Printed resistive strain sensors for monitoring of light-weight structures

Proceedings of SPIE - The International Society for Optical Engineering

Volumn 7982, Issue , 2011, Pages

  Rausch, J ^a   Salun, L ^a   Griesheimer, S ^a   Ibis, M ^a   Werthschutzky R ^a  

^a DARMSTADT UNIVERSITY OF TECHNOLOGY   (Germany)

Author keywords

monitoring; printing technology; strain sensor

Indexed keywords

BREAKDOWN ELECTRICAL FIELD; BRIDGE CONFIGURATION; CONDUCTING INKS; CONDUCTIVE INK; CROSS SENSITIVITY; DESIGN AND TESTS; ELECTRICAL IMPEDANCE; ELECTRICAL PROPERTY; FOUR-POINT BENDING; GAUGE FACTORS; HYSTERESIS ERRORS; LOADING AND UNLOADING; MEANDER STRUCTURES; METAL SUBSTRATE; NON-LINEARITY; NORMAL STRAIN; PEDOT:PSS; PRINTING TECHNOLOGY; RESISTANCE CHANGE; RESISTIVE STRAIN; SCREEN PRINTING TECHNOLOGY; SENSING LAYERS; STRAIN SENSOR; STRAIN SENSORS; TENSILE TESTS; TEST SPECIMENS; WHEATSTONE BRIDGES;

BRIDGE CIRCUITS; CONDUCTING POLYMERS; ELECTRIC PROPERTIES; INK; LIGHT WEIGHT STRUCTURES; NANOCOMPOSITE FILMS; PRINTING; SMART SENSORS; STRUCTURE (COMPOSITION); TECHNOLOGY; TENSILE TESTING; TOPOLOGY; UNLOADING;

STRAIN;

EID: 79956095797     PISSN: 0277786X     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1117/12.880959     Document Type: Conference Paper

References (23)

1. Schütze, R. and Goetting, H., "Adaptive lightweight cfrp strut for active vibration damping in truss structures," Journal of Intelligent Material Systems and Structures 7, 433-440 (1996).
2. Mayer, D., Herold, S., Kauba, M., and Koch, T., "Approaches for distributed active and passive vibration compensation," ISMA2010 International Conference on Noise and Vibration Engineering (2010).
3. Flaschenträger, D., Thiel, J., Rausch, J., Atzrodt, H., Herold, S., Melz, T., Werthschützky, R., and Hanselka, H., "Implementation and characterization of the dynamic behaviour of a three dimensional truss structure for testing smart devices," International Conference on Nois and Vibration - ISMA (2010).
4. Hoffman, L. and Nakayama, T., "Screen printed capacitor dielectrics," Microelectronics Reliability 7, 131-134 (1968).
5. Bai, J., Zhang, Z. Z., Calata, J. N., and Lu, G.-Q., "Low- temperature sintered nanoscale silver as a novel semiconductor device-metallized substrate interconnect material," Components and Packaging Technologies 29, 589-593 (2006).
6. Maiwald, M., Werner, C., Zoellmer, V., and Busse, M., "INKtelligent printed strain gauges," Sensors and Actuators A: Physical 162(2), 198-201 (2010).
7. Eberhardt, W., Keck, J., Willeck, H., Polzinger, B., and Kück, H., "Drucken von mikro-und nanoskaligen Funktionsschichten auf Thermoplasten zur Erhöhung der Integration mikrosystemtechnischer Packages," GMM-Fachbericht-Mikro-Nano-Integration (2010).
8. Georgi, B., Drucken funktionaler Interdigitalstrukturen mittels Siebdruckverfahren, Master's thesis, TU Darmstadt, Institut für Druckmaschinen und Druckverfahren (2008).
9. Kipphan, H., [Handbook of print media: technologies and production methods ], Springer Verlag (2001).
10. Caglar, U., Studies of Inkjet Printing Technology with Focus on Electronic Materials, PhD thesis, Tampere University of Technology (2009).
11. Singh, M., Haverinen, H. M., Dhagat, P., and Jabbour, G. E., "Inkjet printingprocess and its applications," Advanced Materials 22(6), 673-685 (2010).
12. Someya., T. and Sekitani, T., "Printed skin-like large-area flexible sensors and actuators," Procedia Chemistry 1(1), 9-12 (2009).
13. Mette, A., Richter, P. L., Hörteis, M., and Glunz, S. W., "Metal aerosol jet printing for solar cell metallization," Progress in Photovoltaics: Research and Applications 15, 621-627 (2007).
14. Jones, C. S., "Aerosol-jet-printed, high-speed, flexible thin-film transistor made using single-walled carbon nanotube solution," Microelectronic Engineering 87, 434-437 (2010).
15. Lang, U., [Experimental methods for evaluating the mechanical properties of thin layers of intrinsically conductive polymers] (2008).
16. Srichan, C., Saikrajang, T., Lomas, T., Jomphoak, A., Maturos, T., Phokaratkul, D., Kerdcharoen, T., and Tuantranont, A., "Inkjet printing PEDOT: PSS using desktop inkjet printer," in [Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology, 2009. ECTI-CON 2009. 6th International Conference on], 1, 465-468, IEEE (2009).
17. Latessa, G., Brunetti, F., Reale, A., Saggio, G., and Carlo, A. D., "Piezoresistive behaviour of flexible pedot:pss based sensors," Sensors and Actuators B: Chemical 139(2), 304-309 (2009).
18. Lam, L., McBride, J., and Swingler, J., "The influence of thermal cycling and compressive force on the resistance of poly (3, 4- ethylenedioxythiophene)/poly (4-styrenesulfonic acid)-coated surfaces," Journal of Applied Polymer Science 101(4), 2445-2452 (2006).
19. Kus, M. and Okur, S., "Electrical characterization of pedot: Pss beyond humidity saturation," Sensors and Actuators B: Chemical 143(1), 177-181 (2009).
20. Salun, L., Griesheimer, S., Götz, P., Ibis, M., and Rausch, J., "Mechanical and electrical stability of printed layers against mechanical deformation," Large-area, Organic and Printed Electronics Convention (LOPE-C) (2010).
21. Hoffmann, K., [Eine Einführung in die Technik des Messens mit Dehnungsmessstreifen ] (1985).
22. Nardes, A. M., On the conductivity of PEDOT:PSS thin films, PhD thesis, Technische Universiteit Eindhoven (2007).
23. Instruments, M., "http://www.microninstruments.com/ (checked in february 2011)," tech. rep. (2011).