Application of the crystalline volume fraction for characterizing the ultrastructural organization of wood

Cellulose

Volumn 18, Issue 2, 2011, Pages 223-235

  Bonarski, Jan T ^a   Olek, Wiesław ^b  

^a INSTITUTE OF METALLURGY AND MATERIALS SCIENCE   (Poland)

^b POZNA UNIVERSITY OF LIFE SCIENCES   (Poland)

Author keywords

Crystallinity; Crystallographic texture; Scots pine wood; X ray diffraction

Indexed keywords

ALTERNATIVE PROCEDURES; CRYSTALLINE PHASE; CRYSTALLINE VOLUME FRACTION; CRYSTALLINITIES; CRYSTALLINITY DETERMINATION; CRYSTALLOGRAPHIC TEXTURE; EXPERIMENTAL PROCEDURE; NEW PARAMETERS; ORIENTATION DISTRIBUTION FUNCTION; PINUS SYLVESTRIS; POLE FIGURE; SCOTS PINE WOOD; STANDARD METHOD; X-RAY SIGNALS;

AMORPHOUS MATERIALS; CRYSTALLINE MATERIALS; DIFFRACTION; DISTRIBUTION FUNCTIONS; FORESTRY; POLES; PROFITABILITY; TEXTURES; TITRATION; VOLUME FRACTION; X RAY DIFFRACTION; X RAYS;

WOOD;

AMORPHOUS MATERIALS; CRYSTALLINITY; CRYSTALLITES; DIFFRACTION; FORESTRY; PINUS SYLVESTRIS; TEXTURE; ULTRASTRUCTURE; VOLUMETRY; WOOD; X RAY DIFFRACTION;

EID: 79952533313     PISSN: 09690239     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10570-010-9486-7     Document Type: Article

References (56)

