Designing the fiber volume ratio in SiC fiber-reinforced SiC ceramic composites under Hertzian stress

Materials and Design

Volumn 32, Issue 8-9, 2011, Pages 4394-4401

  Lee, Kee Sung ^a   Jang, Kyung Soon ^a   Park, Jae Hong ^a   Kim, Tae Woo ^a   Han, In Sub ^b   Woo, Sang Kuk ^b  

^a Kookmin University   (South Korea)

^b Korea Institute of Energy Research (KIER)   (South Korea)

Author keywords

A. Ceramic matrix composites; B. fibers and filaments; E. Mechanical

Indexed keywords

A. CERAMIC MATRIX COMPOSITES; B. FIBERS AND FILAMENTS; COATING LAYER; COATING MATERIAL; CONTACT STRESS; DAMAGE MODES; E. MECHANICAL; EXPERIMENTAL STUDIES; FIBER TYPES; FIBER VOLUME; FINITE ELEMENT METHOD ANALYSIS; FLEXURAL STRESS; HERTZIAN INDENTATION; HERTZIAN STRESS; LOAD DISPLACEMENTS; MATRIX; MECHANICAL BEHAVIOR; MECHANICAL CHARACTERIZATIONS; RADIAL CRACKS; RADIAL DIRECTION; SIC CERAMICS; SIC FIBERS; STACKING SEQUENCE; WOVEN FIBER MAT; WOVEN FIBERS;

BORON; CERAMIC MATERIALS; CERAMIC MATRIX COMPOSITES; COATINGS; FINITE ELEMENT METHOD; MATRIX ALGEBRA; NANOFILTRATION MEMBRANES; NITRIDES; PLATING; SILICON CARBIDE; WEAVING;

FIBERS;

EID: 79957840265     PISSN: 02641275     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2011.03.080     Document Type: Article

References (30)

1. Schioler L.J. Heat engine ceramics. Am Ceram Soc Bull 1986, 64(2):268-294.
2. Kagawa Y. Thermal shock damage in a two-dimensional SiC/SiC composite reinforced with woven SiC fibers. Compos Sci Technol 1997, 57(5):607-611.
3. Jacobson N.S. Corrosion of silicon-based ceramics in combustion environments. J Am Ceram Soc 1993, 75:3-28.
4. Quemard L., Rebilat F., Guette A., Tawil H., Louchet-Pouillerie C. Degradation mechanism of a SiC fiber reinforced self-sealing matrix composite in simulated combustor environments. J Eur Ceram Soc 2007, 27(1):377-388.
5. Lee S.M., Kim T.W., Lim H.J., Kim C., Kim Y.W., Lee K.S. Mechanical properties and contact damages of nanostructured silicon carbide ceramics. J Ceram Soc Jpn 2007, 115(5):304-309.
6. Ryu R.H., Lee K.S., Kim Y.W. Indentation and contact damages on grain boundary controlled silicon carbide ceramics. J Mater Sci 2009, 44:1416-1420.
7. Ishikawa T. Recent developments of the SiC fiber Nicalon and its composites, including properties of the SiC fiber Hi-Nicalon for ultra-high temperature. Compos Sci Technol 1994, 51(2):135-144.
8. Otsuka A., Matsumura Y., Hosono K., Tanaka R. Long term oxidation of a SiC fiber-bonded composite in air at 1500 °C. J Eur Ceram Soc 2003, 23(16):3125-3134.
9. Naslain R. Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors an overview. Compos Sci and Technol 2004, 64(2):155-170.
10. Guo S., Kagawa Y. Tensile fracture behavior of continuous SiC fiber-reinforced SiC matrix composites at elevated temperatures and correlation to in situ constituent properties. J Eur Ceram Soc 2002, 22(13):2349-2356.
11. Goto K., Kagawa Y. Fracture behavior and toughness of a plane-woven SiC fiber-reinforced SiC matrix composite. Mater Sci Eng A 1996, 211(1-2):72-81.
12. Dong S., Katoh Y., Kohyama A. Processing optimization and mechanical evaluation of hot pressed 2D Tyranno-SA/SiC composites. J Eur Ceram Soc 2003, 23(8):1223-1231.
13. Tanaka T., Tamari N., Kondo I., Iwasa M. Fabrication of three-dimensional tyranno fibre reinforced SiC composite by the polymer precursor method. Ceram Int 1998, 24(5):365-370.
14. Kim W.J., Kang S.M., Park J.Y., Ryu W.S. Effect of a SiC whisker formation on the densification of Tyranno SA/SiC composites fabricated by the CVI process. Fusion Eng Des 2006, 81(8-14):931-936.
15. f reinforced SiC composites with fiber coating-Stress alleviation in SiC fiber by soft coating layer. J Ceram Soc Jpn 2009, 117(5):582-587.
16. Freitag DW, Richerson DW. Opportunities for advanced ceramics to meet the needs of the industries of the future. USA: DOE/ORO 2060; 1998.
17. Jones R.H., Snead L.L., Kohyama A., Fenici P. Recent advances in the development of SiC/SiC as a fusion structural material. Fusion Eng Design 1998, 41(1-4):15-24.
18. Krenkel W. Ceramic matrix composites-fiber reinforced ceramics and their applications 2008, Wiley-VCH Verlag GmBH & Co., Germany.
19. Gundel D.B., Taylor P.J., Wawner F.E. Fabrication of thin oxide coatings on ceramic fibres by a sol-gel technique. J Mater Sci 1994, 29:1795.
20. Rice RW. BN coating of ceramic fibers for ceramic fiber composites. USA: US patent 4642,271; 1987.
21. Kerans R.J., Hay R.S., Pagano N.J. The role of the fiber-matrix interface in ceramic composites. Am Ceram Soc Bull 1989, 68(2):429-442.
22. Lowden R.A., Stinton D.P. Interface modification in Nicalon/SiC composites. Ceram Eng Sci Proc 1988, 9(7-8):205-222.
23. Lawn B.R. Fracture of brittle solids 1993, Cambridge Univ. Press, USA. 2nd ed.
24. Oliver W.C., Pharr G.M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 1992, 7:1564-1583.
25. Bei H., Shim S., George E.P., Miller M.K., Herbert E.G., Pharr G.M. Compressive strengths of molybdenum alloy micro-pillars prepared using a new technique. Scripta Mater 2007, 57(5):397-400.
26. Lawn B.R. Indentation of ceramics with spheres: a century after Hertz. J Am Ceram Soc 1998, 81(8):1977-1994.
27. Lee K.S., Wuttiphan S., Hu X.Z., Lee S.K., Lawn B.R. Contact-induced transverse fractures in brittle layers on soft substrates: a study on slicon nitride bilayers. J Am Ceram Soc 1998, 81(3):571-580.
28. Miranda P., Pajares A., Guiberteau F., Deng Y., Lawn B.R. Designing damage-resistant brittle-coating structures: I. Bilayers. Acta Mater 2003, 51(14-15):4347-4356.
29. Miranda P., Pajares A., Guiberteau F., Deng Y., Zhao H., Lawn B.R. Designing damage-resistant brittle-coating structures: II. Trilayers. Acta Mater 2003, 51(14-15):4357-4365.
30. Chai H., Lawn B.R. Fracture mode transitions in brittle coating layers on compliant substrates as a function of thickness. J Mater Res 2004, 19:1752-1761.