Recent trend and future perspectives in electrical insulation techniques in relation to sulfur hexafluoride (SF6) substitutes for high voltage electric power equipment

IEEE Electrical Insulation Magazine

Volumn 27, Issue 2, 2011, Pages 34-42

  Okubo, Hitoshi ^a   Beroual, Abderrahmane ^b  

^a NAGOYA UNIVERSITY   (Japan)

^b CNRS   (France)

Author keywords

alternate dielectrics; biodegradable liquid; emission control; functionally graded material; gas circuit breaker; gas mixture; gas insulated switchgear; gas insulated transmission line; nanocomposite; sulfur hexafluoride; sulfur hexafluoride gas substitute; vacuum

Indexed keywords

ALTERNATE DIELECTRICS; BIODEGRADABLE LIQUID; FUNCTIONALLY GRADED; GAS CIRCUIT BREAKER; GAS-INSULATED SWITCHGEAR; GAS-INSULATED TRANSMISSION LINE;

BEAMS AND GIRDERS; CAPACITANCE; CIRCUIT BREAKING ARCS; ELECTRIC EQUIPMENT; ELECTRIC INSULATION; ELECTRIC LINES; ELECTRICITY; EMISSION CONTROL; FUNCTIONALLY GRADED MATERIALS; GAS MIXTURES; LIQUIDS; NANOCOMPOSITES; SULFUR; SULFUR HEXAFLUORIDE CIRCUIT BREAKERS; TRANSMISSION LINE THEORY; VACUUM;

SULFUR HEXAFLUORIDE;

EID: 79953183073     PISSN: 08837554     EISSN: None     Source Type: Journal    
DOI: 10.1109/MEI.2011.5739421     Document Type: Article

References (35)

