Microplane constitutive model and metal plasticity

Applied Mechanics Reviews

Volumn 53, Issue 10, 2000, Pages 265-281

  Brocca, Michele ^a   Bažant, Zdeněk P ^a  

^a NORTHWESTERN UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0001309163     PISSN: 00036900     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.3097329     Document Type: Article

References (114)

1. Anand L (1982), Constitutive equations for the rate-dependent deformation of metals at elevated temperatures. JEng Mat Tech 104,12.
2. Anand L (1985), Constitutive equations for hot-working of metals. Int J Plasticity, 1,213.
3. Asaro RJ (1983a), Micromechanics of crystals and polycrystals. Adv Appl Mech 23, 1.
4. Asaro RJ (1983b), Crystal plasticity. J Appl Mech Trans ASME 50, 921-934.
5. Asaro RJ and Needleman A (1985), Texture development and strain hardening in rate dependent polycrystals. Acta Metall 33,923-953.
6. Asaro RJ and Rice JR (1977), Strain localization in ductile single crystals. J Mech Phys Solids, 33, 309-338.
7. Batdorf SB and Budiansky B (1949), A mathematical theory of slip based on the concept of slip. NACA TN1871, April.
8. Bazant ZP (1978), Endochronic inelasticity and incremental plasticity. IntJ Solids Struct, 14,691-714.
9. Bazant ZP (1980), Work inequalities for plastic fracturing materials. Int J Solids Struct, 16, 873-901.
10. Bazant ZP (1984), Microplane model for strain controlled inelastic behavior. Chapter 3 in Mechanics of Engineering Materials, CS Desai and RH Gallagher (eds), J Wiley, London, 45-59.
11. Bazant ZP (1987), Lectures on ‘Material Modeling Principles’ Course 720-D30, Northwestern Univ, Evanston IL.
12. Bazant ZP (1996), Finite strain generalization of small strain constitutive relations for any finite strain tensor and additive volumetric-deviatoric split. Int J Solids Struct 33 (20-22), 2887-2897 (special issue in memory of Juan Simo).
13. Bazant ZP (1998), Easy to compute finite strain tensore with symmetric inverse, approximating Hencky strain tensor. J Eng Mat Tech Trans ASME 120(2), 131-136.
14. th Int Conf on Comput Plasticity, COMPLAS 5, held in Barcelona), DRJ Owen, E Onate and E Hinton (eds), publ by Int Center for Numer Meth in Eng, Barcelona, 3-19.
15. Bazant ZP, Adley MD, Carol I, Jirásek M, Akers SA, Rohani B, Cargile JD, and Caner FC (2000a), Large-strain generalization of microplane model for concrete and applications. J Eng Mech ASCE 126(9) 971 -980.
16. Bazant ZP, Bishop FC, and Chang T-P (1986), Confined compression tests of cement paste and concrete up to 330 ksi. ACI Mat J, 33 (July-August), 553-560.
17. Bazant ZP, Caner FC, Adley MD, and Akers SA (2000b), Incorporation of rate effects of fracturing and creep into microplane model M4 for concrete dynamics. J Eng Mech ASCE 126(9) 962-970.
18. Bazant ZP, Caner FC, Carol I, Adley MD, and Akers SA (2000c), Microplane model M4 for concrete: I. Formulation with work-conjugate de-viatoric stress. J Eng Mech ASCE 126(9) 944-953.
19. Bazant ZP and Cedolin L (1991), Stability of structures: Elastic, inelastic, fracture and damage theories, Oxford Univ Press, New York.
20. Bazant ZP and Gambarova P (1984), Crack shear in concrete: Crack band microplane model. J Struct Eng, ASCE, 110, 2015-2035.
21. Bazant ZP and Kim J-K (1986), Creep of anisotropic clay: microplane model. J Geotech Eng, ASCE, 112, 458-475.
22. Bazant ZP, Kim JJ and Brocca M (1999), Finite strain tube-squash test for concrete at high pressures and shear angles up to 70°. ACI Mat J, 96(5), 580-592.
23. Bazant ZP and Oh BH (1985), Microplane model for progressive fracture of concrete and rock. J Eng Mech, ASCE, 111, 559-582.
24. Bazant ZP and Oh BH (1986), Efficient numerical integration on the surface of a sphere. Zeitschrift fur Angewandte Mathematik und Mechanik (ZAMM., Berlin), 66(1),37-49.
25. Bazant ZP and Prat P (1987), Creep of anisotropic clay: new microplane model. ASCE J Eng Mech, 103(7), 1050-1064.
26. Bazant ZP and Prat PC (1988a), Microplane model for brittle plastic materials: 1. Theory. J Eng Mech, 114(10), 1672-1688.
