Bio-based nanocomposites by in situ cure of phenolic prepolymers with cellulose whiskers

Cellulose

Volumn 18, Issue 3, 2011, Pages 619-630

  Liu, Hongzhi ^a   Laborie, Marie Pierre G ^b  

^a Washington State University   (United States)

^b UNIVERSITY OF FREIBURG   (Germany)

Author keywords

Cellulose whiskers; High glass transition temperature; Nanocomposites; Thermoset

Indexed keywords

CELLULOSE NANOWHISKERS; CELLULOSE WHISKERS; DEGREE OF CURE; DIRECT SOLUTION; GLASS TRANSITION TEMPERATURE; HIGH GLASS TRANSITION TEMPERATURE; HIGH TEMPERATURE CURE; HIGH-T; IN-SITU; PREPOLYMERS; REINFORCING EFFECTS; RESIN CURE; SOLVENT EXCHANGES; THERMAL CURING; THERMAL STABILITY; THERMOSETTING RESINS; WEIGHT CONTENT;

CELLULOSE; CRYSTAL WHISKERS; CURING; DIFFERENTIAL SCANNING CALORIMETRY; DYNAMIC ANALYSIS; DYNAMIC MECHANICAL ANALYSIS; GLASS; NANOCOMPOSITES; NANOWHISKERS; PHENOLIC RESINS; PHENOLS; REINFORCEMENT; RESINS; TEMPERATURE; THERMODYNAMIC STABILITY; THERMOSETS;

GLASS TRANSITION;

EID: 79955785247     PISSN: 09690239     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10570-011-9499-x     Document Type: Article

References (43)

