Hydroxyapatite coatings prepared by a high power laminar plasma jet

Journal of Materials Processing Technology

Volumn 211, Issue 6, 2011, Pages 996-1004

  Vilotijević, Miroljub ^a   Marković, Petar ^a   Zec, Slavica ^b   Marinković, Slobodan ^b   Jokanović, Vukoman ^b  

^a Plasma Jet Co   (Serbia)

^b UNIVERSITY OF BELGRADE   (Serbia)

Author keywords

Bonding strength; Hydroxyapatite coating; Phase composition; Plasma spraying

Indexed keywords

BONDING STRENGTH; COATING SURFACE; COATING THICKNESS; HIGH CRYSTALLINITY; HIGH-ADHESION; HIGH-POWER; HYDROXYAPATITE COATING; LOW POROSITY; MACRO-CRACKS; OPTIMUM DEPOSITION; PLASMA POWER;

APATITE; DIFFUSION BONDING; HYDROXYAPATITE; PHASE COMPOSITION; PLASMA JETS; PLASMA SPRAYING; PROTECTIVE COATINGS; THICKNESS MEASUREMENT;

PLASMAS;

EID: 79952988258     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmatprotec.2010.12.018     Document Type: Article

References (31)

1. C. Auclair-Daigle, M.N. Bureau, J.G. Legoux, and L.H. Yahia Bioactive hydroxyapatite coatings on polymer composites for orthopedic implants J. Biomed. Mater. Res. 75A 2005 398 408 (Pubitemid 40791387)
2. G. Barbezat, and K. Landes Plasma torch-system triplex: increased production and a more stable process Sulzer Tech. Rev. 4 1999 32 35
3. J.F. Bisson, B. Gauthier, and C. Moreau Effect of plasma fluctuations on in-flight particle parameters J. Therm. Spray Technol. 12 2003 38 43
4. J.F. Bisson, B. Gauthier, and C. Moreau Effect of direct-current plasma fluctuations on in-flight particle parameters: Part II J. Therm. Spray Technol. 12 2003 258 268
5. J. Chen, J.G.C. Wolke, and K. deGroot Microstructure and crystallinity in hydroxyapatite coatings Biomaterials 15 1994 396 399 (Pubitemid 24127324)
6. J. Cihlar, A. Buchal, and M. Trunec Kinetics of thermal decomposition of hydroxyapatite bioceramics J. Mater. Sci. 34 1999 6121 6131 (Pubitemid 30524753)
7. S. Dyshlovenko, B. Pateyron, L. Pawlowski, and D. Murano Numerical simulation of hydroxyapatite powder behaviour in plasma jet Surf. Coat. Technol. 179 2004 110 117 (Pubitemid 38237609)
8. P. Fauchais Understanding plasma spraying J. Phys. D: Appl. Phys. 37 2004 R86 R108
9. S. Ghorui, and A.K. Das Origin of fluctuations in atmospheric pressure arc plasma devices Phys. Rev. E 69 2004 7 026408
10. K.A. Gross, and C.C. Berndt Thermal processing of hydroxyapatite for coating production J. Biomed. Mater. Res. 39 1998 580 587 (Pubitemid 28079721)
11. K.A. Gross, C.C. Berndt, and H. Harman Amorphous phase formation in plasma-sprayed hydroxyapatite coatings J. Biomed. Mater. Res. 39 1998 407 414 (Pubitemid 28063456)
12. R.B. Heimann Thermal spraying of biomaterials Surf. Coat. Technol. 201 2006 2012 2019 (Pubitemid 44348557)
13. R.B. Heimann, N. Schurmann, and R.T. Muller In vitro and in vivo performance of Ti6Al4V implants with plasma-sprayed osteoconductive hydroxylapatite-bioinert titania bond coat "duplex" systems: an experimental study in sheep J. Mater. Sci.: Mater. Med. 15 2004 1045 1052 (Pubitemid 39328183)
14. K.A. Khor, Y.W. Gu, C.H. Quek, and P. Cheang Plasma spraying of functionally graded hydroxyapatite/Ti-6Al-4V coatings Surf. Coat. Technol. 168 2003 195 201 (Pubitemid 36447463)
15. M. Kou, T. Toda, and O. Fukumasa Production of fine hydroxyapatite films using the well-controlled thermal plasma Surf. Coat. Technol. 202 2008 5753 5756
