Chemical adhesion rather than mechanical retention enhances resin bond durability of a dental glass-ceramic with leucite crystallites

Biomedical Materials

Volumn 5, Issue 4, 2010, Pages

  Meng, X F ^a,b   Yoshida, K ^c   Gu, N ^b  

^a NANJING UNIVERSITY   (China)

^b Southeast University   (China)

^c NAGASAKI UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

ADHESION; BOND STRENGTH (MATERIALS); CRYSTALLITES; DEGRADATION; DURABILITY; FAILURE ANALYSIS; GLASS CERAMICS; HYDROFLUORIC ACID; RESINS; SHEAR STRENGTH; SURFACE MEASUREMENT; SURFACE ROUGHNESS; THREE DIMENSIONAL;

3D LASER SCANNING; ADHESIVE INTERFACES; BOND DURABILITY; BOND STRENGTH; BOND TEST; CERAMIC PLATES; CHEMICAL ADHESION; COHESIVE FAILURES; DENTAL GLASS CERAMICS; EFFECT OF CHEMICALS; HV-GROUP; MECHANICAL RETENTION; MICRO-SHEAR BOND STRENGTH; RESIN-BOND; ROUGH SURFACES; THERMAL WATERS;

BOND STRENGTH (CHEMICAL);

CEMENT; GLASS; HYDROFLUORIC ACID; RESIN; SILANE; WATER; ALUMINUM SILICATE; LEUCITE;

ADHESION; ANALYSIS OF VARIANCE; CERAMICS; CHEMICAL BOND; CONFERENCE PAPER; DENTAL EQUIPMENT; LASER MICROSCOPY; ARTICLE; CHEMICAL MODEL; CHEMISTRY; COMPUTER SIMULATION; CRYSTALLIZATION; MATERIALS TESTING; METHODOLOGY; SURFACE PROPERTY; TENSILE STRENGTH;

ADHESIVENESS; ALUMINUM SILICATES; CERAMICS; COMPUTER SIMULATION; CRYSTALLIZATION; HYDROFLUORIC ACID; MATERIALS TESTING; MODELS, CHEMICAL; RESINS, SYNTHETIC; SURFACE PROPERTIES; TENSILE STRENGTH;

EID: 79952117876     PISSN: 17486041     EISSN: 1748605X     Source Type: Journal    
DOI: 10.1088/1748-6041/5/4/044101     Document Type: Conference Paper

References (32)

