Microplane model for fracturing damage of triaxially braided fiber-polymer composites

Journal of Engineering Materials and Technology

Volumn 133, Issue 2, 2011, Pages

  Caner, Ferhun C ^a   Bažant, Zdeněk P ^a   Hoover, Christian G ^b   Waas, Anthony M ^c   Shahwan, Khaled W ^d  

^a NORTHWESTERN UNIVERSITY   (United States)

^b Northwestern University   (United States)

^c UNIVERSITY OF MICHIGAN   (United States)

^d CENTRO RICERCHE FIAT   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

ABAQUS; COMPOSITE MATERIALS; STRESS-STRAIN CURVES;

CONSTITUTIVE BEHAVIORS; EXPLICIT FINITE ELEMENT CODES; FRACTURING BEHAVIORS; INELASTIC PHENOMENA; MATERIAL CHARACTERISTICS; MULTI-SCALE MODELING; POST-PEAK BEHAVIORS; TRIAXIALLY BRAIDED;

FRACTURE;

COMPOSITES; FINITE ELEMENT ANALYSIS; STRESSES;

EID: 79953247857     PISSN: 00944289     EISSN: 15288889     Source Type: Journal    
DOI: 10.1115/1.4003102     Document Type: Article

References (52)

1. Cox, B. N., Dadkhah, M. S., Morris, W. L., and Flintoff, J. G., 1994, "Failure Mechanisms of 3D Woven Composites in Tension, Compression, and Bending," Acta Metall. Mater., 42, pp. 3967-3984.
2. Quek, S. C., Waas, A. M., Shahwan, K. W., and Agaram, V., 2004, "Compressive Response and Failure of Braided Textile Composites: Part 1 Experiments," Int. J. Non-Linear Mech., 39(4), pp. 635-648.
3. Song, S., Waas, A. M., Shahwan, K. W., Xiao, X., and Faruque, O., 2007, "Braided Textile Composites Under Compressive Loads: Modeling the Response, Strength and Degradation," Compos. Sci. Technol., 67(15-16), pp. 3059-3070. (Pubitemid 47560019)
4. Chou, T.-W., 1992, Microstructural Design of Fiber Composites, Cambridge Solid State Science Series, Cambridge University Press, Cambridge, UK.
5. Dadkhah, M. S., Cox, B. N., and Morris, W. L., 1995, "Compression- Compression Fatigue of 3D Woven Composites," Acta Metall. Mater., 43(12), pp. 4235-4245.
6. Bažant, Z. P., and Cedolin, L., 1991, Stability of Structures, Oxford University Press, Oxford, NY and (3rd Ed., World Scientific Publishing, Singapore and London, 2010).
7. Bažant, Z. P., 1968, "Effect of Folding of Reinforcing Fibers on the Elastic Moduli and Strength of Composite Materials," Mekh. Polim., 4, pp. 314-321 (in Russian).
8. Waas, A. M., and Schultheisz, C. R., 1996, "Compressive Failure of Composites, Part II: Experimental Studies," Prog. Aerosp. Sci., 32(1), pp. 43-78. (Pubitemid 126348964)
9. Quek, S. C., Waas, A. M., Shahwan, K. W., and Agaram, V., 2003, "Analysis of 2D Triaxial Flat Braided Textile Composites," Int. J. Mech. Sci., 45, pp. 1077-1096.
10. Quek, S. C., Waas, A. M., Shahwan, K. W., and Agaram, V., 2003, "Compressive Response and Failure of Braided Textile Composites: Part 2-Computations," Int. J. Non-Linear Mech., 39(4), pp. 650-663.
11. Whitcomb, J. M., and Noh, J., 2000, "Concise Derivation of Formulas for 3D Sublaminate Homogenization," J. Compos. Mater., 34, pp. 522-535. (Pubitemid 30582597)
12. Sankar, B. V., and Marrey, R. V., 1993, "A Unit-Cell Model of Textile Composite Beams for Predicting Stiffness Properties," Compos. Sci. Technol., 49, pp. 61-69.
13. Bažant, Z. P., Adley, M. D., Carol, I., Jirásek, M., Akers, S. A., Rohani, B., Cargile, J. D., and Caner, F. C., 2000, "Large-Strain Generalization of Microplane Model for Concrete and Application," J. Eng. Mech., 126(9), pp. 971-980.
