Development and evaluation of on-board measurement system for nanoparticle emissions from diesel engine

Aerosol Science and Technology

Volumn 45, Issue 5, 2011, Pages 570-580

  Barrios, Carmen Cecilia ^a   Dominguez Saez, Aida ^a   Rubio, Jose Rafael ^b   Pujadas, Manuel ^a  

^a CIEMAT   (Spain)

^b UNIVERSIDAD POLITÉCNICA DE MADRID   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

CLOSED CIRCUIT; DIESEL VEHICLES; DILUTION RATIO; ENGINE EXHAUST; EXPERIMENTAL SETUP; MADRID , SPAIN; MEASUREMENT OF PARTICLES; ON-BOARD EQUIPMENT; ON-BOARD MEASUREMENTS; ON-BOARD SYSTEMS; PARTICLE EMISSIONS; PHYSICAL CHARACTERISTICS; REAL TIME; SAMPLING POINTS; TRANSFER LINES; URBAN TRAFFIC;

EXHAUST SYSTEMS (ENGINE);

DIESEL ENGINES;

NANOPARTICLE;

ARTICLE; DIESEL ENGINE; DYNAMOMETER; EXHAUST GAS; MEASUREMENT; PARTICLE SIZE; PRIORITY JOURNAL; REPRODUCIBILITY; SPAIN; TRAFFIC; URBAN AREA;

EID: 79953703165     PISSN: 02786826     EISSN: 15217388     Source Type: Journal    
DOI: 10.1080/02786826.2010.550963     Document Type: Article

References (29)