1. Abe K, Yano H (2009) Comparison of the characteristics of cellulose microfibril aggregates of wood, rice straw and potato tuber. Cellulose 16: 1017-1023.
2. Abe K, Yano H (2010) Comparison of the characteristics of cellulose microfibril aggregates isolated from fiber and parenchyma cells of Moso bamboo (Phyllostachys pubescens). Cellulose 17: 271-277.
3. Åkerholm M, Salmén L (2003) The oriented structure of lignin and its viscoelastic properties studied by static and dynamic FT-IR spectroscopy. Holzforschung 57: 459-465.
4. Andersson S, Serimaa R, Paakkari T, Saranpää P, Pesonen E (2003) Crystallinity of wood and the size of cellulose crystallities in Norway spruce (Picea abies). J Wood Sci 49: 531-537.
5. Averbach BL, Cohen M (1948) X-ray determination of retained austenite by integrated intensities. Trans Metall Soc AIME 176: 401-415.
6. Baeza J, Freer J (2001) Chemical characterization of wood and its components. In: Hon DN-S, Shiraishi N (eds) Wood and cellulosic chemistry, 2nd edn. Marcel Dekker, New York.
7. Bak JS, Ko JK, Choi I-G, Y-Ch Park, Seo J-H, Kim KH (2009) Fungal pretreatment of lignocellulose by Phanerochaete chrysosporium to produce ethanol from rice straw. Biotechnol Bioeng 104: 471-482.
8. Barnett JR, Bonham VA (2004) Cellulose microfibril angle in the cell wall of wood fibres. Biol Rev 79: 461-472.
9. Bonarski J, Olek W (2006) Texture function application for wood ultrastructure description. Part 1. Theory. Wood Sci Technol 40: 159-171.
10. Bonarski JT, Olek W (2007) Preferred crystallographic orientation in mature and juvenile wood. Z Kristallogr 222: 199-203.
11. Bonarski JT, Wróbel M, Pawlik K (2000) Quantitative phase analysis of duplex stainless steel using incomplete pole figures. Mater Sci Technol 16(6): 657-662.
12. Bunge H-J (1982) Texture analysis in materials science. Butterworths, London.
13. Cave ID (1969) The longitudinal Young's modulus of Pinus Radiata. Wood Sci Technol 3: 40-48.
14. Cave ID, Walker JCF (1994) Stiffness of wood in fast-grown softwoods: the influence of microfibril angle. For Prod J 44: 43-48.
15. Chen Y, Wang Y, Wan J, Ma Y (2010) Crystal and pore structure of wheat straw cellulose fiber during recycling. Cellulose 17: 329-338.
16. Cullity BD (1978) Elements of X-ray diffraction, 2nd edn. Addison-Wesley, London.
17. Donaldson L (2007) Cellulose microfibril aggregates and their size variation with cell wall type. Wood Sci Technol 41: 443-460.
18. Donaldson L (2008) Microfibril angle: measurement, variation and relationship-a review. IAWA J 29: 345-386.
19. Esteban LG, de Palacios P, García Fernández F, García-Amorena I (2010a) Effects of burial of Quercus spp. wood aged 5910 ± 250 BP on sorption and thermodynamic properties. Int Biodeterior Biodegradation 64: 371-377.
20. Esteban LG, de Palacios P, García Fernández F, Martín JA, Génova M, Fernández-Golfín JI (2010b) Sorption and thermodynamic properties of buried juvenile Pinus sylvestris L. wood aged 1, 170 ± 40 BP. Wood Sci Technol 43: 679-690.
21. Eyholzer Ch, Bordeanu N, Lopez-Suevos F, Rentsch D, Zimmermann T, Oksman K (2010) Preparation and characterization of water-redispersible nanofibrillated cellulose in powder form. Cellulose 17: 19-30.
22. Gümüşkaya E, Mustafa U (2006) Dependence of chemical and crystalline structure of alkali sulfite pulp on cooking temperature and time. Carbohydr Polym 65: 461-468.
23. Hang W, Liang M, Lu C (2007) Morphological and structural development of hardwood cellulose during mechanochemical pretreatment in solid state through pan-milling. Cellulose 14: 447-456.
24. Jasiukaitytė E, Kunaver M, Strlič M (2009) Cellulose liquefaction in acidified ethylene glycol. Cellulose 16: 393-405.
25. Jiang Z-H, Yang Z, So C-L, Hse C-Y (2007) Rapid prediction of wood crystallinity in Pinus elliotii plantation wood by near-infrared spectroscopy. J Wood Sci 53: 449-453.
26. Jonoobi M, Harun J, Shakeri A, Misra M, Oksman K (2009) Chemical composition, crystallinity, and thermal degradation of bleach and unbleached kenaf bast (Hibiscus cannabinus) pulp and nanofibers. BioResource 4: 626-639.
27. Jonoobi M, Harun J, Mathew AP, Hussein MZB, Oksman K (2010) Preparation of cellulose nanofibers with hydrophobic surface characteristics. Cellulose 17: 299-307.
28. Kaida R, Kaku T, Baba K, Oyadomari M, Watanabe T, Hartati S, Sudarmonowati E, Hayashi T (2009) Enzymatic saccharification and ethanol production of Acacia mangium and Paraserianthes falcataria wood, and Elaeis guineensis trunk. J Wood Sci 55: 381-386.