1. United Nations, Kyoto Protocol to the United Nations Framework Convention on Climate Change, 1997.
2. 6 gas seal technology and experience for GIS in Japan," presented at CIGRE B3, Berlin, Germany, 202, 2007.
3. H. Okubo, "Future technical perspectives for electric power equipment in substations," presented at CIGRE A3/B3 Colloquium, Tokyo, Japan, 2005.
4. H. Koch, "Experience with 2nd generation gas-insulated transmission lines (GIL)," presented at Jicable, Paris, France, A.3.2, 2003.
5. 8 and N2 gas mixture in rod-plane gaps," presented at XVI International Conference on Gas Discharge and their Applications, Xi'an, China, 2006.
6. 6 as an insulation medium at low E/N (<400Td)" presented at XVI International Conference on Gas Discharge and their Applications, Xi'an, China 2006.
7. L. G. Christophorou, "Insulating gases," Nucl. Instrum. Meth. Phys. Res. A, vol. 268, pp. 424-433, 1988.
8. 6," National Institute of Standards and Technology technical note 1425, Nov. 1997.
9. 2," in Gaseous Dielectrics IX, L. G. Christophorou and J. K. Olthoff, Ed. New York, NY: Plenum-Kluwer, 2001, pp. XX-XX.
10. 2 gas under actual equipment conditions," IEEE Trans. Dielecr. Electr. Insul., vol. 14, no. 1, pp. 83-90, 2007. (Pubitemid 46375884)
11. 2 gas circuit breaker model," IEEJ Trans. Power Energy, vol. 124, no. 3, pp. 476-484, 2004.
12. T. Yoshida, H. Koga, T. Harada, S. Miki, M. Arioka, S. Sato, S. Yoshida, N. Inoue, A. Maruyama, and T. Takeuchi, "Insulation technology in dry air and vacuum for a 72 kV low pressure dry air insulated switchgear," IEEJ Trans. Power Energy, vol. 128, no. 12, pp. 1439-1444, 2008.
13. 6-free 72.5 kV GIS," IEEE Trans. Power Deliv., vol. 22, no. 3, pp. 1869-1876, 2007.
14. H. Hama and S. Okabe, "Application of new solid insulating materials and gases to future advanced gas insulated systems," presented at CIGRE 2010, Paper D1-103, 2010.
15. H. Okubo, "Development of electrical insulation techniques in vacuum for higher voltage vacuum interrupters," in International Symposium on Discharges and Electrical Insulation in Vacuum, 2006, pp. 7-12.
16. K. Kato, S. Kaneko, S. Okabe, and H. Okubo, "Optimization technique for electrical insulation design of vacuum interrupters, IEEE Trans. Dielectr. Electr. Insul., vol. 15, no. 5, pp. 1456-1463, 2008.
17. H. Saito, H. Ichikawa, A. Nishijima, Y. Matsui, M. Sakaki, A. Honma, and H. Okubo, "Research and development on 145 kV/40 kA one break vacuum circuit breaker," in IEEE/PES Transmission and Distribution Conference 2002: Asia Pacific, 2002, pp. 1465-1468.
18. 6 gasless type switchgear for distribution and transmission voltage class in Korea," CIGRE paper, A3-308, 2010.
19. X. Yu, Z. Liu, Q. Feng, Y. Wei, and J. Wang, "Research on a gravity heat pipe for high voltage vacuum interrupter," in 23rd International Symposium on Discharges and Electrical Insulation in Vacuum, 2008, pp. 129-132.
20. K. Sato, R. Watanabe, I. Hosokawa, M. Kobayashi, and Y. Sugawara, "Development of cubicle type vacuum insulated switchgear for overseas markets," Hitachi Hyoron, vol. 91, no. 3, pp. 44-47, 2009.
21. T. Tanaka, et al., "Polymer nanocomposites-Fundamentals and possible applications to power sectors," CIGRE, SC D1 WG 24 Technical Brochure, To be published, 2010.
22. M. Kurimoto, H. Okubo, K. Kato, M. Hanai, Y. Hoshina, M. Takei, and N. Hayakawa, "Dielectric properties of epoxy/alumina nanocomposite influenced by control of micrometric agglomerates," IEEE Trans. Dielectr. Electr. Insul., vol. 17, no. 2, pp. 662-670, 2010.
23. H. Okubo, N. Hayakawa, and G. C. Montanari, "Technical development on partial discharge measurement and electrical insulation techniques for low voltage motors driven by voltage inverters," IEEE Trans. Dielectr. Electr. Insul., vol. 14, no. 6, pp. 1516-1530, 2007. (Pubitemid 350274163)
24. S. Okabe, T. Yamagiwa, and H. Okubo, "Detection of harmful metallic particles inside gas insulated switchgear using UHF sensor," IEEE Trans. Dielectr. Electr. Insul., vol. 15, no. 3, pp. 701-709, 2008.
25. H. Okubo, K. Kato, N. Hayakawa, M. Hanai, and M. Takei, "Functionally graded materials (FGM) and their applications to higher electric power equipment," presented at CIGRE SC D1 Colloquium, D1-101, Budapest, Hungary, 2009.
26. C. Perrier and A. Beroual, "Experimental investigations on insulating liquids for power transformers: Mineral, ester and silicone oil," IEEE Electr. Insul. Mag., vol. 25, no. 6, pp. 6-13, 2009.
27. T. V. Oommen, "Vegetable oils for liquid-filled transformers," IEEE Electr. Insul. Mag., vol. 18, no. 1, pp. 6-11, 2002. (Pubitemid 34255608)
28. H. Okubo and K. Kato, "Charge behavior and field measurement techniques in different kinds of insulating oil for power transformers," in IEEE International Conference on Dielectric Liquids, 2008, pp. 1-6.
29. H. Koide, et al., "Commercialization of palm fatty acid ester oil immersed transformer," Japan AE Power Rev., vol. 3, p. 10, Aug. 2010.
30. E. Gockenbach, et al., "Insulating liquids for future transformers," presented at CIGRE SC D1 Colloquium, D1-102, Budapest, Hungary, 2009.
31. T. Blackburn, K. Budin, B. Finlay, S. Islam, and L. McPherson, "Australian experience with the development, ageing and maintenance of vegetable-based insulating oils," presented at CIGRE Paris, D1-301, Paris, France, 2006.
32. A. Darwin, C. Perrier, and P. Foliot, "The use of natural ester fluids in transformer," in MATPOST2007, Paper 0036, 2007.
33. J. C. Mendes, A. S. G. Reis, E. C. Nogawa, C. Ferra, A. J. A. L. Martins, and A. C. Passos, "Advanced application of a natural ester vegetable oil in a HV power transformers," presented at CIGRE, A2-101, Paris, France, 2008.
34. E. Takahashi, K. Tanaka, K. Toda, M. Ikeda, T. Teranishi, M. Inaba, and T. Yanari, "Development of large-capacity gas-insulated transformer," IEEE Trans. Power Deliv., vol. 11, no. 2, pp. 895-902, 2002.
35. F. Endo, R. Shiomi, Y. Suzuki, H. Kojima, N. Hayakawa, and H. Okubo, "Optimized asset management of high voltage substations and power network operation based on equipment performance," presented at CIGRE 6th Southern Africa Regional Conference, CIGRE A2/A3/B3, Paper C201, 2009.