Bioactive titanium surfaces

Titanium Alloys: Preparation, Properties and Applications

Volumn , Issue , 2010, Pages 269-293

  Spriano, S ^a   Ferraris, S ^a   Bianchi, C L ^b   Cassinelli, C ^c   Torricelli, P ^d   Fini, M ^d   Rimondini, L ^e   Giardino, R ^f  

^a POLITECNICO DI TORINO   (Italy)

^b UNIVERSITY OF MILAN   (Italy)

^c Nobil Bio Ricerche Srl   (Italy)

^d RIZZOLI ORTHOPAEDIC INSTITUTE   (Italy)

^e UNIVERSITY OF EASTERN PIEDMONT   (Italy)

^f UNIVERSITY OF BOLOGNA   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 79958148525     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (70)

1. Puleo, DA.; Nanci, A. (1999). Understanding and controlling the bone-implant interface. Biomaterials, 20, 2311-2321
2. Kokubo T; Kim HM; Kawashita M. (2003). Novel bioactive materials with different mechanical properties. Biomaterials, 24, 2161-2175
3. Rammelt S; Illert T; Bierbaum S; Scharnweber D; Zwipp H; Schneiders W. (2006). Coating of titanium implants with collagen, RGD peptide and chondroitin sulfate. Biomaterials, 27, 5561-5571
4. Xiao, S-J; Kenausis, G; Textor, M. Biochemical modification of titanium surfaces. In Springler, Titanium in Medicine - Chapter 13, Springler; 2001; 417-453
5. De Jonge, L. T; Leeuwenburgh, S. C. G; Wolke, J. G. C; Jansen, J. A. Organic-Inorganic Surface Modifications for Titanium Implant Surfaces Pharm Res, 2008, 25,10, 2357-2369
6. Rizzi, G; Scrivani, A; Fini, M; Giardino, R Biomedical coatings to improve the tissuebiomaterial interface. Int J Artif Organs, 2004, 27, 649-657
7. Renghini, C; Girardin, E; Fomin, A.S; Manescu, A; Sabbioni, A; Barinov, S.M; Komlev, V.S; Albertini, G; Fiori, F Plasma sprayed hydroxyapatite coatings from nanostructured granules, Mater Sci Eng B 152 (2008) 86-90
8. Lee, T.M; Chang, E; Wang, B.C; Yang, C.Y. Characteristics of plasma-sprayed bioactive glass coatings on Ti6Al4V alloy: an in vitro study. Surf Coat Technol, 1996, 79, 170-177
9. Vernè, E; Bona, E; Angelini, E; Rosalbino, F; Appendino, P; Correlation between microstructure and properties of biocompatible coatings. J Eur Ceram Soc, 2002, 22, 2315-2323
10. Miola, M; Ferraris, S; Di Nunzio, S; Robotti, P; Bianchi, G; Fucale, G; Maina, G; Cannas, M; Gatti, S; Masse, A; Vitale-Brovarone, C; Vernè, E; Surface Silver-doping of biocompatible glasses to induce antibacterial properties. Part II: plasma sprayed glass coatings, J Mater Sci. Mater Med, 2009, 20, 741-749
11. Verné, E; Ferraris, S; Miola, M; Fucale, G; Maina, G; Robotti, P; Bianchi, G; Martinasso, G; Canuto, RA; Vitale Brovarone, C Synthesis and characterization of a bioactive and antibacterial glass-ceramic (II): Plasma Spray coatings on metallic substrates, Adv Appl Cer, 2008, 107, 1743-6753
12. Szmukler-Moncler, S; Perrin, D; Piattelli, A; Scarano, A Evaluation of a soluble calcium phosphate coating obtained by electrochemical deposition: A pilot study in the pig maxillae. In Biological Mechanism of Tooth Eruption, Resorption and Replacement by Implants, Z. Davidovitch and J. Mah, 1998, 481-485
13. Neumann, H-G; Beck, U; Drawe, M; Steinbach, J; Multilayers systems for corrosion protection of stainless steel implants. Surf Coat Technol, 1998, 98, 1157 - 1161
14. Zeggel, P. Bioactive calcium phosphate coatings for dental implants. International magazine of oral implantology, 2000, 1, 52-57
15. Szmukler-Moncler, S; Perrin, D; Ahossi, V; Pointaire, Ph Evaluation of BONIT®, a fully resorbable CaP coating obtained by electrochemical deposition, after 6 weeks of healing: a pilot study in the pig maxilla. Key Eng Mater, 2001, 192-195, 395-398
