Effect of hemicellulose extraction on physical and mechanical properties and mold susceptibility of flakeboard

Forest Products Journal

Volumn 61, Issue 1, 2011, Pages 31-37

  Hosseinaei, Omid ^a   Wang, Siqun ^a   Rials, Timothy G ^a   Xing, Cheng ^b   Taylor, Adam M ^a   Kelley, Stephen S ^c  

^a UNIVERSITY OF TENNESSEE   (United States)

^b TTS Inc   (Canada)

^c NORTH CAROLINA STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CELLULOSE; EMULSIFICATION; MECHANICAL PROPERTIES; MOLDS; PHENOLIC RESINS; WATER ABSORPTION;

HEMICELLULOSE EXTRACTION; HYDROPHILIC POLYMERS; IN-WATER ABSORPTION; MOLD SUSCEPTIBILITIES; PHENOL FORMALDEHYDE RESINS; PHYSICAL AND MECHANICAL PROPERTIES; PRE-TREATMENT; THICKNESS SWELLING;

EXTRACTION;

EID: 79955747436     PISSN: 00157473     EISSN: None     Source Type: Journal    
DOI: 10.13073/0015-7473-61.1.31     Document Type: Review

References (33)

1. Allen, S. G., D. Schulman, J. Lichwa, M. J. Antal, M. Laser, and L. R. Lynd. 2001. A comparison between hot water and steam fractionation of corn fiber. Ind. Eng. Chem. Res. 40:2934-2941. (Pubitemid 33009349)
2. American Wood Protection Association (AWPA). 2006. Standard method of evaluating the resistance of wood product surfaces to mold growth. AWPA E24-06. http://www.awpa.com/standards/updates/E24-06.pdf. Accessed April 10, 2011.
3. ASTM International. 2006. Standard test methods for evaluating properties of wood-base fiber and particle panel materials. ASTM D1037-06. ASTM International, West Conshohocken, Pennsylvania.
4. Bhuiyan, M. T. R., N. Hirai, and S. Nobuo. 2000. Changes of crystallinity in wood cellulose by heat treatment under dried and moist conditions. J. Wood Sci. 46:431-436. (Pubitemid 37292932)
5. Buntrock, G. 2007. Cheap no more. The Economist 385(8558):81-83. Canadian Standards Association (CSA). 2005. Standards on OSB and waferboard. CSA O437. CSA, Mississauga, Ontario, Canada.
6. Canadian Standards Association (CSA). 2005. Standards on OSB and waferboard. CSA O437. CSA, Mississauga, Ontario, Canada.
7. Das, S., A. K. Saha, P. K. Choudhury, R. K. Baska, B. C. Mitra, T. Todd, S. Lange, and R. M. Rowell. 1999. Effects of steam pretreatment of jute fiber on dimensional stability of jute composition. J. Appl. Polym. Sci. 76:1652-1661. (Pubitemid 30596319)
8. Dwianto, W., F. Tanaka, M. Inoue, and M. Norimoto. 1996. Crystallinity change of wood by heat or steam treatment. Wood Res 83:47-49.
9. Essential Information for the Forest Products Industry (RISI). 2009. North American wood panels annual historical data. http://www.risiinfo.com/ Marketing/ahd/Excerpts/na-wood-panels.pdf. Accessed May 9, 2011.
10. Fogel, J. L. and J. D. Lloyd. 2002. Mold performance of some construction products with and without borates. Forest Prod. J. 52(2): 38-43. (Pubitemid 34326190)
11. Goldemberg, J. 2007. Ethanol for a sustainable energy future. Science 315(5813):808-810.
12. Hakkou, M., M. Petrissans, A. Zoulalian, and P. Gerardin. 2005. Investigation of wood wettability changes during heat treatment on the basis of chemical analysis. Polym. Degrad. Stab. 89:1-5. (Pubitemid 40497345)
13. Hartley, I. D., S. Wang, and Y. Zhang. 2007. Water vapor sorption isotherm modeling of commercial oriented strand panel based on species and resin type. Build. Environ. 42(10):3655-3659. (Pubitemid 46880928)
14. Hosseinaei, O., S. Wang, T. G. Rials, and C. Xing. 2011. Effects of decreasing carbohydrate content of wood strands on their properties. Cellulose 18(3):841-850.
