The transformation mechanism from suspension to green body and the development of colloidal forming

Ceramics International

Volumn 37, Issue 5, 2011, Pages 1435-1451

  Yu, Juanli ^a   Yang, Jinlong ^a   Huang, Yong ^a  

^a TSINGHUA UNIVERSITY   (China)

Author keywords

A. Suspension; Coagulation mechanism; Colloidal forming

Indexed keywords

CERAMIC MATERIALS; COAGULATION; DEFECTS; INJECTION MOLDING; SINTERING; SLIP FORMING; SUSPENSIONS (FLUIDS);

CERAMIC FABRICATION; COAGULATION MECHANISM; COLLOIDAL FORMING; COMPLEX SHAPED CERAMICS; DEFECTS FORMATION; DIRECT COAGULATION CASTING; SINTERING PROCESS; TRANSFORMATION MECHANISMS;

CASTING;

EID: 79955474325     PISSN: 02728842     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ceramint.2011.01.019     Document Type: Review

References (196)

1. B.V. Velamakanni, F.F. Lange, Method for preparation of dense ceramic products, US Patent 5,188,780 (1993-2-23).
2. C.B. Carter, and M.G. Norton Shaping and forming Ceramic Materials 2007 Springer New York 10.1007/978-0-387-46271-4
3. Y. Huang, L.M. Zhang, and J.L. Yang Research progress of new colloidal forming processes for advanced ceramics J. Chin. Ceram. Soc. 35 2007 1 10
4. Y.S. Jung, U. Paik, and C. Pagnoux Consolidation of aqueous concentrated silicon nitride suspension by direct coagulation casting Mater. Sci. Eng. A. 342 2003 93 100 (Pubitemid 35437002)
5. Bergstrom, L., Method for forming ceramic powders by temperature induced flocculation, US Patent 5,340,532 (1994-8-23).
6. G.V. Franks, B.V. Velamakanni, and F.F. Lange Vibraforming and in-situ flocculation of consolidated, coagulated, alumina slurries J. Am. Ceram. Soc. 78 1995 1324 1328
7. T.J. Graule, F.H. Baader, and L.J. Gauckler Shaping of ceramic green compacts direct from suspensions by enzyme catalyzed reactions CFI, Ceram. Forum Int. 71 1994 317 323
8. L.J. Gauckler, T.J. Graule, and F.H. Baader Ceramic forming using enzyme catalysed reactions Mater. Chem. Phys. 61 1999 78 102 (Pubitemid 129587905)
9. D.R. Ulrich Chemical processing of ceramics Chem. Eng. News 68 1990 28 40
10. L.M. Sheppart Colloid processing of powders Ceram. Bull. 68 1989 980 985
11. W.H. Rhodes Agglomerate and particle size effects on sintering yttria-stabilized zirconia J. Am. Ceram. Soc. 64 1981 19 22 (Pubitemid 12429361)
12. F.F. Lange Powder processing science and technology for increased reliability J. Am. Ceram. Soc. 72 1989 3 15
13. I.A. Aksay Microstructure control through colloidal consolidation J.A. Mangels, G.L. Messing, Adv in Ceram, vol. 9, Forming of Ceramics 1984 Am. Ceram. Soc. Columbus, OH 94 104 (Pubitemid 15574639)
14. L. Bergstrom Handbook of Applied Surface and Colloid Chemistry, Chapter 9, Colloidal Processing of Ceramics vol. 1 2001 Wiley New York pp. 201-218
15. W.M. Sigmund, N.S. Bell, and L. Bergstrom Novel powder-processing methods for advanced ceramics J. Am. Ceram. Soc. 83 2000 1557 1574
16. 4 ceramics through orthogonal experimental design J. Ceram. Process. Res. 9 2008 624 629
17. J.L. Yu, H.J. Wang, and J. Zhang Gelcasting preparation of porous silicon nitride ceramics by adjusting the content of monomers J. Sol-Gel. Sci. Technol. 53 2010 515 523
18. 3 suspensions with poly(methacrylic acid) polyelectrolyte J. Am. Ceram. Soc. 71 1988 250 255
19. J. Cesarano III, and I.A. Aksay Processing of highly concentrated aqueous α-alumina suspensions stabilized with polyelectrolyte J. Am. Ceram. Soc. 71 1988 1062 1067
20. J.E. Gebhardt, and D.W. Fuerstenau Adsorption of polyacrylic acid at oxide/water interfaces Colloids Surf. 7 1983 221 231 (Pubitemid 14449379)
21. A. Foissy, A.E.L. Attar, and J.M. Lamarche Adsorption of polyacrylic acid on titanium dioxide J. Colloid Interface Sci. 96 1983 275 287
22. K.F. Tjipangandjara, Y.B. Huang, and P. Somasundaran Correlation of alumina flocculation with adsorbed PAA conformation Colloids Surf. 44 1990 229 236 (Pubitemid 20670386)