1. Akard, M., Nakamura, H., Shintaro, A., Kihara, N., and Adachi, M. (2005). Performance Results and Design Considerations for a New In-Use Testing Instrument. SAE Paper. 2005-01-3606.
2. Ahlvik, P., Ntziachristos, L., Keskinen, J., and Virtanen, A. (1998). Real Time Measurements of Diesel Particle Size Distribution with an Electrical Low Pressure Impactor. SAE Paper. 980410.
3. Armas, O., Gómez, A., and Herreros, J. M. (2007). Uncertainties in the Determination of Particle Size Distributions Using a Mini Tunnel-SMPS System During Diesel Engine Testing. Meas. Sci. Technol. 18:2121-2130. (Pubitemid 46950792)
4. Bergmann, M., Kirchner, U., Vogt, R., and Benter, T. (2009). On-Road and Laboratory Investigation of Low-Level PM Emissions of a Modern Diesel Particulate Filter Equipped Diesel Passenger Car. Atmos. Environ. 43:1908-1916.
5. Bergmann, M., Scheer, V., Vogt, R., and Benter, T. (2007). Comparison of the Performance of Real-Time PM Mass and Number Instrumentation for Vehicle Exhaust Emissions. SAE Paper. 2007-24-0116.
6. Burtscher, H. (2005). Physical Characterization of Particulate Emissions from Diesel Engines: A Review. J. Aerosol Sci. 36:896-932. (Pubitemid 40800468)
7. Cheng, Y. S. (1993). Condensation Detection and Diffusion Size Separation Techniques, in Aerosol Measurement: Principles, Techniques, and Applications, P. A. Baron and K. Willeke, eds., Van Nostrand Reinhold, New York, pp. 435-436.
8. Cocker, III, D. R., Shah, S. P., Johnson, K., Miller, J. W., and Norbeck, J. M. (2004).Development and Application of a Mobile Laboratory forMeasuring Emissions from Diesel Engines. 1. Regulated Gaseous Emissions. Environ. Sci. Technol. 38:2182-2189. (Pubitemid 38468822)
9. Desantes, J. M., Bermúdez, V., Pastor, J. V., and Fuentes, E. (2004). Methodology for Measuring Exhaust Aerosol Size Distributions from Heavy Duty Diesel Engines by Means of Scanning Mobility Particle Sizer. Meas. Sci. Technol. 15:2083-2098. (Pubitemid 39375786)
10. Domínguez, A., Rubio, J. R., and Barrios, C. C. (2009). Influence of Road Traffic Conditions and Street Characteristics in Madrid City on Nanoparticle Vehicular Emissions [Abstract T083A20]. European Aerosol Conf. 2009, Karlsruhe, Germany.
11. Friedlander, S. K. (2000). Smoke, Dust, and Haze: Fundamentals of Aerosol Dynamics. 2nd ed., Oxford University Press, New York, p. 23.
12. Hinds,W. (1999). Aerosol Technology: Properties, Behaviors, and Measurement of Airborne Particles. John Wiley & Sons, New York, p. 146.
13. Kasper, M. (2004). The Number Concentration of Non-Volatile Particles-Design Study for an Instrument According to the PMP Recommendations. SAE Paper. 2004-01-0960.
14. Kim, D., Gautam, M., and Gera, D. (2002). Parametric Studies on the Formation of Diesel Particulate Matter via Nucleation and Coagulation Modes. J. Aerosol Sci. 33:1609-1621. (Pubitemid 35375925)
15. Kittelson, D. B. (1998). Engines and Nanoparticles: A Review. J. Aerosol Sci. 29:575-588. (Pubitemid 28263564)
16. Kittelson, D. B., Arnold, M., and Watts, W. F. (1999). Review of Diesel Particulate Matter Sampling Methods. Final Report, University of Minnesota.
17. Lüders, H., Krüger, M., Stommel, P., and Lüers,B. (1998). The Role of Sampling Conditions in Particle Size Distribution Measurements. SAE Paper. 981374.
18. Maricq, M. M., Podsiadlik, D. H., and Chase, R. E. (1999). Examination of the Size-Resolved and Transient Nature of Motor Vehicle Particle Emissions. Environ. Sci. Technol. 33:1618-1626. (Pubitemid 29232893)
19. Mohr, M., Forss, A. M., and Lehmann, U. (2006). Particle Emissions from Diesel Passenger Cars Equipped with a Particle Trap in Comparison with other Technologies. Environ. Sci. Technol. 40:2375-2383.
20. Ntziachristos, L., Mamakos, A., Samaras, Z.,Mathis, U., Mohr,M., Thompson, N., Stradling, R., Forti, L., and De Serves, C. (2004). Overview of the European "Particulates" Project on the Characterization of Exhaust Particulate Emissions from Road Vehicles: Results for Light-Duty Vehicles. SAE Paper. 2004-01-1985.
21. Rubio, J. R., Domínguez, A., and Barrios, C. C. (2009). Design and Implementation of an On-Board Real Time Particle Measurement System [Abstract T083A21]. European Aerosol Conf. 2009, Karlsruhe, Germany.
22. Shi, J. P., Harrison, R. M., and Brear, F. (1999). Particle Size Distribution from a Modern Heavy Duty Diesel Engine. Sci. Total Environ. 235:305-317.
23. Uhrner, U., von Löwis, S., Vehkamäki, H., Wehner, B., Bräsel, S., Hermann, M., Stratmann, F., Kulmala, M., and Wiedensohler, A. (2007). Dilution and Aerosol Dynamics within a Diesel Car Exhaust Plume-CFD Simulations of On-Road Measurement Conditions. Atmos. Environ. 41:7440-7461. (Pubitemid 350052646)
24. Vedal, S. (1997). Ambient Particles and Health: Lines that Divide. J. Air Waste Manag. Assoc. 47:551-581. (Pubitemid 27203476)
25. Vogt, R., Scheer, V., Casati, R., and Benter, T. (2003). On-Road Measurement of Particle Emission in the Exhaust Plume of a Diesel Passenger Car. Environ. Sci. Technol. 37:4070-4076. (Pubitemid 37108290)
26. Wang, J., Storey, J., Domingo, N., Huff, S., Thomas, J., and West, B. (2006). Studies of Diesel Engine Particle Emissions during Transient Operations Using an Engine Exhaust Particle Sizer. Aerosol Sci. Technol. 40:1002-1015.
27. Weaver, C. S., and Petty, L. E. (2004). Reproducibility and Accuracy of On-Board Emission Measurements Using the RAVEMTM System. SAE Paper. 2004-01-0965.
28. Wehner, B., Uhrner, U., von Löwis, S., Zallinger, M., and Wiedensohler, A. (2009). Aerosol Number Size Distributions within the Exhaust Plume of a Diesel and a Gasoline Passenger Car under On-Road Conditions and Determination of Emission Factors. Atmos. Environ. 43:1235-1245.
29. Zervas, E., and Dorlhene, P. (2006). Comparison of Exhaust Particle Number Measured by EEPS, CPC, and ELPI. Aerosol Sci. Technol. 40:977-984. (Pubitemid 44147734)