Exploring potential of Micro-Raman spectroscopy for correlating graphitic distortion in carbon fibers with stresses in erosive wear studies of PEEK composites

Wear

Volumn 270, Issue 11-12, 2011, Pages 791-799

  Sharma, Mohit ^a   Bijwe, Jayashree ^a   Singh, Kuldeep ^a   Mitschang, Peter ^b  

^a INDIAN INSTITUTE OF TECHNOLOGY DELHI   (India)

^b INSTITUT FÜR VERBUNDWERKSTOFFE GMBH   (Germany)

Author keywords

Micro Raman analysis; Plasma treatment of fibers; Polymer matrix composite; Solid particle erosion

Indexed keywords

CARBON FABRICS; ELEVATED TEMPERATURE; EROSIVE WEAR; FIBER-MATRIX ADHESION; GOOD CORRELATIONS; HIGH TEMPERATURE; MICRO RAMAN SPECTROSCOPY; MICRO-RAMAN ANALYSIS; PLASMA TREATMENT; SEM; SEM STUDY; SOLID PARTICLE EROSION; WEAR MECHANISMS; WEAR RATES;

CARBON FIBERS; EROSION; FIBERS; MECHANICAL PROPERTIES; NITROGEN PLASMA; OXYGEN; PLASMA APPLICATIONS; RAMAN SCATTERING; RAMAN SPECTROSCOPY; STRAIN RATE; TRIBOLOGY; WEAR OF MATERIALS; WEAR RESISTANCE;

POLYMER MATRIX COMPOSITES;

EID: 79954954314     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2011.02.002     Document Type: Article

References (37)