14. Bažant, Z. P., Caner, F. C., Carol, I., Adley, M. D., and Akers, S. A., 2000, "Microplane Model M4 for Concrete: I. Formulation With Work-Conjugate Deviatoric Stress," J. Eng. Mech., 126(9), pp. 954-961.
15. Bažant, Z. P., Caner, F. C., Adley, M. A., and Akers, S. A., 2000, "Incorporation of Rate Effects of Fracturing and Creep Into Microplane Model for Concrete Dynamics," J. Eng. Mech., 126(9), pp. 962-970.
16. Bažant, Z. P., and Ožbolt, J., 1990, "Nonlocal Microplane Model for Fracture, Damage, and Size Effect in Structures," J. Eng. Mech., 116(11), pp. 2484-2504.
17. Bažant, Z. P., and Prat, P. C., 1988, "Microplane Model for Brittle Plastic Material: I. Theory," J. Eng. Mech., 114, pp. 1672-1688.
18. Bažant, Z. P., and Prat, P. C., 1988, "Microplane Model for Brittle Plastic Material: II. Verification," J. Eng. Mech., 114, pp. 1689-1702.
19. Bažant, Z. P., and Oh, B.-H., 1983, "Microplane Model for Fracture Analysis of Concrete Structures," Proceedings of the First International Symposium on the Interaction of Non-Nuclear Munitions With Structures, U.S. Air Force Academy, Colorado Springs, CO, pp. 49-53.
20. Bažant, Z. P., and Oh, B.-H., 1985, "Microplane Model for Progressive Fracture of Concrete and Rock," J. Eng. Mech., 111, pp. 559-582.
21. Bažant, Z. P., and Oh, B.-H., 1986, "Efficient Numerical Integration on the Surface of a Sphere," ZAMM, 66(1), pp. 37-49.
22. Carol, I., and Bažant, Z. P., 1997, "Damage and Plasticity in Microplane Theory," Int. J. Solids Struct., 34(29), pp. 3807-3835.
23. Carol, I., Bažant, Z. P., and Prat, P. C., 1991, "Geometric Damage Tensor Based on Microplane Model," J. Eng. Mech., 117(10), pp. 2429-2448. (Pubitemid 21693354)
24. Brocca, M., and Bažant, Z. P., 2000, "Microplane Constitutive Model and Metal Plasticity," Appl. Mech. Rev., 53(10), pp. 265-281.
25. Cusatis, G., Beghini, A., and Bažant, Z. P., 2008, "Spectral Stiffness Microplane Model for Quasi-Brittle Composite Laminates-Part I: Theory," ASME J. Appl. Mech., 75(2), p. 021009.
26. Bažant, Z. P., 2010, "Can Multiscale-Multiphysics Methods Predict Softening Damage and Structural Failure?," Int. J. Multiscale Comp. Eng., 8(1), pp. 61-67.
27. Bažant, Z. P., and Grassl, P., 2007, "Size Effect of Cohesive Delamination Fracture Triggered by Sandwich Skin Wrinkling," ASME J. Appl. Mech., 74, pp. 1134-1141.
28. Ishikawa, T., and Chou, T. W., 1982, "Elastic Behavior of Woven Hybrid Composites," J. Compos. Mater., 16(1), pp. 2-19. (Pubitemid 13521128)
29. Miravete, A., 1999, 3-D Textile Reinforcements in Composite Materials, Woodhead Publishing Ltd., Cambridge, UK.
30. Naik, N. K., and Stembekar, P. S., 1992, "Elastic Behaviour of Woven Fabric Composites: I-Lamina Analysis," J. Compos. Mater., 26, pp. 2196-2225. (Pubitemid 23574601)
31. Huang, Z. M., 2000, "The Mechanical Properties of Composites Reinforced With Woven and Braided Fabrics," Compos. Sci. Technol., 60, pp. 479-498. (Pubitemid 30199720)
32. Naik, R., 1996, "Analysis of 2D Triaxial and 3D Multi-Interlock Braided Textile Composites," 37th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference.
33. Cox, B. N., and Dadkhah, M. S., 1995, "The Macroscopic Elasticity of 3D Woven Composites," J. Compos. Mater., 29, pp. 785-819.