27. Bazant ZP and Prat PC (1988b), Microplane model for brittle plastic materials: II. V erification. J Eng Mech, ASCE, 114, 1689-1702.
28. Bazant ZP, Xiang Y, and Prat PC (1996), Microplane model for concrete. I. Stress-strain boundaries and finite strain. J Eng Mech, ASCE, 122(3), 245-254, with Errata, Vol 123.
29. Bell JF (1985), Contemporary perspectives in finite strain plasticity. Int J Plasticity, 1, 3-27.
30. Berveiller M and Zaoui A (1978), An extension of the self-consistent scheme to plastically flowing polycrystals. J Mech Phys Solids, 26, 325344.
31. Bishop JFW and Hill R (1951), A theory of the plastic distortion of a polycrystalline aggregate under combined stress. Phil Mag, 42,414-427.
32. Brocca M, Brinson LC and Bazant ZP (1999a), Three dimensional constitutive model for shape memory alloys based on the microplane model. Submitted to J Mech Phys Solids.
33. Brocca M, Bazant ZP and Daniel IM (1999), Microplane model for stiff foams applied to the finite element analysis of failure by core indentation of sandwich beams. Submitted to ASME J Mat Tech.
34. Bronkhorst CA, Kalindindi SR, and Anand L (1992), Polycristalline plasticity and the evolution od crystallographic texture in FCC metals. Phil Trans R Soc London, A341,443-477.
35. Brown GM (1970), A self-consistent polycrystalline model for creep under combined stress states. J Mech Phys Solids, 18, 367-382.
36. Brown SB, Kim KH, and Anand L (1989), An internal variable constitutive model for hot working of metals. Int J Plasticity.
37. Budiansky B and Wu TT (1962), Theoretical prediction of plastic strains in polycrystals. Proc of 4h US Natl Congr Appl Mech, 1175-1185.
38. Butler GC and McDowell DL (1998), Polycrystal constraint and grain subdivision. Int J Plasticity, 14(8), 703-717.
39. Caner FC and Bazant ZP (2000), Microplane model M4 for concrete: II. Algorithm, calibration and application. J Eng Mech, ASCE 126(9) 954-961.
40. Canova GR, Kocks UF, and Jonas JJ (1984), Theory of torsion texture development. Acta Metall 32,211.
41. Carol I and Bazant ZP (1993), Viscoelasticity with aging caused by solidification of nonaging constituent. J Eng Mech, ASCE, 119(11), 2252-2269.
42. Carol I. and Bazant ZP (1997), Damage and Plasticity in Microplane Theory. Int J Solids Struct 34(29), 3807-3835.
43. Carol I, Prat PC, and Bazant ZP (1992), New explicit microplane model for concrete: Theoretical aspects and numerical implementation. Int J Solids Struct, 29(9), 1173-1191.
44. Christoffersen J and Hutchinson JW (1979), A class of phenomenological comer theories of plasticity. J Mech Phys Solids, 27,465-487.
45. Dienes JK (1979), On the analysis of rotation and stress rate in deforming bodies. Acta Mech, 32, 217-232.
46. Doyle TC and Ericksen JL (1956), Non-linear elasticity. Adv Appl Mech 4, 53-115.
47. Drucker DC (1951), A More Fundamental Approach to Plastic Stress-Strain Relations. Proc of 1st US Natl Congress of Appl Mech, ASME, 487-491.
48. Eterovic AL and Bathe KJ (1990), A hyperelastic-based large-strain elasto-plastic constitutive formulation. Int JNum Meth Eng, 30,1099-1114.
49. Flory TJ (1961), Thermodynamic relations for high elastic materials. Trans, Faraday Soc 57, 829-838.
50. Fressengeas C and Molinari A (1985), Sur les critères de localisation de la déformation plastique de traction simple. J Phys Paris Colloq 46(8), 121-125.
51. Gabriel G and Bathe KJ (1995), Some computational issues in large strain elasto-plastic analysis. Compttt Struct, 56 (2/3), 249-267.
52. Gerard G and Becker H (1957), Handbook of structural stability: Part I -Buckling of flat plates. NACA Tech Note 3781.
53. Harren S, Lowe TC, Asaro RJ, and Needleman A (1989), Analysis of large-strain shear in rate-dependent face-centered cubic polycrystals: correlations of micro- and macromechanics. Phil Trans R Soc Lond, A328, 443-500.
54. Hibbitt HD, Karlsson BI, and Sorensen, P., (1994), ABAQUS Theory Manual, Version 5.5 Hibbitt, Karlson and Sorensen Inc, Pawtucket, RI, Sec 4.6.1.
55. Hibbitt HD, Marcai PV, and Rice JR (1970), A finite element formulation for problems of large strain and large displacement. Int J Solids Struct, 6,1069-1086.