23. K.F. Tjipangandjara, and P. Somasundaran Effects of changes in adsorbed PAA on alumina flocculation Colloids Surf. 55 1991 245 255 (Pubitemid 21734329)
24. K.F. Tjipangandjara, and P. Somasundaran Effects of conformation of PAA on the dispersion-flocculation of alumina and kaolinite fines Adv. Powder Technol. 3 1992 119 127
25. P. Somasundaran, and X. Yu Flocculation-dispersion of suspensions by controlling adsorption and conformation of polymers and surfactants Adv. Colloid Interface Sci. 53 1994 31 49
26. X. Yu, and P. Somasundaran Role of polymer conformation in interparticle-bridging dominated flocculation J. Colloid Interface Sci. 77 1996 283 287 (Pubitemid 26166464)
27. Z.H. Pan, P. Somasundaran, and L. Senak Concentrated dispersions, Chapter 13, Concentrated dispersions theory, experiment, and applications polymer adsorption and conformation in dispersion-flocculation of concentrated suspensions ACS Symp. Ser. 878 2004 185 204
28. 4 with polyelectrolyte deflocculants Key Eng. Mater. 89-91 1994 679 682
29. D. Liu, and S.G. Malghan Role of polyacrylate in modifying interfacial properties and stability of silicon nitride particles in aqueous suspensions Colloids Surf. A 110 1996 37 45 (Pubitemid 26155551)
30. R.S. Pradip, R. Premachandran, and S.G. Malghan Electrokinetic behaviour and dispersion characteristics of ceramic powders with cationic and anionic polyelectrolytes Bull. Mater. Sci. 17 1994 911 920
31. L.S.H. Lum, S.G. Malghan, and S.B. Schiller Standard reference materials for particle size analysis of ceramic powders by gravity sedimentation Powder Technol. 87 1996 233 238
32. S.G. Malghan, V.A. Hackley, and P.S. Wang Intelligent processing of ceramic powders and slurries Ceram. Eng. Sci. Proc. 154 1994 527 535
33. V.A. Hackley Colloidal processing of silicon nitride with poly-(acrylic acid). I. Adsorption and electrostatic interactions J. Am. Ceram. Soc. 80 1997 2315 2325 (Pubitemid 127579168)
34. V.A. Hackley, and S.G. Malghan Surface chemistry of silicon nitride powder in the presence of dissolved ions J. Mater. Sci. 29 1994 4420 4430
35. S.G. Malghan Silicon nitride powders and their processing Key Eng. Mater. 56-57 1991 243 264 (Pubitemid 21687032)
36. M.A. Janney, O.O. Omatete, and C.A. Walls Development of low-toxicity gelcasting systems J. Am. Ceram. Soc. 81 1998 581 591 (Pubitemid 128599217)
37. C.J. Shih, and M.H. Hon Stability of colloidal silicon nitride suspension with poly-electrolyte Ceram. Int. 26 2000 47 55
38. C.M. Wang, and F.L. Riley Alumina-coating of silicon nitride powder J. Eur. Ceram. Soc. 10 1992 83 93 (Pubitemid 23593461)
39. Q. Tang, Z.P. Xie, and J.L. Yang Coating of silicon nitride and its colloidal behavior J. Mater. Sci. Lett. 17 1998 1239 1241 (Pubitemid 128509372)
40. J.L. Zhou, Y. Huang, and Z.P. Xie Influence of coating and gelcasting on properties of silicon nitride ceramic J. Mater. Eng. 8 2001 40 43 (in Chinese)
41. R.J. Hunter Zeta Potential in Colloid Science-principles and Application 1981 Academic Press New York
42. 4PAA-stabillized zirconia suspension J. Colloid Interface Sci. 213 1999 552 556 (Pubitemid 29394723)
43. K.R. Rogan, A.C. Bentham, and I.A. George Collidal stability of calcite dispersion treated with sodium polyacrylate Colloid Polym. Sci. 272 1994 1175 1189
44. 4 with PAA: adsorption and electrostatic interactions J. Am. Ceram. Soc. 80 1997 2315 2325 (Pubitemid 127579168)
45. A. Kristoffersson, R. Lapasin, and C. Galassi Study of interactions between polyelectrolyte dispersant, alumina and latex binders by rheological characterization J. Eur. Ceram. Soc. 18 1998 2133 2140 (Pubitemid 29118717)
46. F.Q. Tang, X.X. Huang, and Y.F. Zhang Effect of disperants on surface chemical properties of nano-zirconia suspensions Ceram. Int. 26 2000 93 97
