Impression materials in fixed prosthodontics: Influence of choice on clinical procedure

Journal of Prosthodontics

Volumn 20, Issue 2, 2011, Pages 153-160

  Hamalian, Techkouhie A ^a   Nasr, Elie ^b   Chidiac, José J ^c  

^a Columbia University College of Dental Medicine ^*  (United States)

^b SAINT JOSEPH UNIVERSITY   (Lebanon)

^c LEBANESE UNIVERSITY   (Lebanon)

Author keywords

Fixed prosthodontics; Impression; Models; Physical properties

Indexed keywords

BIOMEDICAL AND DENTAL MATERIALS; ETHER DERIVATIVE; POLYVINYL DERIVATIVE; SILICONE DERIVATIVE; SILOXANE; SULFIDE; VINYL POLYSILOXANE;

ARTICLE; CHEMICAL PHENOMENA; CHEMISTRY; CLASSIFICATION; DENTAL PROCEDURE; DENTURE; DRUG INCOMPATIBILITY; ELASTICITY; FLOW KINETICS; HUMAN; REPRODUCIBILITY; STANDARD; VISCOSITY;

DENTAL IMPRESSION MATERIALS; DENTAL MODELS; DENTURE, PARTIAL, FIXED; DRUG INCOMPATIBILITY; ELASTICITY; ETHERS; HUMANS; HYDROPHOBIC AND HYDROPHILIC INTERACTIONS; POLYVINYLS; REPRODUCIBILITY OF RESULTS; RHEOLOGY; SILICONES; SILOXANES; SULFIDES; VISCOSITY;

EID: 79951564434     PISSN: 1059941X     EISSN: 1532849X     Source Type: Journal    
DOI: 10.1111/j.1532-849X.2010.00673.x     Document Type: Article

References (94)