16. Yang, Y; Kim, K-H; Ong, J.L. A review on calcium phosphate coatings produced using a sputtering process - an alternative to plasma sprayng. Biomaterials, 2005, 26,327-337
17. Leeuwenburg, S.G.C; Heine, M.C; Wolke, J.C.G; Pratsinis, S.E; Schoonman, J; Jansen J.A Morphology of calcium phosphate coatings for biomedical applications deposited using Electrostatic Spray Deposition. Thin Solid Films, 2006, 503, 69-78
18. Arias, J.L; Mayior, M.B; Pou, J; Leng, Y; Leon, B; Perez-Amor, M. Micro- and nanotesting of calcium phosphate coatings produced by pulsed laser deposition. Biomaterials, 2003, 24, 3403-3408
19. Hashimoto, Y, Kawashima, M; Hatanaka, R; Kusunoki, M; Nishikawa, H; Hontsu, S; Nakamura, M. Cytocompatibility of calcium phosphate coatings deposited by an ArF pulsed laser. J Mater Sci: Mater Med, 2008, 19, 327-333
20. Wang, D; Chen, C; He, T; Lei, T. Hydroxyapatite coating on Ti6Al4V alloy by a solgel method. J Mater Sci: Mater Med, 2008, 19, 2281-2286
21. Stoch, A; Jastrzebski, W; Dlugon, E; Lejda, W; Trybalska, B; Stoch, G.J; Adamczyk, A. Sol-gel derived hydroxyapatite coatings on titanium and its alloy Ti6Al4V. J Mol Struct, 2005, 744-747, 633-640
22. Wang, X.X; Yan, W; Hayakawa S;, Tsuru, K; Osaka, A. Apatite deposition on thermally and anodically oxidized titanium surfaces in a simulated body fluid. Biomaterials, 2003, 24 4631-4637
23. Forsgren, J; Svahn, F; Jarmar, T; Engqvist, H. Formation and adhesion of biomimetic hydroxyapatite deposited on titanium substrates. Acta Biomater, 2007, 3, 980-984
24. Mao, C; Li, H; Cui, F; Ma, C; Feng, Q Oriented growth of phosphates on polycrystalline titanium in a process mimickling biomineralization. J Cryst Growth, 1999, 206, 308-321.
25. Lausmaa, J. Mechanical, thermal, chemical and electrochemical surface treatment of titanium. Springler, Titanium in Medicine - Chapter 8, Springler; 2001; 231-266
26. Kokubo, T Formation of biologically active bone-like apatite on metals and polymers by a biomimetic process. Thermochimica Acta 280/281 (1996) 479-490
27. Nishiguchi, S; Nakamura, T; Kobayashi, M; Kim, H-Min; Miyaji, F; Kokubo, T The effect of heat treatment on bone-bonding ability of alkali-treated titanium. Biomaterials, 1999, 20, 491-500
28. Kokubo, T; Matsushita, T; Takadama, H Titania-based bioactive materials. J Eur Ceram Soc, 2007, 27, 1553-1558
29. Kokubo, T. Apatite formation on surfaces of ceramics metals and polymers in body environment. Acta Mater, 1998, 46, 7, 2519-2527
30. Fawzy, A.S; Amer, M.A. An in vitro and in vivo evaluation of bioactive titanium implants following sodium removal treatment. Dent Mater, 2009, 25, 48-57
31. Spriano, S; Bosetti, M;.Bronzoni, M; Vernè, E; Maina, G;.Bergo, V; Cannas, M Surface properties and cell response of low metal ion release Ti-6Al-7Nb alloy after multi-step chemical and thermal treatments. Biomaterials, 2005, 26, 1219-1229
32. Spriano, S; Bronzoni, M; Vernè, E; Maina, G; Bergo, V; Windler, M Characterization of surface modified Ti-6Al-7Nb alloy. J Mater Sci Mat Med, 2005, 16, 1-12
33. Wang, X-X; Hayakawa, S; Tsuru, K; Osaka, A Bioactive titania gel layers formed by chemical treatment of Ti substrate with H2O2/HCl solution. Biomaterials, 2002, 23, 1353-1357
34. Kaneko, S; Tsuru, K; Hayakawa, S; Takemoto, S; Ohtsuki, C; Ozaki, T; Inoue, H; Osaka, A. In vivo evaluation of bone-bonding of titanium metal chemically treated with hydrogen peroxide solution containing tantalum chloride. Biomaterials, 2001, 22, 875-881