47. P. Somasundaran, X. Yu, and S. Krishnakumar Role of conformation and orientation do surfactants and polymers in controlling flocculation and dispersion of aqueous and non-aqueous suspensions Colloids Surf. A 133 1998 125 133 (Pubitemid 28157148)
48. W.A. Ducker, T.J. Senden, and R.M. Pashley Direct measurement of colloidal forces using an atomic force microscope Nature 353 1991 239 241 (Pubitemid 21896759)
49. W.A. Ducker, T.J. Senden, and R.M. Pashley Measurement of forces in liquids using a force microscope Langmuir 8 1992 1831 1836
50. J.A. Lewis Colloidal processing of ceramics J. Am. Ceram. Soc. 83 2000 2341 2359
51. F.F. Lange, and K.T. Miller Pressure filtration: kinetics and mechanics Am. Ceram. Soc. Bull. 66 1987 1498 1504
52. T.J. Fennelly, and J.S. Reed Mechanics of pressure casting J. Am. Ceram. Soc. 55 1972 264 268
53. D.S. Adcock, and I.C. McDowall The mechanism of filter pressing and slip casting J. Am. Ceram. Soc. 40 1957 355 360
54. R.R. Rowlands A review of the slip casting process Am. Ceram. Soc. Bull. 45 1966 16 19
55. I.A. Aksay, and C.H. Schilling J.A. Mangels, Mechanics of Colloidal Filtration, vol. 9: Forming of Ceramics 1984 Am. Ceram. Soc. Columbus, OH 85 93
56. K.T. Miller, and C.F. Zukoski Osmotic consolidation of suspensions and gels J. Am. Ceram. Soc. 77 1994 2473 2478
57. K.T. Miller, R.M. Melant, and C.F. Zukoski Comparison of the compressive yield response of aggregated suspensions: pressure filtration, centrifugation, and osmotic consolidation J. Am. Ceram. Soc. 79 1996 2545 2556 (Pubitemid 126551346)
58. G.N. Howatt, R.G. Breckenridge, and J.M. Brownlow Fabrication of thin sheets for capacitors J. Am. Ceram. Soc. 30 1947 237 420
59. D.J. Shanefield, and R.E. Mistler Fine-grained alumina substrates: I, the manufacturing process Am. Ceram. Soc. Bull. 53 1974 416 420
60. R.E. Mistler Tape casting: the basic process for meeting the needs of the electronic industry Am. Ceram. Soc. Bull. 69 1990 1022 1026
61. J. Cesarano, R. Segalman, and P. Calvert Robocasting provides moldless fabrication from slurry deposition Ceram. Ind. 1998 94 102
62. F.M. Tiller, and D. Znidarcic Applications of granular mechanics to slip casting, filtration of ceramics. I. Slip casting J. Am. Ceram. Soc. 69 1986 882 887
63. B.J. Kellet, and D. Znidarcic Application of granular mechanics to slip casting, filter pressing and drying V.E. Henkes, G.Y. Onoda, W.M. Carty, Science Whitewares 1996 Am. Ceram. Soc. Columbus, OH 133 146
64. F.M. Tiller, and N.B. Hsyung Theory of filtration of ceramics. II. Slip casting on radial surface J. Am. Ceram. Soc. 74 1991 210 218
65. M. Sobue, and J. Sakai Development of computer simulation method for slip casting process J. Jpn. Soc. Powder Powder Metall. 41 1994 293 296 (in Japanese)
66. J. Shimizu, M. Takahashi, and T. Aragaki Finite element method analysis of three-dimensional cake growth during slip casting J. Ceram. Soc. Jpn. 105 1997 891 896 (in Japanese) (Pubitemid 127606565)
67. T. Banno, S. Sano, and K. Oda Two-dimensional simulation of cake growth in slip casting J. Am. Ceram. Soc. 81 1998 2933 2941 (Pubitemid 128578682)
68. T. Banno, S. Sano, and K. Oda Application of a two-dimensional computer simulation to cake growth in slip casting with complicated-shape gypsum mold J. Am. Ceram. Soc. 82 1999 3401 3406 (Pubitemid 30541058)
69. T. Banno, Y. Hotta, and S. Sano Cake growth control in slip casting J. Eur. Ceram. Soc. 21 2001 879 882 (Pubitemid 32546117)
70. Y.H. Zhang, and J. Binner Enhanced casting rate by dynamic heating during slip casting J. Eur. Ceram. Soc. 22 2002 135 142 (Pubitemid 33122368)
71. K.M. Lindqvist, and E. Carlström Indirect solid freeform fabrication by binder assisted slip casting J. Eur. Ceram. Soc. 25 2005 3539 3545 (Pubitemid 41110201)