1. Patnaik A., Satapathy A., Chand N., Barkoula N.M., Biswas S. Solid particle erosion wear characteristics of fiber and particulate filled polymer composites: a review. Wear 2010, 268:249-263.
2. Suresh A., Harsha A.P., Ghosh M.K. Solid particle erosion of unidirectional fibre reinforced thermoplastic composites. Wear 2009, 267:1516-1524.
3. Zahavi J., Schmitt G.F. Solid particle erosion of reinforced composite materials. Wear 1981, 71:179-190.
4. Tilly G.P., Sage W. The interaction of particle and material behavior in erosion processes. Wear 1970, 16:447-465.
5. Parvai M.R., Mohanty S., Nayakand S.K., Mahanwar P.A. Polyetheretherketone (PEEK) composites reinforced with fly ash and mica. J. Min. Mater. Charact. Eng. 2010, 9(1):25-41.
6. Rattan R., Bijwe J. Carbon fabric reinforced polyetherimide composites: influence of weave of fabric and processing parameters on performance properties and erosive wear. Mater. Sci. Eng. Part A 2006, 420(1-2):342-350.
7. Stachowiak G.W., Batchelor A.W. Engineering Tribology. Tribology Series 1993, vol. 24. Elsevier, Amsterdam, The Netherlands.
8. Kharde Y.R., Saisrinadh K.V. Effect of particle velocity, temperature and impingent angle on the erosive wear behavior of polymer matrix composites. Int. J. App. Eng. Res. 2008, 3(12).
9. Roy M., Vishwanathan B., Sundararajan G. The solid particle erosion of polymer matrix composites. Wear 1994, 171:149-161.
10. Sullivan P.L., Lu G. Erosion of impact-notched holes in GFRP composites. Wear 1994, 176:81-88.
11. Tewari U.S., Harsha A.P., Häger A.M., Friedrich K. Solid particle erosion of unidirectional carbon fibre reinforced polyetheretherketone composites. Wear 2002, 252:992-1000.
12. Ye L., Friedrich K., Kastel J., Mai Y.M. Consolidation of unidirectional CF/PEEK composites from commingled yarn prepreg. Comp. Sci. Technol. 1995, 54:349-358.
13. Ye L., Daghyani H.R. Sliding friction and wear of carbon fibre-polyetheretherketone commingled yarn composites against steel. J. Mater. Sci. Lett. 1996, 15:1536-1538.
14. Friedrich K. Advances in Composites Tribology 1993, Elsevier Scientific Publishers, Amsterdam.
15. Li R., Ye L., Mai W. Application of plasma technologies in fibre-reinforced polymer composites: a review of recent developments. Comp. Part A 1997, 28:73-86.
16. Jang J., Yang H. The effect of surface treatment on the performance improvement of carbon fiber/polybenzoxazine composites. J. Mater. Sci. 2000, 35:2297-2303.
17. Guo F., Zhang Z., Liu W., Su F., Zhang H. Effect of plasma treatment of Kevlar fabric on the tribological behavior of Kevlar fabric/phenolic composites. Tribol. Int. 2009, 42:243-249.
18. Sua F., Zhang Z., Wang K., Jiang W., Liu W. Tribological and mechanical properties of the composites made of carbon fabrics modified with various methods. Comp. Part A 2005, 36:1601-1607.
19. Sharma M., Tiwari S., Bijwe J. Optimization of material parameters for development of polyetherimide composites. Mater. Sci. Eng. B 2010, 168:55-59.
20. Tiwari S., Sharma M., Panier S., Mutel B., Mitschang P., Bijwe J. Influence of cold remote nitrogen oxygen plasma treatment on carbon fabric and its composites with specialty polymers. J. Mater. Sci. 2011, 46:964-974.
21. Sarraf H., Škarpová L., Louda P. Surface modification of carbon fibers. J. Achieve. Mater. Manuf. Eng. 2007, 25(2):24-30.
22. Montes-Morán M.A., Young R.J. Raman spectroscopy study of high-modulus carbon fibres: effect of plasma-treatment on the interfacial properties of single-fibre-epoxy composites Part II: characterisation of the fibre-matrix interface. Carbon 2002, 40:857-875.
23. Gong Q.M., Li Z., Zhang Z., Wu B., Zhou X., Huang Q.Z., Liang J. Tribological properties of carbon nanotube-doped carbon/carbon composites. Tribol. Int. 2006, 39:937-944.
24. Lim D.S., An J.W., Lee H.J. Effect of carbon nanotube addition on the tribological behavior of carbon/carbon composites. Wear 2002, 252:512-517.
25. Mutel B., Bigan M., Vezin H. Remote nitrogen plasma treatment of a polyethylene powder: optimisation of the process by composite experimental designs. App. Surf. Sci. 2004, 239:25-35.
26. Hutchings I.M. Particle erosion of ductile metals: a mechanism of materials removal. Wear 1974, 27:121.
27. Sari N., Sinmazcelik T. Erosive wear behaviour of carbon/fiber polyetherimide composite under low particle speed. Mater. Design 2007, 28(1):351-355.
28. Dresselhaus M.S., Jorio A., Saito R. Characterizing graphene, graphite, and carbon nanotubes by Raman spectroscopy. Annu. Rev. Condens. Matter Phys. 2010, 1:89-108.
29. Zhao Q., Wagner H.D. Raman spectroscopy of carbon-nanotube-based composites. Phil. Trans. R. Soc. Lond. A 2004, 362:2407-2424.
30. Bucci D.V., Koczak M.J., Schadler S. Micromechanical investigations of unidirectional carbon/carbon composites via Micro-Raman spectroscopy. Carbon 1997, 35(2):235-245.
31. Young R.J., Day R.J., Zakikhani M., Robinson I.M. Fibre deformation and residual thermal stresses in carbon fibre reinforced PEEK. Comp. Sci. Technol. 1989, 34:243-258.
32. Shin J.K., Lee C.S., Lee K.R., Eun K.Y. Effect of residual stress on the Raman-spectrum analysis of tetrahedral amorphous carbon films. Appl. Phys. Lett. 2001, 78:631-633.
33. Montes-Morán M.A., Young R.J. Raman spectroscopy study of HM carbon fibres: effect of plasma treatment on the interfacial properties of single fibre/epoxy composites Part I: fibre characterization. Carbon 2002, 40:845-855.
34. Cuesta A., Dhamelincourt P., Laureyns J., Martínez-Alonso A., Tascon J.M.D. Effects of various treatments on carbon fiber surfaces studied by Raman microprobe spectrometry. Appl. Spectrosc. 1998, 52:356-360.
35. Tuinstra F., Koenig J.L. Raman spectrum of graphite. J. Chem. Phys. 1970, 53:1126-1130.
36. Chaudhuri S.N., Chaudhuri R.A., Benner R.E., Pneumonia M.S. Raman spectroscopy for characterization of interfacial debonds between carbon fibers and polymer matrices. Comp. Struct. 2006, 76(4):375-387.
37. Meyer N., Marx G., Brzezinka K.W. Raman spectroscopy of carbon fibres. Fresen. J. Anal. Chem. 1994, 349(1-3):167-168.