16. R. McPherson, N. Gane, and T.J. Bastow Structural characterization of plasma-sprayed hydroxyapatite coatings J. Mater. Sci.: Mater. Med. 6 1995 327 334
17. Z. Mohammadi, A.A. Ziaei-Moayyed, and A.S. Mesgar Grit blasting of Ti-6Al-4V alloy: optimisation and its effect on adhesion strength of plasma-sprayed hydroxyapatite coatings J. Mater. Process. Technol. 194 2007 15 23
18. Z. Mohammadi, A.A. Ziaei-Moayyed, and A.S. Mesgar In vitro dissolution of plasma-sprayed hydroxyapatite coatings with different characteristics: experimental study and modeling Biomed. Mater. 3 2008 7 015006
19. M.F. Morks, and A. Kobayashi Influence of gas flow rate on the microstructure and mechanical properties of hydroxyapatite coatings fabricated by gas tunnel type plasma spraying Surf. Coat. Technol. 201 2006 2560 2566 (Pubitemid 44742936)
20. I. Oh, N. Nomura, A. Chiba, Y. Murayama, N. Masahashi, B. Lee, and S. Hanada Microstructures and bond strengths of plasma-sprayed hydroxyapatite coatings on porous titanium substrates J. Mater. Sci.: Mater. Med. 16 2005 635 640 (Pubitemid 40908901)
21. E. Pfender, and Y.C. Lee Particle dynamics and particle heat and mass transfer in thermal plasmas. Part 1. The momentum of a single particle without thermal effects Plasma Chem. Plasma Process. 5 1985 211 237 (Pubitemid 15603626)
22. E. Pfender, J. Fincke, and R. Spores Entrainment of cold gas into thermal plasma jets Plasma Chem. Plasma Process. 11 1991 529 543
23. M.P. Planche, J.F. Coudert, and P. Fauchais Velocity measurements for arc jets produced by a DC plasma spray torch Plasma Chem. Plasma Process. 18 1998 263 283 (Pubitemid 128363141)
24. L. Sun, C.C. Berndt, and C.P. Grey Phase, structural and microstructural investigations of plasma sprayed hydroxyapatite coatings Mater. Sci. Eng. A 360 2003 70 84 (Pubitemid 37224476)
25. Y.C. Tsui, C. Doyle, and T.W. Clyne Plasma sprayed hydroxyapatite coatings on titanium substrates, Part 1: mechanical properties and residual stress levels Biomaterials 19 1998 2015 2029 (Pubitemid 28537643)
26. A. Vardelle, P. Fauchais, M. Vardelle, and G. Mariaux Direct current plasma spraying: diagnostics and process simulation Adv. Eng. Mater. 8 2006 599 610 (Pubitemid 44179088)
27. M. Vilotijevic, B. Dacic, and D. Bozic Velocity and texture of a plasma jet created in a plasma torch with fixed minimal arc length Plasma Sources Sci. Technol. 18 2009 8 015016
28. T. Wang, A.D. Reisel, and E. Muller Thermogravimetric and thermokinetic investigation of the dehydroxylation of a hydroxyapatite powder J. Eur. Ceram. Soc. 24 2004 693 698 (Pubitemid 37388271)
29. C.Y. Yang, R.M. Lin, B.C. Wang, T.M. Lee, E. Chang, Y.S. Hang, and P.Q. Chen In vitro and in vivo mechanical evolutions of plasma-sprayed hydroxyapatite coatings on titanium implants: the effect of coating characteristics J. Biomed. Mater. Res. 37 1997 335 345 (Pubitemid 27481448)
30. C.Y. Yang, and E. Chang Influence of residual stress on bonding strength and fracture of plasma-sprayed hydroxyapatite coatings on Ti-6Al-4V substrate Biomaterials 22 2001 1827 1836 (Pubitemid 32564972)
31. X. Zheng, M. Huang, and C. Ding Bond strength of plasma-sprayed hydroxyapatite/Ti composite coatings Biomaterials 21 2000 841 849 (Pubitemid 30216439)