34. Šmilauer, V., Hoover, C. G., Bažant, Z. P., Caner, F. C., Waas, A. M., and Shahwan, K. W., 2009, "Numerical Simulation of Fracture of Braided Composites via Embedded Representative Unit Cell," Northwestern University, Theoretical and Applied Mechanics Report; Engineering Fracture Mechanics 2010, in press.
35. Song, S., Waas, A. M., Shahwan, K. W., Faruque, O., and Xiao, X., 2008, "Compression Response of 2D Braided Textile Composites: Single Cell and Multiple Cell Micromechanics Based Strength Predictions," J. Compos. Mater., 42(23), pp. 2461-2482.
36. Bažant, Z. P., 2002, Scaling of Structural Strength, Hermes Penton Science, London.
37. Bažant, Z. P., and Planas, J., 1998, Fracture and Size Effect in Concrete and Other Quasibrittle Materials, CRC, Boca Raton, FL.
38. Bažant, Z. P., 1984, "Size Effect in Blunt Fracture: Concrete, Rock, Metal," J. Eng. Mech., 110(4), pp. 518-535.
39. Bažant, Z. P., 2004, "Probability Distribution of Energetic-Statistical Size Effect in Quasibrittle Fracture," Probab. Eng. Mech., 19(4), pp. 307-319.
40. Dassault Systèmes, 2007, Dassault Systèmes of America Corp., 6320 Canoga Avenue, Trillium East Tower, Woodlands Hills, CA 91367-2526.
41. Adley, M. D., Frank, A. O., and Danielson, K. T., "The High-Rate Brittle Microplane Concrete Model: Part I: Bounding Curves and Quasi-Static Fit to Material Property Data," Comput. Concr., submitted.
42. Frank, A. O., Adley, M. D., Danielson, K. T., and McDevitt, H. S., Jr., "The High-Rate Brittle Microplane Concrete Model: Part II: Application to Projectile Perforation of Concrete Slabs," Comput. Concr., submitted.
43. Bažant, Z. P., 2004, Scaling of Structural Strength, 2nd ed., Elsevier, London.
44. Bažant, Z. P., Daniel, I. M., and Li, Z., 1996, "Size Effect and Fracture Characteristics of Composite Laminates," ASME J. Eng. Mater. Technol., 118(3), pp. 317-324. (Pubitemid 126663756)
45. Bažant, Z. P., Kim, J.-J. H., Daniel, I. M., Becq-Giraudon, E., and Zi, G., 1999, "Size Effect on Compression Strength of Fiber Composites Failing by Kink Band Propagation," Int. J. Fract., 95, pp. 103-141. (Pubitemid 29520416)
46. Bažant, Z. P., Zhou, Y., Novák, D., and Daniel, I. M., 2004, "Size Effect on Flexural Strength of Fiber-Composite Laminate," ASME J. Eng. Mater. Technol., 126(1), pp. 29-37.
47. Bažant, Z. P., Zhou, Y., Daniel, I. M., Caner, F. C., and Yu, Q., 2006, "Size Effect on Strength of Laminate-Foam Sandwich Plates," ASME J. Eng. Mater. Technol., 128(3), pp. 366-374. (Pubitemid 44196669)
48. Bayldon, J. M., Bažant, Z. P., Daniel, I. M., and Yu, Q., 2006, "Size Effect on Compressive Strength of Sandwich Panels With Fracture of Woven Laminate Facesheet," ASME J. Eng. Mater. Technol., 128, pp. 169-174.
49. Waas, A. M., 2009, private communication.
50. Bažant, Z. P., 1990, "Size Effect Method for Determining Fracture Energy and Process Zone Size of Concrete," Mater. Struct., 23, pp. 461-465.
51. Červenka, J., Bažant, Z. P., and Wierer, M., 2005, "Equivalent Localization Element for Crack Band Approach to Mesh-Sensitivity in Microplane Model," Int. J. Numer. Methods Eng., 62(5), pp. 700-726. (Pubitemid 40191327)
52. Yu, Q., Le, J.-L., Hoover, C. G., and Bažant, Z. P., 2010, "Problems With Hu-Duan Boundary Effect Model and Its Comparison to Size-Shape Effect Law for Quasibrittle Fracture," J. Eng. Mech., 136(1), pp. 40-50.