29. Kaku T, Serada S, Baba K, Tanaka F, Hayashi T (2009) Proteomic analysis of the G-layer in poplar tension wood. J Wood Sci 55: 250-257.
30. Kasai N, Kakudo M (2005) X-ray diffraction by macromolecules. Kodansha and Springer, Berlin.
31. Kim N-H (2005) An investigation of mercerization in decayed oak wood by a white rot fungus (Lentinula edodes). J Wood Sci 51: 290-294.
32. Klemm D, Philipp B, Heinze T, Heinze U, Wagenknecht W (1998) Comprehensive cellulose chemistry. Volume 1: fundamentals and analytical methods. Wiley, Weinheim.
33. Kukkola E, Saranpää P, Fagerstedt K (2008) Juvenile and compression wood cell wall layers differ in lignin structure in Norway spruce and Scots pine. IAWA J 29: 47-54.
34. Liitiä T, Maunu SL, Hortling B, Tamminen T, Pekkala O, Varhimo A (2003) Cellulose crystallinity and ordering of hemicelluloses in pine and birch pulps as revealed by solid-state NMR spectroscopic methods. Cellulose 10: 307-316.
35. Meylen BA (1968) Cause of high longitudinal shrinkage in wood. For Prod J 18: 75-78.
36. Mondal MdIH, Uraki Y, Ubukata M, Itoyama K (2008) Graft polymerization of vinyl monomers onto cotton fibres pretreated with amines. Mechanical property and moisture sorption. Cellulose 15: 581-592.
37. Olek W, Bonarski J (2006) Texture function application for wood ultrastructure description. Part 2. Application. Wood Sci Technol 40: 336-349.
38. Pawlik K (1986) Determination of the orientation distribution from pole figures in arbitrarily defined cells. Physica Stat Solidi (B) 134: 477-483.
39. Pawlik K, Pospiech J (1987) A method for the ODF approximation in arbitrarily defined cells from pole figures. In: Bunge HJ (ed) Theoretical methods of texture analysis. DGM Informationsgesellschaft Verlag, Oberursel.
40. Pereira H, Graça J, Rodrigues JC (2003) Wood chemistry in relation to quality. In: Barnett JR, Jeronimidis G (eds) Wood quality and its biological basis. CRC Press, Boca Raton.
41. Rayirath P, Avramidis S, Mansfield SD (2008) The effect of wood drying on crystallinity and microfibril angle in black spruce (Picea mariana). J Wood Chem Technol 28: 167-179.
42. Roe RJ (2000) Methods of X-ray and neutron scattering in polymer science. Oxford University Press, Oxford.
43. Rowell RM, Pettersen R, Han JS, Rowell JS, Tshabalala MA (2005) Cell wall chemistry. In: Rowell RM (ed) Handbook of wood chemistry and wood composites. CRC Press, Boca Raton.
44. Saranpää P (2003) Wood density and growth. In: Barnett JR, Jeronimidis G (eds) Wood quality and its biological basis. CRC Press, Boca Raton.
45. Schulz LG (1949) A direct method of determining preferred orientation of a flat reflection sample using a Geiger counter X-ray spectrometer. J Appl Phys 20: 1030-1033.
46. Segal L, Creely JJ, Martin AE Jr, Conrad CM (1959) An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer. Text Res J 29: 786-794.
47. Sixta H, Potthast A, Krotschek AW (2006) Chemical pulping processes. In: Sixta H (ed) Handbook of pulp. Wiley, Weinheim.
48. Skaar C (1988) Wood-water relations. Springer, Berlin.
49. Stevanic JS, Salmén L (2009) Orientation of the wood polymers in the cell wall of spruce wood fibres. Holzforschung 63: 497-503.
50. Tarkowski L, Laskosz L, Bonarski J (2004) Optimization of X-ray pole figure measurement. Mater Sci Forum 443-444: 137-140.
51. Taylor JR (1997) An introduction to error analysis: the study of uncertainties in physical measurements, 2nd edn. University Science Books, Sausalito.
52. Thygesen A, Oddershede J, Lilholt H, Thomsen AB, Ståhl K (2005) On the determination of crystallinity and cellulose content in plant fibres. Cellulose 12: 563-576.
53. Washusen R, Evans R (2001) Prediction of wood tangential shrinkage from cellulose crystallite width and density in one 11-year-old tree of Eucalyptus globulus Labill. Aust For 64: 123-126.
54. Yeh T-F, Braun JL, Goldfarb B, Chang H-M, Kadla JF (2006) Morphological and chemical variations between juvenile wood, mature wood, and compression wood of loblolly pine (Pinus taeda L.). Holzforschung 60: 1-8.
55. Yudianti R, Indrarti L (2008) Effect of water soluble polymer on structure and mechanical properties of bacterial cellulose composites. J Appl Sci 8: 177-180.
56. Zugenmaier P (2008) Crystalline cellulose and derivatives: characterization and structures. Springer, Berlin.