Characterization and dissolution of functionalized amorphous calcium phosphate biolayers using single-splat technology

Acta Biomaterialia

Volumn 7, Issue 5, 2011, Pages 2270-2275

  Gross, Karlis A ^a,b   Young, Cara J ^b   Beck, Mardi A ^b   Keebaugh, Ezra W ^b   Bronts, Thomas J ^b   Saber Samandari, Saeed ^b   Riley, Daniel P ^b  

^a RIGA TECHNICAL UNIVERSITY   (Latvia)

^b UNIVERSITY OF MELBOURNE   (Australia)

Author keywords

Amorphous calcium phosphate; Microfabrication; Printing; Solubility; Splat

Indexed keywords

CALCIUM PHOSPHATE; CRACKS; DELAMINATION; DISSOLUTION; FAILURE (MECHANICAL); SOLIDIFICATION; SOLUBILITY;

AMORPHOUS CALCIUM PHOSPHATE; BIOLAYERS; CHARACTERIZATION TECHNIQUES; FUNCTIONALIZED; HYDROXYAPATITE PARTICLES; MULTIFUNCTIONALITY; PERFORMANCE; PROCESSING ROUTE; SINGLE SPLATS; SPLAT;

HYDROXYAPATITE;

CALCIUM PHOSPHATE; HYDROXYAPATITE;

ARTICLE; DEPRESSION; DISSOLUTION; PRIORITY JOURNAL; TOPOGRAPHY;

EID: 79953867791     PISSN: 17427061     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.actbio.2011.01.020     Document Type: Article

References (32)

1. Fernandez J, Gaona M, Guilemany JM. Effect of heat treatments on HVOF hydroxyapatite coatings. J Thermal Spray Technol 2007;16:220-8. (Pubitemid 47422575)
2. Gross KA, Berndt CC. Thermal processing of hydroxyapatite for coating production. J Biomed Mater Res 1998;39:580-7. (Pubitemid 28079721)
3. Khor KA, Li H, Cheang P. Significance of melt-fraction in HVOF sprayed hydroxyapatite particles, splats and coatings. Biomaterials 2004;25:1177-86. (Pubitemid 37476195)
4. Li H, Khor KA, Cheang P. Thermal sprayed hydroxyapatite splats: nanostructures, pore formation mechanisms and TEM characterization. Biomaterials 2004;25:3463-71. (Pubitemid 38331990)
5. Saber-Samandari S, Gross KA. The use of thermal printing to control the properties of calcium phosphate deposits. Biomaterials 2010;31:6386-93.
6. Aziz SD, Chandra S. Impact, recoil and splashing of molten metal droplets. Int J Heat Mass Transfer 2000;43:2841-57. (Pubitemid 30306499)
7. Mueller D. Topographical control of hydroxyapatite for orthopaedics. Diploma thesis. Technical University of Munich; 2004.
8. Pershin V, Lufita M, Chandra S, Mostaghimi J. Effect of substrate temperature on adhesion strength of plasma-sprayed nickel coatings. J Thermal Spray Technol 2003;12:370-6.
9. Li H, Ng BS, Khor KA, Cheang P, Clyne TW. Raman spectroscopy determination of phases within thermal sprayed hydroxyapatite splats and subsequent in vitro dissolution examination. Acta Mater 2004;52:445-53.
10. Khor KA, Li H, Cheang P. Dissolution behaviors of thermal sprayed calcium phosphate splats in simulated body fluid. Key Engin Mater 2004;254-2:315-8.
11. Khor KA, Li H, Cheang P, Boey SY. In vitro behavior of HVOF sprayed calcium phosphate splats and coatings. Biomaterials 2003;24:723-35.
12. Gross KA, Walsh WR, Swarts E. Analysis of retrieved hydroxyapatite-coated hip prostheses. J Thermal Spray Technol 2004;13:190-9.
13. Gross KA, Ray N, Rokkum M. The contribution of coating microstructure to degradation and particle release in hydroxyapatite coated prostheses. J Biomed Mater Res 2002;63:106-14. (Pubitemid 34263853)
14. Saber-Samandari S, Berndt CC, Gross KA. Selection of the implant and coating materials for optimized performance by means of nanoindentation. Acta Biomater 2011;7:874-81.
15. Li H, Khor KA, Cheang P. Effect of the powders' melting state on the properties of HVOF sprayed hydroxyapatite coatings. Mater Sci Eng 2000;A293:71-80.
16. Schroll RD, Josserand C, Zaleski S, Zhang WW. Impact of a viscous liquid drop. Phys Rev Lett 2010;104:034504.
17. Chandra S, Avedisian CT. On the collision of a droplet with a solid surface. Proc R Soc Lond 1991;432:13-41.
18. Gross KA, Muller D, Lucas H, Haynes D. Design of topography on thermal spray hydroxyapatite coatings impacts the cell response. Acta Biomater, submitted for publication.
19. Gross KA, Saber-Samandari S. Evaluation of commercial implants with nanoindentation defines future development needs for hydroxyapatite coatings. J Biomed Mater Res 2010;93:1-8.
20. Chraska T, King AH. Transmission electron microscopy study of rapid solidification of plasma sprayed zirconia - Part 1. First splat solidification. Thin Solid Films 2001;397:30-9. (Pubitemid 32975719)
21. Mao T, Kuhn DCS, Tran HV. Spread and rebound of liquid droplet upon impact on flat surfaces. AIChE J 1997;43:2169-79.
22. de Ruiter J, Pepper RE, Stone HA. Thickness of the rim of an expanding lamela near the splash threshold. Phys Fluids 2010;22:022104.
23. Yarin AL. Drop impact dynamics: splashing, spreading, receding, bouncing. Annu Rev Fluid Mech 2006;38:159.
24. Montavon G, Sampath S, Berndt CC, Herman H, Coddet C. Effects of the spray angle on splat morphology during thermal spraying. Surf Coat Tech 1997;91:107-15. (Pubitemid 127427818)
25. Benaqqa C, Chevalier J, Saadaoui M, Fantozzi G. Slow crack growth behaviour of hydroxyapatite ceramics. Biomaterials 2005;26:6106-12. (Pubitemid 40826978)
26. de With G, van Dijk HJA, Hattu N, Prijs K. Preparation, microstructure and mechanical properties of dense polycrystalline hydroxyapatite. J Mater Sci 1981;16:1592-8. (Pubitemid 12502440)
27. Yang YC, Chang E, Lee SY. Mechanical properties and Young's modulus of plasma-sprayed hydroxyapatite coating on Ti substrate in simulated body fluid. J Biomed Mater Res 2003;67A:886-99. (Pubitemid 37521563)
28. Gross KA, Berndt CC. In vitro behaviour of hydroxyapatite plasma sprayed coatings. J Mater Sci Mater Med 1994;5:219-24.
29. Li P, Feng X, Jia X, Fan Y. Influences of tensile load on in vitro degradation of an electrospun poly(L-lactive-co-glycolide) scaffold. Acta Biomater 2010;6:2991-6.
30. Caves JM, Chaikof EL. The evolving impact of microfabrication and nanotechnology on stent design. J Vasc Surg 2006;44:1363-8. (Pubitemid 44828420)
31. Loya MC, Brammer KS, Choi C, Chen L-H, Jin S. Plasma-induced nanopillars on bare metal coronary stent surface for enhanced endothelialization. Acta Biomater 2010;6:4589-95.
32. Meirelles L, Currie F, Jacobsson M, Albrektsson T, Wennerberg A. The effect of chemical and nanotopographical modifications on the early stages of osseointegration. Int J Oral Maxillofac Implants 2008;23:641-7.