1. German MJ, Carrick TE, McCabe JF: Surface detail reproduction of elastomeric impression materials related to rheological properties. Dent Mater 2008;24:951-956
2. Rubel BS: Impression materials: a comparative review of impression materials most commonly used in restorative dentistry. Dent Clin North Am 2007;51:629-646
3. Tjan AH, Li T, Logan GI, et al: Marginal accuracy of complete crowns made from alternative casting alloys. J Prosthet Dent 1991;66:157-164
4. Tinschert J, Natt G, Mautsch W, et al: Marginal fit of alumina- and zirconia-based fixed partial dentures produced by a CAD/CAM system. Oper Dent 2001;26:367-374
5. Gelbard S, Aoskar Y, Zalkind M, et al: Effect of impression materials and techniques on the marginal fit of metal castings. J Prosthet Dent 1994;71:1-6
6. Clancy JM, Scandrett FR, Ettinger RL: Long-term dimensional stability of three current elastomers. J Oral Rehabil 1983;10:325-333
7. Lin CC, Donegan SJ, Dhuru VB: Accuracy of impression materials for complete-arch fixed partial dentures. J Prosthet Dent 1988;59:288-291
8. Christensen GJ: What category of impression material is best for your practice? J Am Dent Assoc 1997;128:1026-1028
9. Mandikos MN: Polyvinylsiloxane impression materials: an update on clinical use. Aust Dent J 1998;43:428-434
10. Craig RG: Restorative Dental Materials (ed 11). St Louis, Elsevier, 2001, p. 12
11. Anusavice KJ: Philips' Science of Dental Materials (ed 11). Philadelphia, Saunders, 2003, p. 12
12. Panichuttra R, Jones RM, Goodacre C, et al: Hydrophobic polyvinyl siloxane impression materials: dimensional accuracy, wettability, and effect on gypsum hardness. Int J Prosthodont 1991;4:240-248
13. Donovan TE, Chee WWL: A review of contemporary impression materials and techniques. Dent Clin N Am 2004;48:445-470
14. Pant R, Juszczyk AS, Clark RFK, et al: Long-term dimensional stability and reproduction of surface detail of four polyvinyl siloxane duplicating materials. J Dent 2008;36:456-461
15. Chee WWL, Donovan TE: Fine detail reproduction of very high viscosity polyvinylsiloxane impression materials. Int J Prosthodont 1989;2:368-370
16. Klooster J, Logan GI, Tjan AH: Effects of strain rate on the behavior of elastomeric impressions. J Prosthet Dent 1991;66:292-298
17. McCabe JF, Ariwaka H: Rheological properties of elastomeric impression materials before and during setting. J Dent Res 1998;77:1874-1880
18. Shen C: Impression materials. In: Anusavice KJ (ed): Philips' Science of Dental Materials (ed 11). Philadelphia, Saunders, 2003, pp. 210-230
19. Craig RG, Urquiola NJ, Liu CC: Comparison of commercial elastomeric impression materials. Oper Dent 1990;15:94-104
20. Williams PT. Jackson DG, Bergman W: An evaluation of the time-dependant dimensional stability of eleven elastomeric impression materials. J Prosthet Dent 1984;52:120-125
21. Derrien G, Le Menn G: Evaluation of detail reproduction for three die materials by using scanning electron microscopy and two-dimensional profilometry. J Prosthet Dent 1995;74:1-7
22. Lacy AM, Bellman T, Fukui H, et al: Time-dependent accuracy of elastomeric impression materials. Part II. Polyether, polysulfides, and polyvinyl siloxane. J Prosthet Dent 1981;45:329-333
23. Williams PT, Jackson DG, Bergman W: An evaluation of the time-dependent dimensional stability of eleven elastomeric materials. J Prosthet Dent 1984;52:120-125
24. Giordano R 2nd: Impression materials: basic properties. Gen Dent 2000;48:510-516
25. McMurry J: Fundamentals of Organic Chemistry (ed 4). Pacific Grove, CA, Brooks/Cole Publishing Co., 1998, pp. 36-45
26. Anusavice KJ: Phillips' Science of Dental Materials (ed 11). Philadelphia, Saunders, 2003, pp. 205-231
27. McCabe JF, Carrick TE: Recording surface detail on moist surfaces with elastomeric impression materials. Eur J Prosthodont Restor Dent 2006;14:42-46
28. Walker MP, Petrie CS, Haj-Ali R, et al: Moisture effect on polyether and polyvinylsiloxane dimensional accuracy and detail reproduction. J Prosthodont 2005;14:158-163
29. Pratten DH, Craig RG: Wettability of a hydrophilic addition silicone impression material. J Prosthet Dent 1989;61:197-202
30. Mc Murry J: Fundamentals of Organic Chemistry: Their Correlation with Chemical Structure (ed 4). Pacific Grove, CA, Brooks/Cole Publishing, 1998, pp. 36-45
31. Johnson GH, Lepe X, Aw TC: The effect of surface moisture on detail reproduction of elastomeric impressions. J Prosthet Dent 2003;90:354-364
32. Peutzfeldt A, Asmussen E: Impression materials: effect of hydrophilicity and viscosity on ability to displace water from dentin surfaces. Scand J Dent Res 1988;96:253-259.