72. 3 ceramic composites by slip casting Trans. Nonferrous Met. Soc. (in Chinese) 20 2010 624 631
73. F.F. Lange Densification of powder rings constrained by dense cylindrical cores Acta Metall. 37 1989 697 704
74. A.J. Ruys, and C.C. Sorrell Slip casting alumina with Na-CMC Am. Ceram. Soc. Bull. 75 1996 66 69
75. M.J. Brezina, and R.J. Thomas Special additives enhance casting slips Am. Ceram. Soc. Bull. 79 2000 43 46
76. R.E. Mistler, D.J. Shaneffeld, and R.B. Runk Tape casting of ceramics G.Y. Onada, L.L. Hench, Ceramic Processing Before Firing 1978 Wiley Inter Sciences New York 411 418
77. J.C. Williams Doctor blade process F.F.Y. Wang, Treatise on Material Science and Technology, vol. 9, Ceramics Fabrication Processes 1994 Academic Press New York 173 197
78. T. Chartier Tape casting D. Bloor, R.J. Brook, M.C. Flemings, S. Mahajan, Encyclopedia of Advanced Materials 1994 Pergamon Press Cambridge 2763 2767
79. Y.T. Chuo, Y.T. Ko, and M.F. Yan Fluid flow model for ceramic tape casting J. Am. Ceram. Soc. 70 1987 C-280 C-282
80. R. Pitchumani, and V.M. Karbhari Generalized fluid flow model for ceramic tape casting J. Am. Ceram. Soc. 78 1995 2497 2503
81. R.E. Mistler Tape casting: past, present, potential Am. Ceram. Soc. Bull. 77 1998 82 86
82. D. Hotza, and P. Greil Review: aqueous tape casting of ceramic powders Mater. Sci. Eng. A 202 1995 206 217
83. R. Moreno The role of slip additives in tape casting technology. Part I. Solvents and dispersants Am. Ceram. Soc. Bull. 69 1990 1022 1026
84. P. Nahass, W.E. Rhine, and R.L. Pober A comparison of aqueous slurries for tape casting K.M. Nair, R. Pohanka, R.C. Buchanan, Ceramic Transactions, vol. 15, Materials and Processes in Microelectronic Systems 1990 American Ceramic Society Westerville, OH 355 364
85. Q.Q. Tan, M. Gao, and Z.T. Zhang Polymerizing mechanism and technical factors optimization of nanometer tetragonal polycrystalline zirconia slurries for the aqueous-gel-tape-casting process Mater. Sci. Eng. A 382 2004 1 7 (Pubitemid 39168967)
86. Z.Y. Yu, Y. Huang, and C.A. Wang A novel gel tape casting process based on gelation of sodium alginate Ceram. Int. 30 2004 503 507
87. P. Nahass, R.L. Pober, and W.E. Rhine Prediction and explanation of aging shrinkage in tape-cast ceramic green sheets J. Am. Ceram. Soc. 75 1992 2373 2378
88. 3 by gel-casting J. Eur. Ceram. Soc. 15 1995 1 8
89. R.R. Landham, P. Nahass, and D.K. Leung Potential use of polymerizable solvents and dispersants for tape casting of ceramics Am. Ceram. Soc. Bull. 10 1987 1513 1516
90. G.S. Grader, and L. Zuri Tape casting slip preparation by in situ polymerization J. Am. Ceram. Soc. 76 1993 1809 1814 (Pubitemid 23679195)
91. S. Yoshikawa, C. Heartling, and D.J. Smith Patterned ceramic green films using UV curable binders G.L. Messing, Ceramic Powder Science III 1988 American Ceramic Society Westerville, OH 533 560
92. H.D. Lee, R.L. Pober, and P.D. Calvert Photopolymerizable binders for ceramics J. Mater. Sci. Lett. 5 1986 81 83
93. D.J. Smith, R.E. Newnham, and S. Yoshikawa UV curable system for ceramic tape casting IEEE Seventh International Symposium on Applications of Ferroelectrics Urbana-Champain, IL, USA 1990
94. R. Waack, K. Venkataswamy, B.E. Novich, Polymerizable binder solutions for low viscosity, highly loaded particulate suspensions, and methods for making green articles therefrom by tape casting or injection molding, US Patent PCT/US88/01232 (1988).
95. J.H. Xiang, Study of a novel process-instant solidification of aqueous gel-tape-casting for ceramic sheet formation, Dissertation of Tsinghua University Beijing, 2001, pp. 40-57 (in Chinese).
96. Y. Huang, J.H. Xiang, Z.P. Xie, The thin ceramic green device body of rapid curing and forming in situ through spray initiator, China Patent ZL00107495.4 (2000).