35. Xiao, F; Tsuru, K; Hayakawa, S; Osaka, A. Low temperature synthesis of bioactive TiO2 thin film by two step treatment. In Bioceramics 15 Trans. Tech. Publishers, 2002, 533-536
36. K.Shibata, K.Tsuru, S.Hayakawa, A.Osaka Biomimetic apatite deposition on titanium substrates treated with low concentrations H2O2 solutions In Bioceramics 15 Trans. Tech. Publishers, 2002, 55-58
37. Wu, J-M; Hayakawa, S; Tsuru, K; Osaka, A. Low temperature deposition of bioactive crystalline titania films: effects of tantalum. In Bioceramics 15 Trans. Tech. Publishers, 2002, 537-540
38. Kawasaki, S; Tsuru, K; Hayakawa, S; Osaka, A. Control of morphology of titania film with high apatite forming ability derived from chemical treatments of titanium with hydrogen peroxide. In Bioceramics 16 Trans. Tech. Publishers, 2003, 443-446
39. Wu, J-M; Hayakawa, S; Tsuru, K; Osaka, A. Porous titania films prepared from interactions of titanium with hydrogen peroxide solution. Scripta Mater, 2002, 46, 101-106
40. Wang, X-X, Hayakawa, S; Tsuru, K; Osaka, A A comparative study of in vitro apatite deposition on heat, H2O2, and NaOH treated titanium surfaces. J Biomed Mater Res, 2001, 54, 172-178
41. Wang, X-X; Hayakawa, S; Tsuru, K; Osaka, A Improvement of bioactivity of H2O2/TaCl5-treated titanium after subsequent heat treatments. J Biomed Mater Res, 2000, 52: 171-176
42. Chiesa, R; Giavaresi, G; Fini, M; Mandrini, E; Giordano, C; Bianchi, A; Giardino, R In vitro and in vivo performance of a novel surface treatment to enhance osseointegration of endosseous implants. Oral Surg Oral Med oral Pathos oral Endol 2007, 103: 745-46
43. Sandrini, E; Chiesa, R; Rondelli, G; Santin, M; Cigada, A A novel biomimetic treatment for a n improved osteointegration of titanium. JABB 2003, 1, 33-42
44. Giordano, C; Sandrini, E; Del Curto, B; Signirelli, E; Rondelli, G; Di Silvio, L Titanium for osteointegration: Comparison between a novel biomimetic treatment and commercially exploited surfaces, JABB 2004, 2, 35-44
45. Aita, H; Hori, N; Takeuchi, M; Yamada, M; Anpo, M; Ogawa, T The effect of ultraviolet functionalization of titanium on integration with bone. Biomaterials, 2009, 30, 1015-1025
46. Hildebrand, H.F; Blanchemain, N; Mayer, G; Chai, F; Lefebvre, M; Boschin, F Surface coatings for biological activation and functionalization of medical devices. Surf Coat Tech, 2006, 200, 6318-6324
47. Morra, M Biochemical modification of titanium surfaces: peptides and ECM proteins. Eur Cell Mater, 2006, 1, 12, 1-5
48. Lee, S-H; Shin, H. Matrices and scaffolds for delivery of bioactive molecules in bone and tissue engineering. Adv Drug Del Rev, 2007, 59, 339-359
49. Bagno, A; Piovan, A; Dettin, M; Chiarion, A; Brun, P; Gambaretto, R; Fontana, G; Di Bello, C; Palù, G; Castagliuolo, I. Human hosteoblas-like cell adhesion on titanium substrates covalently functionalized with synthetic peptides. Bone 2007; 40, 693-699
50. Nanci, A; Wuest, J.D; Peru, L; Sharma, V; Zalzal, S; McKee, M.D. Chemical modification of titanium surfaces for covalent attachemnt of biological molecules J Biomed Mater Res, 1998, 40, 324-335
51. Hayakawa, T; Yoshinari, M; Nemoto, K Direct attachment of fibronectin to tresyl chloride-activated titanium. J Biomed Mater ResA, 2003, 67, 684-688
52. Hayakawa, T; Nagai, M; Yoshinari, M; Makimura, M; Nemoto, K. Cell-adhesive protein immobilization using tresyl chloride-activation technique for the enhancement of initial cell attachment. J Oral Tissue Engin 2004, 2, 14-24