15. Hsu, W. E., W. Schwald, J. Schwald, and J. A. Shields. 1988. Chemical and physical changes required for producing dimensionally stable wood-based composites. Wood Sci. Technol. 22:281-289.
16. Hu, G., J. A. Heitmann, and O. J. Rojas. 2008. Feedstock pretreatment strategies for producing ethanol from wood bark and forest residues. Bioresources 3(1):270-294. (Pubitemid 351916862)
17. Okino, E. Y. A., D. E. Teixeria, and C. H. S. Del Menezzi. 2007. Postthermal treatment of oriented strandboard (OSB) made from cypress (Cupressus glauca Lam.). Maderas Cien. Tecnol. 9(3):199-210. (Pubitemid 350280316)
18. Overend, R. P., E. Chornet, and J. A. Gascoigne. 1987. Fractionation of lignocellulosics by steam-aqueous pretreatments. Philos. Trans. R. Soc. Lond. Ser. A Math. Phys. Eng. Sci. 321:523-536.
19. Papadopoulos, A. N. 2006. Decay resistance in ground stake test of acetylated OSB. Holz Roh- Werkst. 64:245-246. (Pubitemid 43787015)
20. Paredes, J. J., R. Jara, S. M. Shaler, and A. R. P. VanHeiningen. 2008. Influence of hot water extraction on the physical and mechanical behavior of OSB. Forest Prod. J. 58(12):56-62.
21. Paredes, J. J., R. Jara, S. M. Shaler, and A. R. P. VanHeiningen. 2009. Surface characterization of red maple strands after hot water extraction. Wood Fiber Sci. 41(1):38-50.
22. Paul, W., M. Ohlmeyer, H. Leithoff, M. J. Boonstra, and A. Pizzi. 2006. Optimizing the properties of OSB by a one-step pre-treatment process. Holz Roh- Werkst. 64:227-234. (Pubitemid 43787012)
23. Saha, B. C. 2003. Hemicellulose bioconversion. J. Ind. Microbiol. Biotechnol. 30:279-291. (Pubitemid 36873792)
24. Sattler, C., N. Labbe, D. Harper, T. Elder, and T. Rials. 2008. Effects of hot water extraction on physical and chemical characteristics of oriented strand board (OSB) wood flakes. Clean Soil Air Water 36(8): 674-681.
25. Segal, L., J. Creely, A. Martin, and C. Conrad. 1959. An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer. Text. Res. J. 29(10):786-794.
26. Sernek, M., M. Boonstra, A. Pizzi, A. Despres, and P. Gerardin. 2008. Bonding performance of heat treated wood with structural adhesives. Holz Roh- Werkst. 66(3):173-180. (Pubitemid 351707281)
27. Smith, W. R. and Q. Wu. 2005. Durability improvement for structural wood composites through chemical treatments, current state of the art. Forest Prod. J. 55(2):8-17. (Pubitemid 40325961)
28. Sun, Y. and J. Cheng. 2002. Hydrolysis of lignocellulosic materials for ethanol production: a review. Bioresour. Technol. 83(1):1-11. (Pubitemid 34126398)
29. Tjeerdsma, B. F. and H. Militz. 2005. Chemical changes in hydrothermal treated wood: FTIR analysis of combined hydrothermal and dry heattreated wood. Holz Roh- Werkst. 63:101-111.
30. Wyman, C. E., B. E. Dale, R. T. Elander, M. Holtzapple, M. R. Ladisch, and Y. Y. Lee. 2005. Coordinated development of leading biomass pretreatment technologies. Bioresour. Technol. 96:1959-1966. (Pubitemid 41174565)
31. Ye, X. P., S. Wang, R. Ruan, J. Qi, A. R. Womac, and C. J. Doona. 2006. Water mobility and mold susceptibility of engineered wood products. Trans. ASABE 49(4):1159-1165. (Pubitemid 44682607)
32. Yildiz, S. and E. Gumushkaya. 2007. The effects of thermal modification on crystalline structure of cellulose in soft and hardwood. Build. Environ. 42:62-67. (Pubitemid 44426575)
33. Zhang, Y., O. Hosseinaei, S. Wang, and Z. Zhou. Influence of hemicellulose extraction on the water uptake behavior of wood strands. Wood Fiber Sci. (in press).