97. W.J. Si, T.J. Graule, and F.H. Baader Direct coagulation casting of silicon carbide components J. Am. Ceram. Soc. 82 1999 1129 1136 (Pubitemid 129692863)
98. B. Derjaguin, and L. Landau Theory of the stability of strongly charged lyophobic sols and of the adhesion of strongly charged particles in solutions of electrolytes Acta Physiochim. URSS 14 1941 633 662
99. E.J. Verwey, and J.Th.G. Overbeek Theory of the Stability of Lyophobic Colloids 1948 Elsevier Amsterdam, The Netherlands
100. J. Philip, O.M. Monval, and F.L. Calderon Forces between colloidal droplets in the presence of a weak polyelectrolyte Bull. Mater. Sci. 22 1999 313 320 (Pubitemid 30504206)
101. R.J. Pugh Dispersion and stability of ceramic powder in liquid R.J. Ruge, L. Bergstrom, Surface and Colloid Chemistry in Advanced Ceramics Processing 1994 Marcel Dekker New York 127 192
102. L.J. Gaucker, T.J. Graule, and F.H. Baader Ceramic forming using enzyme catalyzed reactions Mater. Chem. Phys. 61 1999 78 102
103. L.J. Gaucker, T.J. Graule, and F.H. Baader Enzyme catalysis of alumina forming Key Eng. Mater. 159-160 1999 135 150
104. T.J. Graule, F.H. Baader, and L.J. Gaucker Casting uniform ceramics with direct coagulation Chemtech. Am. Chem. Soc. 25 1995 31 37
105. F.H. Baader, T.J. Graule, and L.J. Gauckler Direct coagulation casting - a new green shaping technique. Part I. Application to alumina Ind. Ceram. 16 1996 31 36
106. F.H. Baader, T.J. Graule, and L.J. Gauckler Direct coagulation casting - a new green shaping technique. Part II. Application to alumina Ind. Ceram. 16 1996 36 40 (Pubitemid 126522734)
107. B. Balzer, M.K.M. Hruschka, and L.J. Gauckler In situ rheological investigation of the coagulation in aqueous alumina suspensions J. Am. Ceram. Soc. 84 2001 1733 1739 (Pubitemid 33670301)
108. B. Blazer, M.K.M. Hruschka, and L.J. Gauckler Coagulation kinetics and mechanical behaviour of wet alumina green bodies produced via DCC J. Colloid Interface Sci. 216 1999 379 386 (Pubitemid 29385680)
109. L.J. Gauckler, T.J. Graule, and F. Baader Enzyme catalysis of alumina foaming Key Eng. Mater. 159-160 1999 130 150
110. D. Hesselbarth, E. Tervoort, and C. Urban Mechanical properties of coagulated wet particle net works with alkali swellable thickners J. Am. Ceram. Soc. 84 2001 1689 1695 (Pubitemid 33670294)
111. A.R. Studart, C.V. Pandolfelli, and E. Tervoort In situ coagulation of high alumina zero cement refractory castables J. Am. Ceram. Soc. 85 2002 1947 1953
112. B. Balzer, and L.J. Gauckler Novel colloidal forming techniques: direct coagulation casting S. Somiaya, Hand Book of Advanced Ceramics, vol. I, Material Science 2003 Elsevier Academic Press London 453 458
113. M.K.M. Hruschka, W. Si, and S. Tosatti Processing of β-silicon nitride from water based a-silicon nitride, alumina and yttria powder suspensions J. Am. Ceram. Soc. 82 1999 2039 2043 (Pubitemid 30507612)
114. K. Prabhakaran, S. Ananthakumar, and C. Pavithran Preparation of extrudable alumina paste by coagulation of electrosterically stabilized aqueous slurries J. Eur. Ceram. Soc. 22 2002 153 158 (Pubitemid 33119411)
115. A.L. Penard, F. Rossignol, and H.S. Nagaraja Dispersion of α-alumina ultrafine powders using 2-phosphonobutane 1,2,3 tricarboxylic acids for the implementation of a DCC J. Eur. Ceram. Soc. 25 2005 1109 1118 (Pubitemid 40335037)
116. A.L. Penard, F. Rossignol, and C. Pagnoux Coagulation of concentrated suspension of ultra fine alumina powders by PH Shift J. Am. Ceram. Soc. 89 2006 2073 2079 (Pubitemid 43938479)
117. R. Laucournet, C.T. Pagnoux, and C. Chartier Coagulation method of aqueous concentrated alumina suspensions by thermal decomposition of hydroxyl aluminium diacetate J. Am. Ceram. Soc. 83 2000 2661 2667 (Pubitemid 32023106)
118. Y. Yin, J.G.P. Binner, and M.J. Hey Hydrolysis of carboxylic lactones in alumina slurries J. Eur. Ceram. Soc. 26 2006 1171 1177 (Pubitemid 43174812)
119. J.G.P. Binner, I. Santacruz, and A.M.Mc. Dermott Rheological characterization of electrosterically dispersed alumina suspensions during in situ coagulation J. Am. Ceram. Soc. 89 2006 863 868 (Pubitemid 43333418)