56. Hill R (1950), The Mathematical Theory of Plasticity. Oxford Univ Press, Oxford.
57. Hill R (1958), A general theory of uniqueness and stability in elastic-plastic solids. J Mech Phys Solids, 6, 236-249.
58. Hill R (1959), Some basic principles in the mechanics of solids without a natural time. J Mech Phys Solids, 7, 209-225.
59. Hill R (1965), Continuum micromechanics of elastoplastic polycrystals. J Mech Phys Solids, 13, 89-102.
60. Hill R (1966), Generalized constitutive relations for incremental deformation of metal crystals by multislip. J Mech Phys Solids, 14, 95-102.
61. Hill R (1972), On constitutive macro-variables for heterogeneous solids at finite strain. Proc R Soc Lond, A326, 131-147.
62. Hill R and Rice JR (1972), Constitutive analysis of elastic-plastic ciystal at arbitrary strain. J Mech Phys Solids, 20,401-413.
63. Hoger A (1987), The stress conjugate to logarithmic strain. Int J Solids Struct, 23(12), 1645-1656.
64. h Int Conf On Texture of Materials (lOCOTOM 5), G Gottstein and K Lucke (eds), 1,265-275.
65. h Riso Int Symp On Materials Science: Microstruc-tural and Crystallographic Aspects of Recrystallozation, N Hansen, Y-L Liu, D Juul Jensen, and B Ralph (eds), 63-85. Riso Natl Lab, Roskilde, Denmark
66. Hughes DA and Hansen N (1993), High Angle Boundaries and Orientation Distribution at large strains. Scripta Metall Mater, 33(2),315-321.
67. Hughes TJR (1984), Numerical implementation of constitutive models: rate-independent deviatoric plasticity. Theoretical Foundation for Large-Scale Computations for Nonlinear Material Behavior, S Nemat-Nasser, RJ Asaro, and GA Hegemier (eds), Matrinus Nijhoff Publ, Dordrecht, Netherlands.
68. Hutchinson JW (1965), Bounds and self-consistent estimates for creep of polycrystalline materials. Proc R Soc London, A348, 101-127.
69. Hutchinson JW (1970), Elastic plastic behavior of polycrystalline metals and composites. Proc R Soc London, A319,247-272.
70. Hutchinson JW (1974), Plastic buckling. Adv Appl Mech, 14,67-144.
71. Hutchinson JW and Tvergaard V (1980), Surface instabilities in statically constrained plastic solids. Int J Mech Sci, 22,339-354.
72. Johnson GR, et al. (1995), User instructions for the 1995 version of the EPIC Reaserch Code. Alliant Techsystems, Hopkins, New Mexico.
73. Key, S. W., (1984), In Mechanics of elastic and inelastic solids 6: theoretical foundations for large-scale computations for nonlinear material behavior, S Nemat-Nasser, RJ Asaro, and GA Hegemier (eds). Dordrecht: Martinus Nijhoff Publ.
74. Koiter WT (1953), Stress-strain relations, uniqueness and variational theorems for elastic-plastic materials with a singular yield surface. Q Appl Math, 11, 350-354.
75. Krieg RD and Key SW (1976), Implementation of a time independent plasticity theory into structural computer programs. Constitutive Equations in Viscoplasticity: Computational and Engineering Aspects, JA Stricklin and KJ Saczlski (eds), AMD 20, ASME, New York,125-137.
76. Kroner E (1961), Zur Plastischen Verformung des Vielkristalls. Acta Metall, 9, 155-161.
77. Lee EH, Mallett RL, and Wertheimer TB (1983), Stress analysis for anisotropic hardening in finite-deformation plasticity. J Appl Mech, Trans ASME, 50, 554-560.
78. Lin TH and Ito M (1965), Theoretical plastic distortion of a polycrystallinf aggregate under combined and reversed stresses. J Mech Phys Solids 13, 103-115.
79. Lubliner J (1986), Normality rules in large-deformation plasticity. Mech Mat, 5, 29-34.
80. Malvern, L. E., (1969), Introduction to Mechanics of a Continuous Medium Prentice Hall, Englewood Cliffs NJ.
81. Mandei J (1965), Generalisation de la théorie de plasticité de WT Koiter. In, J Solids Struct, 1, 273-295.
82. McMeeking RM and Rice JR (1975), Finite element formulation for problems of large elastic plastic deformation. Int J Solids Struct, 11, 601-616
83. Needleman A (1972), A numerical study of necking in circular cylindrical bars. J Mech Phys Solids, 20, 111-127.
84. Needleman A (1984), On finite element formulations for large elastic-plastic deformations. Comput Struct 20(1-3), 247-257.