1. Angles MN, Dufresne A (2000) Plasticized starch/tunicin whiskers nanocomposites. 1. structural analysis. Macromolecules 33: 8344-8353.
2. Araki J, Wada M, Kuga S (2001) Steric stabilization of a cellulose microcrystal suspension by poly(ethylene glycol) grafting. Langmuir 17: 21-27.
3. Azizi Samir MAS, Alloin F, Sachez JY, Kissi NE, Dufresne A (2004a) Preparation of cellulose whiskers reinforced nanocomposites from an organic medium suspension. Macromolecules 37: 1386-1393.
4. Azizi Samir MAS, Alloin F, Sanchez JY, Dufresne A (2004b) Cellulose nanocrystals reinforced poly(oxyethylene). Polymer 45: 4149-4157.
5. Azizi Samir MAS, Alloin F, Dufresne A (2005) Review of recent research into cellulosic whiskers, their properties and their application in nanocomposite field. Biomacromolecules 6: 612-626.
6. Baun B, Dorgan JR (2009) Single-step method for the isolation and surface functionalization of cellulose nanowhiskers. Biomacromolecules 10: 334-341.
7. Bondeson D, Mathew A, Oksman K (2006) Optimization of the isolation of nanocrystals from microcrystalline cellulose by acid hydrolysis. Cellulose 13: 171-180.
8. Byun HY, Choi MH, Chung IJ (2001) Synthesis and characterization of resole type phenolic resin/layered silicate nanocomposites. Chem Mater 13: 4221-4226.
9. Cao X, Dong H, Li CM (2007) New nanocomposites materials reinforced with flax cellulose nanocrystals in waterborne polyurethane. Biomacromolecules 8: 899-904.
10. Capadona JR, Shanmuganathan K, Tyler DJ, Rowan SJ, Weber C (2008) Stimuli-responsive polymer nanocomposites inspired by the sea cucumber dermis. Science 319: 1370-1374.
11. Carlsson LA, Gillespie JW (1990) In: Delware composites design encyclopedia (vol. 3): processing and fabrication technology. Technomic Publishing Company Inc, Lancaster, p 83.
12. Chazeau L, Cavaille JY, Canova G, Dendievel R, Boutherin B (1999) Viscoelastic properties of plasticized PVC reinforced with cellulose whiskers. J Appl Polym Sci 71: 1797-1808.
13. 2 hybrid organic-inorganic nanocomposite materials by sol-gel method. J Polym Sci Part A Polym Chem 41: 905-913.
14. Dong XM, Revol JF, Gray DG (1998) Effect of microcrystalline preparation conditions on the formation of colloid crystals of cellulose. Cellulose 5: 19-32.
15. Dubief D, Samain E, Dufresne A (1999) Polysaccharide microcrystals reinforced amorphous poly(β-hydroxyoctanoate) nanocomposite materials. Macromolecules 32: 5765-5771.
16. Elaszzouzi-Hafraoui S, Nishiyama Y, Putaux JL, Heux L, Dubreuil F, Rochas C (2008) The shape and size distribution of crystalline nanoparticles prepared by acid hydrolysis of native cellulose. Biomacromolecules 9: 57-65.
17. Favier V, Canova GR, Cavailler JY, Chanzy H, Dufresne A, Gauthier C (1995) Nanocomposite materials from latex and cellulose whiskers. Polym Adv Technol 6: 351-355.
18. Hajji P, Cavaille JY, Favier V, Gauthier C, Vigier G (1996) Tensile behavior of nanocomposites from latex and cellulose whiskers. Polym Compos 17: 612-619.
19. Halpin JC, Kardos JL (1972) Moduli of crystalline polymers employing composite theory. J Appl Phys 43: 2235-2241.
20. Helbert W, Cavaille JY, Dufresne A (1996) Thermoplastic nanocomposites filled with wheat straw whiskers. Part I: processing and mechanical behavior. Polym Compos 17: 604-611.
21. Heux L, Chauve G, Bonini C (2000) Nonflocculating and chiral-nematic self-ordering of cellulose microcrystals suspensions in nonpolar solvents. Langmuir 16: 8210-8212.
22. Hong JK, Frazier CE, Roman M (2010) In: Proceedings of 239th ACS national meeting. American Chemical Society, San Francisco, CELL-237.
23. Klemm D, Philipp B, Heinze T, Heinze U, Wagenknecht W (1998) Systematics of cellulose functionalization. In: Comprehensive cellulose chemistry (vol 2): functionalization of cellulose. Wiley, Weinheim, pp 6-9.
24. Kvien I, Tanem BS, Oksman K (2005) Characterization of cellulose whiskers and their nanocomposites by atomic force and electron microscopy. Biomacromolecules 6: 3160-3165.
25. Ljungberg N, Bonini C, Bortolussi F, Boisson C, Heux L, Cavaille JY (2005) New nanocomposite materials reinforced with cellulose whiskers in atactic polypropylene: effect of surface and dispersion characteristics. Biomacromolecules 6: 2732-2739.
26. Lu J, Askeland P, Drzal LT (2008) Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 49: 1285-1296.
27. Luukko P, Alvila L, Holopainen T, Rainio J, Pakkanen TT (2001) Effect of alkalinity on the structure of phenol-formadehyde resole resins. J Appl Polym Sci 82: 258-262.
28. Marcovich NE, Auad ML, Bellest NE, Nutt SR, Aranguren MI (2006) Cellulose micro/nanocrystals reinforced polyurethane. J Mater Res 21: 870-881.
29. Matos Ruiz M, Cavaille JY, Dufresne A, Gerard JF, Graillat C (2000) Processing and characterization of new thermoset nanocomposites based on cellulose whiskers. Compos Interfaces 7: 117-131.
30. Matos Ruiz M, Cavaille JY, Dufresne A, Graillat C, Gerard JF (2001) New waterborne epoxy coatings based on cellulose nanofillers. Macromol Symp 169: 211-222.
31. Nakagaito AN, Yano H (2008) The effect of fiber content on the mechanical and thermal expansion properties of biocomposites based on microfibrillated cellulose. Cellulose 15: 555-559.
32. Omrani A, Simon LC, Rostami AA (2008) Influence of cellulose nanofiber on the epoxy network formation. Mater Sci Eng A490: 131-137.
33. Pittman Jr CU, Li GZ, Cho HS (2007) Chemical bending between phenolic resins and polyhedral oligomeric silsequioxanes (POSS) in inorganic-organic hybrid nanocomposites. J Inorg Organomet Polym 16: 43-59.
34. Pizzi A (1994) Phenolic resin wood adhesives. In: Advanced wood adhesive technology. Marcel Dekker, New York, pp 89-147.
35. Roman M, Winter WT (2004) Effect of sulfate groups from sulfuric acid hydrolysis on the thermal degradation behavior of bacterial cellulose. Biomacromolecules 5: 1671-1677.
36. Tang L, Weder C (2010) Cellulose whisker/epoxy resin nanocomposites. ACS Appl Mater Intefaces 2: 1073-1080.
37. Tsai SW, Halpin JC, Pagano NJ (1968) In: Composite materials workshop. Technomic Publishing Co., New York, pp 233-253.
38. Wang N, Ding E, Cheng R (2007) Thermal degradation behaviors of spherical cellulose nanocrystals with sulfate groups. Polymer 48: 3486-3493.
39. Wu Q, Henriksson M, Liu X, Berglund LA (2007) A high strength nanocomposite based on microcyrtsalline cellulose and polyurethane. Biomacromolecules 8: 3687-3692.
40. Yeh MK, Tai NH, Liu YJ (2008) Mechanical properties of phenolic-based nanocomposites reinforced by multi-walled carbon nanotubes and carbon fibers. Compos Part A 39: 677-684.
41. Yoonessi M, Toghiani H, Wheeler R, Porcar L, Kline S, Pittman Jr CU (2008) Neutron scattering, electron microscopy and dynamic mechanical studies of carbon nanofiber/phenolic resin composites. Carbon 46: 577-588.
42. Yuan H, Nishiyama Y, Wada M, Kuga S (2006) Surface acylation of cellulose whiskers by drying aqueous emulsion. Biomacromolecules 7: 696-700.
43. 8-polyhedral oligomeric silsesquioxane (POSS) hybrid nanocomposites: synthesis, morphology, thermal and mechanical properties. J Inorg Organomet Polym 17: 159-171.