120. J.G.P. Binner, A.M.Mc. Dermott, and Y. Yin In situ coagulation moulding: a new route for high quality net shape ceramics Ceram. Int. 32 2006 29 35 (Pubitemid 41455686)
121. K. Prabhakaran, R. Sooraj, and A. Melkeri Novel coagulation method for direct coagulation casting of aqueous alumina slurries prepared using poly(acrylate) dispersant J. Am. Ceram. Soc. 91 2008 615 619 (Pubitemid 351222497)
122. K. Prabhakaran, R. Sooraj, and A. Melkeri A new direct coagulation casting process for alumina slurries prepared using poly(acrylate) dispersant Ceram. Int. 35 2009 979 985
123. N. Israelachvili, and H.K. Christenson Liquid structure and short-range forces between surfaces in liquids Physica A (Amsterdam) 140A 1986 278 284
124. T.J. Graule, W. Si, and F.H. Baader Direct coagulation casting (DCC): fundamentals of a new forming process for ceramics H. Hausner, G.L. Messing, S.I. Hirano, Ceramics Transactions, vol. 51, Ceramic Processing Science and Technology 1995 American Ceramic Society Westerville, OH 457 461
125. M.H. Helbig, M. Hutter, and U.P. Schonholzer Lack of syneresis during gelation of dense colloidal suspensions J. Colloid Interface Sci. 222 2000 46 50 (Pubitemid 30080594)
126. A.R. Studart, V.C. Pandoleflli, E. Tervoort, and L.J. Gauckler Gelling of alumina suspensions using alginic acid salt and hydroxyaluminium diacetate J. Am. Ceram. Soc. 85 2002 2711 2718 (Pubitemid 35458239)
127. T. Kosmac, S. Novak, and M. Sajko Hydrolysis-assisted solidification (HAS): a new setting concept for ceramic net-shaping J. Eur. Ceram. Soc. 17 1997 427 432 (Pubitemid 127426141)
128. T. Kosmac Near-net-shape of engineering ceramics: potential and prospects of aqueous injection molding (AIM) G.N. Batini, M. Havier, P. Sejgalik, Proceedings of NATO ARW on Engineering Ceramics' 96 1997 Kluwer New York 13 22
129. S. Novak, T. Kosmac, and K. Krnel Principle soft hehydrolysis assisted solidification (HAS) process for forming ceramic bodies from aqueous suspension J. Eur. Ceram. Soc. 22 2002 289 329
130. P. Bowen, J.G. Highfield, and A. Mocellin Degradation of aluminum nitride powder in an aqueous environment J. Am. Ceram. Soc. 73 1990 724 728 (Pubitemid 20661234)
131. M. Oliveira, S. Olhero, and J. Rocha Controlling hydrolysis and dispersion of AlN powders in aqueous media J. Colloid Interface Sci. 261 2003 456 463 (Pubitemid 36535461)
132. S. Fukumoto, T. Hookabe, and H. Tsubakino Hydrolysis behavior of aluminum nitride in various solutions J. Mater. Sci. 35 2000 2743 2748
133. R. Greenwood, and K. Kendall Selection of suitable dispersants for aqueous suspensions of zirconia and titania powders using acoustophoresis J. Eur. Ceram. Soc. 19 1999 479 488
134. T. Kosmac, S. Novak, and K. Krnel Hydrolysis assisted solidification process and use in ceramic wet forming Z. Metallkd. 92 2001 150 157 (Pubitemid 32271772)
135. S. Novak, and T. Kosmac Preparation of alumina ceramics from aqueous suspension employing the hydrolysis of aluminum nitride J. Mater. Res. 17 2002 445 450 (Pubitemid 34574564)
136. 4 ceramics Mater. Sci. Forum 413 2003 75 80
137. P. Hidber, T.J. Graule, and L.J. Gauckler Citric acid: a dispersant for aqueous alumina suspensions J. Am. Ceram. Soc. 795 1996 1857 1867 (Pubitemid 126588789)
138. R.J. Hunter Foundations of Colloid Science 1989 Clarendon Press Oxford p. 91
139. G.V. Franks, B.V. Velamakanni, and F.F. Lange Vibraforming an in situ flocculation of consolidated, coagulated, alumina slurries J. Am. Ceram. Soc. 78 1995 1324 1328
140. A.R. Studart, F.A.O. Valenzuela, and L.J. Gauckler Enzyme-cogulated high alumina refractory castables Am. Ceram. Soc. Bull. 81 2002 26 31
141. B. Balzer, M.K.M. Hruschka, and L.J. Gauckler Coagulation kinetics and mechanical behavior of wet alumina green bodies produced via DCC J. Colloid Interface Sci. 216 1999 379 386 (Pubitemid 29385680)
142. K. Prabhakaran, C.S. Kumbhar, and S. Raghunath Effect of concentration of ammonium poly(acrylate) dispersant and MgO on coagulation characteristics of aqueous alumina direct coagulation casting slurries J. Am. Ceram. Soc. 91 2008 1933 1938
143. K. Prabhakaran, S. Raghunath, and A. Melkeri Mechanical properties of wet-coagulated alumina bodies prepared by direct coagulation casting using a MgO coagulating agent J. Am. Ceram. Soc. 91 2008 3608 3612