1. Jensen M E, Sheth J J and Tolliver D 1989 Etched-porcelain resin-bonded full-veneer crowns: in vitro fracture resistance Compendium 10 336-8, 340-1 and 344-7
2. Matinlinna J P, Lassila L V, Özcan M, Yli-Urpo A and Vallittu P K 2004 An introduction to silanes and their clinical applications in dentistry Int. J. Prosthodont. 17 155-64 (Pubitemid 38490976)
3. Matinlinna J P and Vallittu P K 2007 Bonding of resin composites to etchable ceramic surfaces - an insight review of the chemical aspects on surface conditioning J. Oral Rehabil. 34 622-30
4. Kato H, Matsumura H, Tanaka T and Atsuta M 1996 Bond strength and durability of porcelain bonding systems J. Prosthet. Dent. 75 163-8
5. Foxton R M, Pereira P N, Nakajima M, Tagami J and Miura H 2002 Durability of the dual-cure resin cement/ceramic bond with different curing strategies J. Adhes. Dent. 4 49-59
6. Foxton R M, Pereira P N, Masatoshi N, Tagami J and Miura H 2002 Long-term durability of the dual-cured resin cement/silicon oxide ceramic bond J. Adhes. Dent. 4 125-35
7. Nakamura S, Yoshida K, Kamada K and Atsuta M 2004 Bonding between resin luting cement and glass infiltrated alumina-reinforced ceramics with silane J. Oral Rehabil. 31 785-9 (Pubitemid 39177677)
8. Ide T, Tanoue N, Yanagida H, Atsuta M and Matsumura H 2005 Effectiveness of bonding systems on bonding durability of a prefabricated porcelain material Dent. Mater. J. 24 257-60 (Pubitemid 41188620)
9. Yoshida K, Yamashita M and Atsuta M 2005 Bond strength between machinable glass-ceramic and dual-cured resin luting cements using silane coupling agents Am. J. Dent. 18 327-30 (Pubitemid 41759016)
10. Bertolotti R L, Lacy A M and Watanabe L G 1989 Adhesive monomers for porcelain repair Int. J. Prosthodont. 2 483-9
11. Stangel I, Nathanson D and Hsu C S 1987 Shear strength of the composite bond to etched porcelain J. Dent. Res. 66 1460-5
12. Al Edris A, Al Jaber A, Cooley R L and Barghi N 1990 SEM evaluation of etched patterns by three etchants on three porcelains J. Prosthet. Dent. 64 734-9
13. Thurmond J W, Barkmeier W W and Wilwerding T M 1994 Effect of porcelain surface treatments on bond strengths of composite resin bonded to porcelain J. Prosthet. Dent. 72 355-9
14. Roulet J F, Söderholm K J and Longmate J 1995 Effects of treatment and storage conditions on ceramic/composite bond strength J. Dent. Res. 74 381-7
15. Kupiec K A, Wuertz K M, Barkmeier W W and Wilwerding T M 1996 Evaluation of porcelain surface treatments and agents for composite-to-porcelain repair J. Prosthet. Dent. 76 119-24
16. Shahverdi S, Canay S, Sahin E and Bilge A 1998 Effects of different surface treatment methods on the bond strength of composite resin to porcelain J. Oral Rehabil. 25 699-705 (Pubitemid 128705311)
17. Kato H, Matsumura H, Ide T and Atsuta M 2001 Improved bonding of adhesive resin to sintered porcelain with the combination of acid etching and a two-liquid silane conditioner J. Oral Rehabil. 28 102-8 (Pubitemid 33754616)
18. Nagai T, Kawamoto Y, Kakehashi Y and Matsumura H 2005 Adhesive bonding of a lithium disilicate ceramic material with resin-based luting agents J. Oral Rehabil. 32 598-605 (Pubitemid 41032398)
19. Kukiattrackoon B and Thammasitboon K 2007 Effect of water storage and surface treatment on the tensile bond strength of IPS Empress 2 ceramic J. Prosthodont. 16 192-9
20. Brentel A S, Ozcan M, Valandro L F, Alarca L G, Amaral R and Bottino M A 2007 Microtensile bond strength of a resin cement to feldspathic ceramic after different etching and silanization regimens in dry and aged conditions Dent. Mater. 23 1323-31 (Pubitemid 47398916)
21. Hooshmand T, van Noort R and Keshvad A 2002 Bond durability of the resin-bonded and silane treated ceramic surface Dent. Mater. 18 179-88 (Pubitemid 40072295)
22. Kussano C M, Bonfante G, Batista J G and Pinto J H 2003 Evaluation of shear bond strength of composite to porcelain according to surface treatment Braz. Dent. J. 14 132-5
23. Attia A and Kern M 2004 Fracture strength of all-ceramic crowns luted using two bonding methods J. Prosthet. Dent. 91 247-52
24. Foxton R M, Nakajima M, Tagami J and Miura H 2005 Effect of acidic pretreatment combined with a silane coupling agent on bonding durability to silicon oxide ceramic J. Biomed. Mater. Res. B 73 97-103
25. Chen J H, Matsumura H and Atsuta M 1998 Effect of etchant, etching period and silane priming on bond strength to porcelain of composite resin Oper. Dent. 23 250-7 (Pubitemid 128686988)
26. Addison O, Marquis P M and Fleming G J 2007 The impact of hydrofluoric acid surface treatments on the performance of a porcelain laminate restorative material Dent. Mater. 23 461-8 (Pubitemid 46281286)
27. Peumans M, Hikita K, De Munck J, Van Landuyt K, Poitevin A, Lambrechts P and Van Meerbeek B 2007 Effects of ceramic surface treatment on the bond strength of an adhesive luting agent to CAD-CAM ceramic J. Dent. 35 282-8
28. Chen J H, Matsumura H and Atsuta M 1998 Effect of different etching periods on the bond strength of a composite resin to a machinable porcelain J. Dent. 26 53-8 (Pubitemid 128394265)
29. Lu H, Mehmood A, Chow A and Power J M 2005 Influence of polymerization mode on flexural properties of esthetic resin cements J. Prosthet. Dent. 94 549-54
30. Meng X, Yoshida K and Atsuta M 2008 Influence of ceramic thickness on mechanical properties and polymer structure of dual-cured resin agents Dent. Mater. 24 594-8
31. Ishida H and Koenig J L 2003 A Fourier-transform infrared spectroscopic study of the hydrolytic stability of silane coupling agents on E-glass fibres J. Polym. Sci. B 18 1931-43
32. Nishiyama N, Ishizaki T, Horie K, Tomari M and Someya M 1991 Novel polyfunctional silanes for improved hydrolytic stability at the polymer-silica interface J. Biomed. Mater. Res. 25 213-21