53. Morra, M; Cassinelli, C; Cascando, G; Cahalan, P; Cahalan, L; Fini, M; Giardino, R. Surface engineering of titanium by collagen immobilization. Surface characterization and in vitro and in vivo studies. Biomaterials, 2003, 24, 4639-4654
54. Morra, M; Cassinelli, C; Carpi, A; Giardino, R; Fini, M. Effects of molecular weight and surface functionalization on surface composition and cell adhesion to hyaluronan coated titanium. Biomed Pharmacother, 2006, 60, 365-369
55. De Jonge L.T; Leeuwenburg, S.C.G; van den Beuken, J.J.J.P; Wolke, J.G.C; Jansen, J.A. Electrosprayed enzyme coatings as bioinspired alternatives to bioceramic coatings for orthopaedic and dental implants. Adv Func Mater 2009, 79, 1-8
56. Piattelli, A; Scarano, A; Corigliano, M; Piattelli, M. Effects of alcaline phosphatase on bone healing around plasma-sprayed titanium implants: a pilot study in rabbits. Biomaterials, 1996, 17, 1443-1449
57. Spriano S; Vernè E; Ferraris S. Multifunctional titanium surfaces for bone integration. Patent Application TO2007A000719
58. Ocal C; Ferrer S. Low temperature diffusion of Pt and Au atoms through thin TiO2 films on a Ti substrate. (1987). Surface Science, 191, 147-156
59. Maitz MF; Poon RWY; Liu XY; Pham MT; Chu P K. (2005). Bioactivity of titanium following sodium plasma immersion ion implantation and deposition. Biomaterials, 26, 5465-5473
60. Kim HM; Miyaji F; Kokubo T; Nakamura T. (1996). Preparation of bioactive Ti and its alloys via simple chemical surface treatment. Journal of Biomedical Materials Research, 32, 409-417
61. Sul YT; Johansson C; Byon E; Albrektsson T. (2005). The bone response of oxidized bioactive and non-bioactive titanium implants. Biomaterials, 26, 6720-6730
62. Silva MAM; Martinelli AE; Alves Jr C; Nascimento RM; Távora MP; Vilar CD. (2006). Surface modification of Ti implants by plasma oxidation in hollow cathode discharge. Surface Coating Technology, 200, 2618- 2626
63. Kokubo T; Takadama H. (2006). How useful is SBF in predicting in vivo bone bioactivity? Biomaterials, 27, 2907-2915
64. Aubin JE; Liu F; Malaval L; Gupta AK. (1995). Osteoblast and chondroblast differentiation. Bone, 17, 77S-83S.
65. Malaval L; Liu F; Roche P; Aubin JE. (1999). Kinetics of osteoprogenitor proliferation and osteoblast differentiation in vitro. Journal of Cell Biochemistry, 74, 616-27.
66. Atsushi E; Korenori O; Satoshi I; Shigeyuki E; Takayoshi N; Yukichi U. (2003). Effects of -TCP and TetCP on MC3T3-E1 proliferation, differentiation and mineralization. Biomaterials, 24, 831-836.
67. Franceschi RT; Iyer BS. Relationship between collagen synthesis and expression of the osteoblast phenotype in MC3T3-E1 cells. (1992). Journal of Bone and Mineral Research, 7, 235-246.
68. Cowles EA; DeRome D; Pastizzo G; Brailey LL; Gronowicz GA. (1998). Mineralization and the expression of matrix proteins during in vivo bone development. Calcified Tissue International, 62, 74-82.
69. Fini M; Giardino R; Borsari V; Torricelli P; Rimondini L; Giavaresi G; Nicoli Aldini N. (2003). In vitro behaviour of osteoblasts cultured on orthopaedic biomaterials with different surface roughness, uncoated and fluorohydroxyapatite-coated, relative to the in vivo osteointegration rate. International Journal of Artificial Organs, 26, 520-528.
70. Mayr-Wohlfart U; Fiedler J; Gunther KP; Puhl W; Kessler S. (2001). Proliferation and differentiation rates of a human osteoblast-like cell line (SaOS-2) in contact with different bone substitute materials. Journal of Biomedical Materials Research, 57, 132-139.