144. K. Prabhakaran, S. Raghunath, and A. Melkeri Novel coagulation method for direct coagulation casting of aqueous alumina slurries prepared using a poly(acrylate) dispersant J. Am. Ceram. Soc. 91 2008 615 619 (Pubitemid 351222497)
145. R.K. Kamboj, S. Dhara, and P. Bhargava Machining behaviour of green gelcast ceramics J. Eur. Ceram. Soc. 23 2003 1005 1011 (Pubitemid 36270385)
146. S.D. Nunn, and G.H. Kirby Green machining of gelcast ceramic materials Ceram. Eng. Sci. Proc. 17 1996 209 213
147. S. Dhara, R.K. Kamboj, and M. Pradhan Shape forming of ceramics via gelcasting of aqueous particulate slurries Bull. Mater. Sci. 25 2002 565 568
148. A.C. Young, O.O. Omatete, and M.A. Janney Gelcasting of alumina J. Am. Ceram. Soc. 74 1991 612 618
149. O.O. Omatete, M.A. Janney, and R.A. Strehlow Gelcasting - a new ceramic forming process Ceram. Bull. 70 1991 1641 1649
150. O.O. Omatete, T.N. Tieggs, and A.C. Young Gelcast reaction bonded silicon nitride composites Ceram. Eng. Sci. Proc. 12 1991 1257 1264
151. O.O. Omatete, A. Bleier, and C.G. Westmoreland Gelcast zirconia-alumina composites Ceram. Eng. Sci. Proc. 12 1991 2084 2094
152. M. Takahashi, and H. Unuma Gelcasting Ceram. Jpn. 32 1997 102 105
153. R.L. Whistler Industrial Gums 1973 Academic Press New York, NY pp. 45-68
154. I. Santacruz, M.I. Nieto, and R. Moreno Alumina bodies with near-to-theoretical density by aqueous gelcasting using concentrated agarose solutions Ceram. Int. 31 2005 439 445 (Pubitemid 40120625)
155. M. Potoczek Hydroxyapatite foams produced by gelcasting using agarose Mater. Lett. 62 2008 1055 1057 (Pubitemid 350299569)
156. M. Potoczek, A. Zima, and Z. Paszkiewicz Manufacturing of highly porous calcium phosphate bioceramics via gel-casting using agarose Ceram. Int. 35 2009 2249 2254
157. L.J. Vandeperre, A.M. DeWilde, and J. Luyten Gelatin gelcasting of ceramic components J. Mater. Process. Technol. 135 2003 312 316
158. L. Santacruz, M.I. Nieto, and R. Moreno Rheological characterization of synergistic mixtures of carrageenan and locust bean gum for aqueous gelcasting of alumina J. Am. Ceram. Soc. 85 2002 2432 2436 (Pubitemid 35296424)
159. A.J. Millan, M.I. Nieto, and R. Moreno Aqueous gel-forming of silicon nitride using carrageenans J. Am. Ceram. Soc. 84 2001 62 64 (Pubitemid 33642612)
160. Z.P. Xie, Y. Huang, and Y.L. Chen A new gelcasting of ceramics by reaction of sodium algnite and calcium iodateat increased temperatures J. Mater. Sci. Lett. 20 2001 1255 1257 (Pubitemid 32829665)
161. Z.P. Xie, X. Wang, and Y. Jia Ceramic forming based on gelation principle and process of sodium alginate Mater. Lett. 57 2003 1635 1641
162. X. Wang, Z.P. Xie, and Y. Huang Gelcasting of silicon carbide based on gelation of sodium alginate Ceram. Int. 28 2002 865 871 (Pubitemid 35220159)
163. H. Akhondi, E. Taheri-Nassaj, and H. Sarpoolaky Gelcasting of alumina nanopowders based on gelation of sodium alginate Ceram. Int. 35 2009 1033 1037
164. Y. Jia, Y. Kanno, and Z.P. Xie Fabrication of alumina green body through gelcasting process using alginate Mater. Lett. 57 2003 2530 2534
165. Y.K. Leong, and D.V. Boger Surface chemistry and rheological properties of zirconia suspensions J. Rheol. 35 1991 149 165
166. O.O. Omatete, M.A. Janney, and S.D. Nunn Gelcasting from laboratory development toward industrial production J. Eur. Ceram. Soc. 17 1997 407 413 (Pubitemid 127426138)
167. B. Waesche, and G. Steinborn Influence of slip viscosity on the mechanical properties of high purity alumina made by gelcasting Key Eng. Mater. 132-136 1997 374 377
168. E.S. Tormey, R.L. Pober, and H.K. Bowen Tape casting-future developments J.A. Mangels, G.L. Messing, Adv in Ceram, vol. 9, Forming of Ceramics 1984 Am. Ceram. Soc. Columbus, OH 140 149
169. M.A. Janney, S.D. Nunn, and C.A. Walls Gelcasting. The Handbook of Ceramic Engineering 1998 M Dekker Inc New York
170. J.M. Aguilera, and P.J. Lillford Structuring Water by Gelation, Food Materials Science Principles and Practice 2008 Springer New York 10.1007/978-0-387-71947-4-13