33. Boening KW, Walter MH, Schuette U: Clinical significance of surface activation of silicone impression materials. J Dent 1998;26:447-452
34. Mandikos MN: Polyvinyl siloxane impression materials:an update on clinical use. Aust Dent J 1998;43:428-434
35. Craig RG, O'Brien WJ, Powers JM: Dental Materials. Properties and Manipulation (ed 6). St. Louis, Mosby, 1996, pp. 136-177
36. Craig RG, Powers JM: Restorative Dental Materials (ed 11). St Louis, Mosby, 2001, pp. 348-367
37. Pratten DH, Craig RG: Wettability of a hydrophilic addition silicone impression material. J Prosthet Dent 1989;61:197-202
38. Panichuttra R, Jones RM, Goodacre C, et al: Hydrophilic poly(vinyl siloxane) impression materials:dimensional accuracy, wettability, and effect on gypsum hardness. Int J Prosthodont 1991;4:240-248
39. Ritter AV, Swift EJ Jr: Medium-viscosity polyether impression material: a case report. Compend Contin Educ Dent 2000;21:993-996, 998, 1000
40. Chee WWL, Donavan TE: Polyvinylsiloxane impression materials: a review of properties and techniques. J Prosthet Dent 1992;68:728-732
41. Balkenhol M, Haunschild S, Lochnit G, et al: Surfactant release from hydrophilized vinylpolysiloxanes. J Dent Res 2009; 88:668-672
42. Walker MP, Petrie CS, Haj-Ali R, et al: Moisture effect on plyether and polyvinylsiloxane dimensional accuracy and detail reproduction. J Prosthodont 2005;14:158-163
43. Shillingburg HT, Hobo S, Whitsett, LD, et al: Fundamentals of Fixed Prosthodontics (ed 3). Chicago, Quintessence, 1997, pp. 299-300
44. Petrie CS, Walker MP, O'Mahony AM, et al: Dimensional accuracy and surface detail reproduction of two hydrophilic vinyl siloxane impression materials tested under dry, moist and wet conditions. J Prosthet Dent 2003;90:365-372
45. Bindl A, Mormann WH: Marginal and internal fit of all-cermaic CAD/Cam crown copings on chmafer preparations. J Oral Rehabil 2005;32:441-447
46. Boeckler AF, Stadler A, Jurgen M: The significance of marginal gap and overextension measurement in the evaluation of the fit of complete crowns. J Contemp Dent Pract 2005;6:1-12
47. Michalakis KX, Bakopoulou A, Hirayama H, et al: Pre and post set hydrophilicity of elastomeric impression materials. J Prosthodont 2007;16:238-248
48. Zech J, Reusch B: Rheological properties of different type 3 PVS [sic] impression materials. J Dent Res 1999;78:317(Abstract no 1692). Cited in: Martinez JE, Combe EC, Pesun IJ: Rheological properties of vinyl polysiloxane impression pastes. Dent Mater 2001;17:471-476
49. Braden M: Characterization of the setting process in dental polysulfide rubbers. J Dent Res 1966;45:1065-1071
50. Omori K, Arikawa H: Rheological properties of elastomeric impression materials based on surface compressive strength. J Oral Rehabil 2001;28:320-327
51. Herfort TW, Gerberich WW, Macosko CW, et al: Viscosity of elastomeric impression materials. J Prosthet Dent 1977;38:396-404
52. Craig RG: Restorative Dental Materials (ed 11). St. Louis, Mosby, 2001, pp. 330-369
53. Powers JM, Wataha JC: Dental Materials. Properties and Manipulation (ed 7). St. Louis, Mosby, 2000, pp. 139-140, 162-177
54. Lepe X, Johnson GH, Berg JC: Surface characteristics of polyether and addition silicone impression materials after long term disinfection. J Prothet Dent 1995;74:181-186
55. Lepe X, Johnson GH, Berg JC, et al: Wettability, imbibitions and mass change of disinfected low viscosity impression materials. J Prosthet Dent 2002;88:268-276
56. Darby R: Viscoelastic Fluids: An Introduction to Their Properties and Behavior. New York, Dekker, 1976, pp. 76-77
57. Chai J, Takahashi Y, Lautemschlager EP: Clinically relevant mechanical properties of elastomeric impression material. Int J Prosthodont 1998;11:219-223
58. Little J: Dental Management of the Medically Compromised Patient (ed 6). St. Louis, Elsevier, 2002, pp. 545-547
59. Hondrum SO: Tear and energy properties of three impression materials. Int J Prosthodont 1994;7:517-552
60. de Carnago LM, Chee WWL, Donovan TE: Inhibition of polymerisation of polyvinylsiloxane by medicaments used on gingival retraction cords. J Prosthet Dent 1993;70:114-117
61. Bertschinger C, Paul SJ, Luthy H, et al: Dual application of dentin bonding agents. Effect on bond strength. Am J Dent 1996;9:115-119
62. Paul SJ, Schärer P: The dual bonding technique. A modified method to improve adhesive luting procedures. Int J Periodontics Restorative Dent 1997;17:536-545
63. Kahn RL, Donovan TE: A pilot study of polymerization inhibition of poly (vinyl siloxane) materials by latex gloves. Int J Prosthodont 1989;2:128-130