85. Ogden RW (1984), Non Linear Elastic Deformations. Ellis Horwood, Ltd, Chichester UK and John Wiley and Sons, Chichester UK.
86. Osias JR and Swedlow JL (1974), Finite elasto-plastic deformation- I. theory and numerical examples. Int J Solids Struct, 10, 321-339.
87. Pan J and Rice JR (1983), Rate sensitivity of plastic flow and implications for yield surface vertices. Int J Solids Struct, 19, 973-987.
88. Pande G and Sharma K (1983), Multilaminate model of clays-A numerical evaluation of the influence of rotation of principal axes. J Eng Mech, ASCE, 109(7), 397-418.
89. Pierce D, Asaro RJ, and Needleman A (1983), Material rate dependence and localized deformation in ctystalline solids. Acta Metall, 31, 1951.
90. Ponthot J-P (1995), Radial return extensions for visco-plasticity and lubricated friction. SmiRT-13 Int Conf on Structural Mechanics in Reactor Technology, Porto Alegre, Brazil.
91. Prat P and Bazant ZP (1989), Microplane model for triaxial deformation of soils. In Numerical Models in Geomechanics (NUMOG III), S Pie-truszczac and G Pande (eds), 139-146. Elsevier, Niagara Falls, Canada.
92. Prat P and Bazant ZP (1991a), Microplane model for triaxial deformation of saturated cohesive soils. ASCE J Geotech Eng 117(6), 891-912.
93. Prat P and Bazant ZP (1991b), A time dependent microplane model for creep of cohesive soils. In Mechanics Computing in the 90s and beyond, Proc of ASCE-EMD Specialty Conf, H Adeli and RL Sierakowski (eds), 1224-1228, ASCE, Columbus OH.
94. h Edition, 23, 737-747 and 773.
95. Rice JR (1971), Inelastic constitutive relations for solids: An internal variable theory and its application to metal plasticity. J Mech Phys Solids, 19,433-455.
96. nd Int Symp on Plasticity and its Current Applications, AS Kahn and M Tokuda (eds), Mie, 69-72, Japan.
97. Rudnicky JW and Rice JR (1975), Conditions for the localization of deformation in pressure-sensitive dilatant materials. J Mech Phys Solids, 23, 371-394.
98. Sewell MJ (1974), Plastic flow rule at a yield vertex. J Mech Phys Solids, 22,469-490.
99. Sidoroff F (1974), Un modèle viscoélastique non linéaire avec configuration intermédiaire. Journal de Mécanique 13, 679-713.
100. Simo JC (1988), A framework for finite strain elastoplasticity based on maximum plastic dissipation and the multiplicative decomposition. Comput Meth Appl Mech Eng, 66, 199-219 and 68, 1-31.
101. Simo JC and Ortiz M (1985), A unified approach to finite deformation elasto-plasticity based on the use of hyperelastic constitutive equations. Comput Meth Appl Mech Eng 49, 177-208.
102. Stõren S and Rice JR. (1975), Localized necking in this sheets. J Mech Phys Solids, 23, 421-441.
103. Stowell EZ (1948a), Critical shear stress of an infinitely long plate in the plastic region. NACA Tech Note.
104. Stowell EZ (1948b), A unified theory of plastic buckling of columns and plates. NACA, Rep. 898.
105. Stroud AH (1971), Approximate calculation of multiple integrals. Prentice-Hall, Englewood Cliffs NJ.
106. Taylor GI (1934), The mechanics of plastic deformation of crystals, part i-theoretical. Proc R Soc London, 145, 362-387.
107. Taylor GI (1938), Plastic Strain in Metals. J Inst Met, 63, 307-324.
108. Taylor GI and Elam CF (1923), The distortion of an aluminium crystal during a tensile test. Proc R Soc London, A102, 643-667.
109. Taylor GI and Elam CF (1925), The plastic extension and fracture of aluminium crystals. Proc R Soc London, 108,28-51.
110. Taylor GI and Elam CF (1926), The distortion of iron crystals. Proc R Soc London, 112,337-361.
111. Valanis K (1971), A theory of viscoplasticity without a yield surface. Ar-chiwum Mechaniki Stossowanej (Archives of Mechanics, Warsaw) 23, 517-551.
112. Weber G and Anand L (1990), Finite deformation constitutive equations and a time integration procedure for isotropic, hyperelastic-viscoplastic solids. Comp Meth appl Mech Engrg, 79, 173.
113. Wilkins ML (1964), Calculation of Elastic-plastic Flow. Methods of Computational Physics, 3, B Alder et al (eds), Academic Press, New York.
114. Zienkiewicz O and Pande G (1977), Time-dependent multi-laminate model of rocks- A numerical study of deformation and failure of rock masses. IntJ Anal Num Meth Geomech, 1, 219-247.