Studies on biocomposites based on pine needles and isocyanate adhesives

Journal of Biobased Materials and Bioenergy

Volumn 4, Issue 4, 2010, Pages 353-362

  Gupta, M ^a   Chauhan, Monika ^a   Khatoon, Naseeba ^a   Singh, B ^a  

^a CSIR CENTRAL BUILDING RESEARCH INSTITUTE   (India)

Author keywords

Biocomposites; Dimensional stability; Isocyanate adhesive; Pine needles; Treatment

Indexed keywords

ADHESIVE FAILURE; ADHESIVE-BONDED; BIO-COMPOSITES; COMMERCIAL STANDARDS; DIMENSIONAL CHANGES; DRY AND WET CONDITIONS; DRY CONDITION; FIBRE BREAKAGE; INTERNAL BONDS; ISOCYANATE ADHESIVES; LOSS MODULI; MATRIX INTERFACES; MECHANICAL PERFORMANCE; PHYSICOMECHANICAL PROPERTIES; PINE NEEDLE; PINE NEEDLES; PREPOLYMERS; PROPERTIES OF COMPOSITES; PULL-OUT; THERMAL STABILITY; TREATMENT; WET CONDITIONS;

MECHANICAL PROPERTIES; NEEDLES; STEAM; THERMODYNAMIC STABILITY;

DIMENSIONAL STABILITY;

EID: 79955374216     PISSN: 15566560     EISSN: 15566579     Source Type: Journal    
DOI: 10.1166/jbmb.2010.1100     Document Type: Article

References (39)

1. F. A. Riccio, Jr. and L. P. Orchard, Non-wood fibre resources: Availability, infrastructure and feasibility, Proceedings of the 5th International Conference on Wood Fibre-Plastic Composites, Madison, Wisconsin, May (1999), p. 211.
2. J. L. Bowyer and V. E. Stockmann, Forest Prod. J. 51, 10 (2001).
3. D. D. Stokke, Alternative low-cost biomass for the biocomposites industry, Book of Natural Fibres, Biopolymers and Biocomposites, edited by A. K. Mohanty, M. Misra, and L. T. Drzal, CRC Press, Taylor & Francis Group, Boca Raton (2005), pp. 159-175.
4. J. A. Youngquist, H. Speltor, B. E. English, and S. Chow, Agricultural fibres in composite panels, Proceedings of the 27th International Particle Boards/Composite Symposium, Washington State University, Pullman, WA (1993), p. 133.
5. A. Papadopoulos, T. Merou, V. Kazana, and M. Lazaridou, Potential of using coconut chips as a raw ligno-cellulosic materials for composite production, Proceedings 6th Global Wood and Natural Fibres Composites Symposium, Kassel, Germany, April (2006), p. 12.
6. M. Muthoo, Wood News 15, 18 (2006).
7. A. H. Grigoriou, Wood Sci. Technol. 34, 355 (2000).
8. H. D. Rozman, H. Ismail, R. M. Jaffri, A. Aminullah, and Z. A. M. Ishak, Intl. J. Polym. Mater. 39, 161 (1998).
9. I. O. Salyar and A. M. Usmani, Ind. Eng. Chem. Prod. Res. Dev. 21, 17 (1982).
10. D. Wang and X. Sun, Ind. Crops Prod. 15, 43 (2002).
11. X. Mo, J. Hu, X. S. Sun, and J. A. Ratto, Ind. Crops Prod. 14, 1 (2001).
12. N. Boquillon, G. Elbez, and U. Schonfeld, J. Wood Sci. 50, 230 (2004).
13. Y. Zheng, Z. Pan, R. Zhang, B. M. Jenkins, and S. Blunk, Bioresour. Technol. 98, 1304 (2007).
14. G. Han, K. Umemura, S. Kawai, and H. Kajita, J. Wood Sci. 45, 299 (1999).
15. S. Munawar, K. Umemura, and S. Kawai, J. Wood Sci. 54, 369 (2008).
16. J. A. Velasquez, F. Ferrando, X. Farriol, and J. Salvado, Wood Sci. Technol. 37, 269 (2003).
17. M. G. Jackson, Feed Sci. Technol. 2, 105 (1977).
18. G. Nemli, S. Yildiz, and E. D. Gezer, Bioresour. Technol. 99, 6054 (2008).
19. A. S. Schmidt, S. Mallon, A.B. Thomson, S. Hvilsted, and J. M. Lawther, J. Wood Chem. Technol. 22, 39 (2002).
20. X. Mo, E. Cheng, D. Wang, and X. S. Sun, Ind. Crops, Prod. 18, 47 (2003).
21. J. Zucaro and R. Reen, Proceedings of 29th International Symposium of Washington State University on Particle Boards/Composite Materials, Washington State University, Pullman, WA (1995), p. 225.
22. C. Hse and E. Choong, Bonding of rice husk/wood composites, Presented at the (IUFRO) Forest Products for Sustainable Forestry, Washington State University, Pullman, WA, USA (1997).
23. T. M. Gruver and N. R. Brown, Bioresources 1, 233 (2006).
24. K. Umemura, A. Takahashi, and S. Kawai, J. Wood Sci. 44, 204 (1998).
25. A. N. Papadopoulos, C. A. S. Hill, E. Traboulay, and J. R. B. Hague, Holz als Roh - und Werkstoff 60, 81 (2002).
26. J. P. Walsh, Isocyanate bonded wood composite and method of manufacturing the same, US Patent 5,344,484, September (1994).
27. K. Umemura and S. Kawai, J. Wood Sci. 48, 25 (2002).
28. M. F. Sonnenschein and B. L. Wendt, Wood Sci. Technol. 39, 27 (2005).
29. S. K. Nath, Green building material from agro and forest residue, Proceedings of the International Seminar on Waste to Wealth, New Delhi, November (2009), pp. 215-219.
30. E. T. Howard, Forest Prod. J. 24, 50 (1974).
31. R. C. Gupta, S. P. Singh, and S. N. Nautiyal, IPIRI. J. 7, 30 (1977).
32. C. Piao, T. F. Shupe, C. Y. Hse, and J. Tang, Biocomposites made from pine straw, Proceedings the 7th Pacific Rim Bio-Based Composites Symposium, Nanjing, China, October-November (2004), p. 288.
33. G. Nemli and A. Aydin, Indus. Crops and Prod. 26, 252 (2007).
34. A. K. Mohanty, M. Misra, and L. T. Drzal (eds.), Natural Fibres, Biopolymers and Biocomposites, CRC press, Taylor & Francis Group, Boca Raton (2005).
35. B. Singh, M. Gupta, M. Chauhan, and N. Khatoon, A process for the manufacture of pine needle-isocyanate prepolymer composite boards/panels and products thereof, Indian Patent 0023NF (2010), (Filed).
36. J. Wu and B. M. Gatewood, Bleaching of wheat straw, an alternative cellulosic (hard) fibre for potential industrial application, Proceedings of International Conference and Exhibition of the American Association of Textile Colorist and Chemists (1998), pp. 58-67.
37. M. Gupta, M. Chauhan, N. Khatoon, and B. Singh, J. Appl. Polym. Sci. in press.
38. S. Kawai and S. Sasaki, Low Density Particle Board in Recent Research on Wood and Wood Based Materials, edited by N. Shiraishi, H. Kajita, and M. Norimoto, Elsevier, London (1993), pp. 33-12.
39. IS: 3087 (2005) Indian Standard Particle boards of wood and other lignocellulosic materials (medium density) for general purposes-Specification (Indian Standard Institutions, New Delhi - 110002).