64. Kahn RL, Donovan TE, Chee WWL: Interaction of gloves and rubber dam with poly (vinyl siloxane) impression material: a screening test. Int J Prosthodont 1989;2:342-346
65. Noonan JE, Goldfogel MH, Lambert RL: Inhibited set of the surface of addition silicones in contact with rubber dam. Oper Dent 1986;2:46-48
66. Reitz CD, Clark NP: The setting of vinyl polysiloxane and condensation silicone putties when mixed with gloved hands. J Am Dent Assoc 1988;116:371-375
67. Chee WWL, Donovan TE, Kahn RL: Indirect inhibition of polymerization of a polyvinyl impression material: a case report. Quintessence Int 1991;22:133-135
68. Kahn RL, Donovan TE: A Pilot study of polymerization inhibition of poly (vinyl siloxane) materials by latex gloves. Int J Prosthodont 1989;2:128-130
69. Kahn RL, Donovan TE, Chee WWL: Interaction of latex gloves and poly (vinyl siloxane) impression materials: a screening survey. Int J Prosthodont 1989;2:342-346
70. Baumann MA: The influence of dental gloves on the setting of impression materials. Br Dent J 1995;179:130-135
71. Powers JM, Sakaguchi RL: Impression materials. In Powers JM, Sakaguchi RL (eds): Craig's Restorative Dental Materials (ed 12). St. Louis, Mosby, 2006, pp. 294-295
72. Phoenix RD: Stewart's Clinical Removable Partial Prosthodontics (ed 3). Chicago, Quintessence, 2002, pp. 162-167
73. Adabo GL, Zanarotti E, Fonseca RG, et al: Effect of disinfectant agents on dimensional stability of elastomeric impression materials. J Prosthet Dent 1999;81:621-624
74. Johnson GH, Drennon DG, Powell GL: Accuracy of elastomeric impression materials disinfected by immersion. J Am Dent Assoc 1988;116:525-530
75. Cottone JA, Molinari JA: State-of-the-art infection control in dentistry. J Am Dent Assoc 1991;122:33-41
76. Hembree JH, Jr., Nunez LJ: Effect of moisture on polyether impression materials. J Am Dent Assoc 1974;89:1134-1136
77. Noonan JE, Goldfogel MH, Lambert RL: Inhibited set of the surface of addition silicones in contact with rubber dam. Oper Dent 1986;2:46-48
78. Neissen LC, Strassler H, Levinson PD, et al: Effect of latex gloves on setting time of polyvinylsiloxane putty impression material. J Prosthet Dent 1986;55:128-129
79. Reitz CD, Clark NP: The setting of vinyl-polysiloxane and condensation silicone putties when mixed with gloved hands. J Am Dent Assoc 1988;116:371-375
80. Kahn RL, Donovan TE: A pilot study of polymerization inhibition of poly (vinyl siloxane) materials by latex gloves. Int J Prosthodont 1989;2:128-130
81. Anusavice KJ: Phillips' Science of Dental Materials (ed 11). Philadelphia, Saunders, 2003, p. 216
82. Boening KW, Walter MH, Schuette U: Clinical significance of surface activation of silicone impression materials. J Dent 1998;26:447-452
83. Lacy AM, Fukui H, Bellman T, et al: Time-dependant accuracy of elastomeric impression materials. Part II: polyether, polysulfides, and polyvinylsiloxane. J Prosthet Dent 1981;45:329-333
84. Donovan TE: A review of contemporary impression materials. Calif Inst Cont Educ 1988;27:9-19
85. Chew CL, Chee WWL, Donovan TE: The influence of temperature on the dimensional stability of poly (vinyl-siloxane) impression materials. Int J Prosthodont 1993;6:528-532
86. Spranley TJ, Gettleman L, Zimmerman KL: Acute tissue irritation of polysulfide rubber impression materials. J Dent Res 1983;62:548-551
87. Ciesco JN, Mlaone WF, Sandrik JL, et al: Comparison of elasotmeric materials used in fixed prosthodontics. J Prosthet Dent 1981;45:89-94
88. Nayyar A, Tomlins CD, Fairhurst CW, et al: Comparison of some properties of polyether and polysulfide materials. J Prosthet Dent 1979;42:163-167
89. Wöstmann B: Zum gegenwärtigen stand der abformung in der zahnheilkunde. Berlin, Quintessenz, 1998. In: A Guideline for Excellent Impressions in Theory and Practice. Espertise Magazine. Minneapolis, 3M ESPE 2008:1-60
90. ISO 4823 for Elastomeric Impression Materials. International Organization for Standardization (ISO) Technical Committee: Tc 106/Sc 2; 2000
91. Craig RG: Evaluation of an automatic mixing system for an addition silicone impression material. J Am Dent Assoc 1985;110:213-215
92. Soh G, Chong YH: Defects in automixed addition silicone elastomers prepared by puttywash impression technique. J Oral Rehabil 1991;18:547-553
93. Keck SC: Automixing: A new concept in elastomeric impression material delivery system. J Prosthet Dent 1985;54:479-483
94. Di Felice R, Scotti R, Belser UC: The influence of the mixing technique on the content of voids in two polyether. Schweiz Monatsschr Zahnmed 2002;112:12-16