (1989).
199. Allegheny LudlumData Sheet, Allegheny Ludlum, Pittsburgh, PA, 1990.
200. P. T. Moseley, K. R. Hyde, B. A. Bellamy, and G. Tappin,Corros. Sci., 24, 547 (1984).
201. F. N. Smith, J. F. McGurn, G. Y. Lai, and V. S. Sastri (Eds.), Applications and Materials Performance, Proc. Nickel-Cobalt 97 International Symposium, The Metallurgical Society of CIM, Montreal, Canada, 1997.
202. P. Ganesan, G. D. Smith, and C. S. Tassen, Corrosion/93, Paper No. 234, NACE International, Houston, Texas, 1993.
203. G. Y. Lai, J. Met., 37, 14 (1985).
204. C. E. Lowell, D. L. Deadmore, and J. D. Whittenberger, Oxid. Met., 17, 205 (1982).
205. G.Y. Lai, unpublished results, Haynes International,Kokomo, Indiana, 1988.
206. M. Schüutze (Ed.), Corrosion and Environmental Degradation, Wiley-VCM, Weinheim, Germany, 2000.
207. B. Hicks, Mater. Sci. Technol., 3, 772 (1987).
208. B. Gleeson and M. A. Harper, Oxid. Met., 49, 373 (1998).
209. H. E. Evans, D. A. Hilton, R. A. Holm, and S. J.Webster, Oxid. Met., 14, 235 (1980).
210. W. J. Quadakkers and K. Bongartz, Werkst. Korros., 45, 232 (1994).
211. I. Gurrappa, S. Weinruch, D. Naumenko, and W. J. Quadakkers, Mater. Corros., 51, 224 (2000).
212. W. J. Quadakkers, Werkst. Korros., 41, 659 (1990).
213. J. Klower and J. G. Li, Mater. Corros., 47, 545 (1996).
214. J. G. Smeggil, A.W. Funkenbusch, and N. S. Bornstein, High Temp. Sci., 16, 163 (1985).
215. A.W. Funkenbusch, J. G. Smeggil, and N. S. Bornstein, Met.Trans. A, 16, 1164 (1985).
216. J. G. Smeggil, A.W. Funkenbusch, and N.S. Bornstein, Met.Trans. A, 17, 923 (1986).
217. J. G. Smeggil, Mater. Sci. Eng., 87, 261 (1987).
218. P. Y. Hou and J. Stringer, Oxid. Met., 38, 323 (1992).
219. P. Y. Hou, Mater. Corros., 51, 329 (2000).
220. N. J. Simms, R. Newton, J. F. Norton, A. Encinas-Oropesa, J. E. Oakey, J. R. Nicholls, and J.Wilber, Mater. High. Temp., 20, 439 (2003).
221. J. Klower, Mater. Corros., 49, 758 (1998).
222. B. A. Pint, J. Eng. Gas Turbines Power, 128, 1 (2006).
223. C. W. Tuck, M. Odgers, and K. Sachs, Anti-Corrosion, June 1966, p. 14.
224. K. Segerdahl, J. E. Svensson, and L. G. Johansson, Mater. Corros., 53, 247 (2002).
225. K. Segerdahl, J. E. Svensson, and L. G. Johansson, Mater. Corros., 53, 479 (2002).
226. K. Onal, M. C. Maris-Sida, G. H. Meier, and F. S. Pettit, Mater. High Temp., 20, 327 (2003).
227. A. Rahmel (Ed.), Aufbau von Oxidschichten auf Hochtemperaturwerkstoffen und ihre technische Bedeutung, Deutsche Gesellschaft füur Metallkunde, Oberusel, 1982.
228. J. K. Meijering and G.W. Rathenau, Nature, 165, 240 (1950).
229. S. S. Brennor, J. Electrochem. Soc., 102, 16 (1955).
230. J. W. Sawyer, Trans. TMS-AIME., 221, 63 (1961).
231. A. de SBrasunas and N. J. Grant, Trans.ASM, 44, 1133 (1950).
232. C. A. C. Sequeira (Ed.), High Temperature Corrosion in Molten Salts, Trans. Tech. Publications, Uetikon-Züurich, 2003.