171. S Ghosal, A. Emami-Naeini, and Y.P. Ham A physical model for the drying of gelcast ceramics J. Am. Ceram. Soc. 82 1999 513 520
172. H. Guldberg-Pedersen, and L. Bergstrom Forces between zirconia surfaces in poly(acrylic acid) solutions J. Am. Ceram. Soc. 82 1999 1137 1145 (Pubitemid 129692864)
173. D. Hasselbarth, E. Tervoort, and C. Urban Mechanical properties of coagulated wet particle networks with alkali-swellable thickeners J. Am. Ceram. Soc. 84 2001 1689 1695 (Pubitemid 33670294)
174. W. Sigmund, J. Yanez, F. Aldinger, Eur Patent Application. PCT/EP98/03555 (1998)
175. E. Emad, Z. Abbas, and S. Wolfgang Temperature induced forming of zirconia from aqueous slurries: mechanism and rheology J. Eur. Ceram. Soc. 22 2002 2805 2812
176. Y.P. Yang, and W.M. Sigmund Expanded percolation theory model for the temperature induced forming (TIF) of alumina aqueous suspensions J. Eur. Ceram. Soc. 22 2002 1791 1799 (Pubitemid 34714517)
177. Y.P. Yang, and W.M. Sigmund Effects of calcium ion addition on dispersant adsorption in temperature induced forming (TIF) alumina slurry J. Mater. Sci. Lett. 20 2001 651 653 (Pubitemid 32615961)
178. L. Bergstrom, and E. Sjostrom Temperature induced gelation of concentrated ceramic suspensions: rheological properties J. Eur. Ceram. Soc. 19 1999 2117 2123 (Pubitemid 29429488)
179. L. Wang, and F. Aldinger Near-net shape forming of advanced ceramics Adv. Eng. Mater. 2 2000 110 113
180. B.H. Yoon, Y.H. Koh, and C.S. Park Generation of large pore channels for bone tissue engineering using camphene-based freeze casting J. Am. Ceram. Soc. 90 2007 1744 1752
181. S. Deville, E. Saiz, and A. Tomsia Freezing as a path to build complex composites Science 311 2006 515 518 (Pubitemid 43157728)
182. K. Araki, and J.W. Halloran New freeze-casting technique for ceramics with sublimable vehicles J. Am. Ceram. Soc. 87 2004 1859 1863
183. S. Deville, E. Saiz, and A.P. Tomsia Ice-templated porous alumina structures Acta Mater. 55 2007 1965 1974
184. K. Araki, and J.W. Halloran Porous ceramic bodies with interconnected pore channels by a novel freeze casting technique J. Am. Ceram. Soc. 88 2005 1108 1114 (Pubitemid 41557961)
185. S.W. Sofie, and F. Dogan Freeze casting of aqueous alumina slurries with glycerol J. Am. Ceram. Soc. 84 2001 1459 1464 (Pubitemid 33670154)
186. O.O. Omatete, M.A. Janney, and S.D. Nunn Gelcasting: from laboratory development toward industrial production J. Eur. Ceram. Soc. 17 1997 407 413 (Pubitemid 127426138)
187. D.X. Zhou, H. Li, and S.P. Gong Sodium bismuth titanate-based lead-free piezoceramics prepared by aqueous gelcasting J. Am. Ceram. Soc. 91 2008 2792 2796
188. T. Fukasawa, Z.Y. Deng, and T. Ohji Synthesis of porous silicon nitride with unidirectionally aligned channels using freeze-drying process J. Am. Ceram. Soc. 85 2002 2151 2155
189. Y.M. Zhang, L.Y. Hu, and J.C. Han Freeze casting of aqueous alumina slurries with glycerol for porous ceramics Ceram. Int. 36 2010 617 621
190. Y. Huang, L.G. Ma, and J.L. Yang Improving the homogeneity and reliability of ceramic parts with complex shapes by pressure-assisted gel-casting Mater. Lett. 58 2004 3893 3897
191. Y. Huang, J.H. Xiang, Z.P. Xie, The forming technique and equipment of spray trigger fast-curing for ceramics tape gel tape casting process, China Patent ZL00107495.4 (2002).
192. D.M. Liu Control of yield stress in low-pressure ceramic injection moldings Ceram. Int. 25 1999 587 592
193. J.L. Yang, L. Su, and L.G. Ma Colloidal injection moulding of ceramics Key Eng. Mater. 224-226 2002 667 672 (Pubitemid 35362221)
194. J.L. Yang, T. Ma, and L. Su Influence of pressure on gel-reaction of acrylamide monomer system Rare Metal Mater. Eng. 32 2003 147 150
195. J.L. Yang, Y. Huang, T. Ma, The method used for pressure-induced fast in site solidification of concentrated ceramic suspension, China Patent 200310100136.1 (2004).
196. T. Ma, Y. Huang, and J.L. Yang Fast uniform mixing and controllable colloidal forming of ceramics Z.Y. Zhang, H. Saka, T.H. Kim, Proceeding of the 5th Pacific Rim International Conference on Advanced Materials and Processing (PRICM-5), Part 2 2005 Trans Tech Publications Ltd Switzerland 1305 1308 (Pubitemid 40499756)