Copolyimide mixed matrix membranes with oriented microporous titanosilicate JDF-L1 sheet particles

Journal of Membrane Science

Volumn 370, Issue 1-2, 2011, Pages 131-140

  Galve, Alejandro ^a   Sieffert, Daniel ^b   Vispe, Eugenio ^c   Téllez, Carlos ^a   Coronas, Joaquín ^a   Staudt, Claudia ^b  

^a UNIVERSITY OF ZARAGOZA   (Spain)

^b HEINRICH HEINE UNIVERSITY   (Germany)

^c CSIC UZA Instituto de Sintesis Quimica y Catalisis Homogenea ISQCH   (Spain)

Author keywords

Copolyimide; Gas permeation; JDF L1; Microporous titanosilicate; Mixed matrix membrane; Zeolite

Indexed keywords

COPOLYIMIDE; GAS PERMEATION; JDF-L1; MICROPOROUS; MIXED MATRIX MEMBRANES;

CRYSTAL ORIENTATION; CRYSTALLOGRAPHY; FILLED POLYMERS; MICROPOROSITY; PERMEATION; POLYIMIDES; RAMAN SPECTROSCOPY; SURFACE ACTIVE AGENTS; X RAY DIFFRACTION;

GAS PERMEABLE MEMBRANES;

CETRIMIDE; FILLER; HYDROGEN; JDF L1; METHANE; NITROGEN; OXYGEN; POLYIMIDE; SILICATE; UNCLASSIFIED DRUG;

ARTICLE; CRYSTAL STRUCTURE; MICROPORE FILTER; MICROSCOPY; PRIORITY JOURNAL; QUANTITATIVE ANALYSIS; RAMAN SPECTROMETRY; SEPARATION TECHNIQUE; X RAY DIFFRACTION;

EID: 79951551685     PISSN: 03767388     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.memsci.2011.01.011     Document Type: Article

References (40)

1. Chung T.S., Jiang L.Y., Li Y., Kulprathipanja S. Mixed matrix membranes (MMMs) comprising organic polymers with dispersed inorganic fillers for gas separation. Prog. Polym. Sci. 2007, 32:483.
2. Robeson L.M. The upper bound revisited. J. Membr. Sci. 2008, 320:390.
3. Yang C.F., Smyrl W.H., Cussler E.L. Flake alignment in composite coatings. J. Membr. Sci. 2004, 231:1.
4. Jeong H.K., Krych W., Ramanan H., Nair S., Marand E., Tsapatsis M. Fabrication of polymer/selective-flake nanocomposite membranes and their use in gas separation. Chem. Mater. 2004, 16:3838.
5. Frankel I., Brenner H. Taylor dispersion of orientable Brownian particles in unbounded homogeneous shear flows. J. Fluid Mech. 1993, 255:129.
6. Johnson J.R., Koros W.J. Utilization of nanoplatelets in organic-inorganic hybrid separation materials: separation advantages and formation challenges. J. Taiwan Inst. Chem. Eng. 2009, 40:268.
7. Sheffel J.A., Tsapatsis M. A model for the performance of microporous mixed matrix membranes with oriented selective flakes. J. Membr. Sci. 2007, 295:50.
8. Choi J., Tsapatsis M. MCM-22/silica selective flake nanocomposite membranes for hydrogen separations. J. Am. Chem. Soc. 2010, 132:448.
9. Corma A., Fornes V., Pergher S.B., Maesen T.L.M., Buglass J.G. Delaminated zeolite precursors as selective acidic catalysts. Nature 1998, 396:353.
10. Fan W.B., Wu P., Namba S., Tatsumi T. Synthesis and catalytic properties of a new titanosilicate molecular sieve with the structure analogous to MWW-type lamellar precursor. J. Catal. 2006, 243:183.
11. Liu L., Cheng M.J., Ma D., Hu G., Pan X.L., Bao X.H. Synthesis, characterization, and catalytic properties of MWW zeolite with variable Si/Al ratios. Micropor. Mesopor. Mater. 2006, 94:304.
12. Wu P., Nuntasri D., Ruan J.F., Liu Y.M., He M.Y., Fan W.B., Terasaki O., Tatsumi T. Delamination of Ti-MWW and high efficiency in epoxidation of alkenes with various molecular sizes. J. Phys. Chem. B 2004, 108:19126.
13. Hudiono Y., Choi S., Shu S., Koros W.J., Tsapatsis M., Nair S. Porous layered oxide/Nafion (R) nanocomposite membranes for direct methanol fuel cell applications. Micropor. Mesopor. Mater. 2009, 118:427.
14. Choi S., Coronas J., Jordan E., Oh W., Nair S., Onorato F., Shantz D.F., Tsapatsis M. Layered silicates by swelling of AMH-3 and nanocomposite membranes. Angew. Chem. Int. Ed. 2008, 47:552.
15. Rubio C., Casado C., Gorgojo P., Etayo F., Uriel S., Téllez C., Coronas J. Exfoliated titanosilicate material UZAR-S1 obtained from JDF-L1. Eur. J. Inorg. Chem. 2010, 159.
16. Rocha J., Anderson M.W. Microporous titanosilicates and other novel mixed octahedral-tetrahedral framework oxides. Eur. J. Inorg. Chem. 2000, 801.
17. Rocha J., Lin Z. Microporous mixed octahedral-pentahedral-tetrahedral framework silicates. Rev. Miner. Geochem. 2005, 57:173.
18. Veltri M., Vuono D., De Luca P., Nagy J.B., Nastro A. Typical data of a new microporous material obtained from gels with titanium and silicon. J. Therm. Anal. Calorim. 2006, 84:247.
19. Roberts M.A., Sankar G., Thomas J.M., Jones R.H., Du H., Chen J., Pang W., Xu R. Synthesis and structure of a layered titanosilicate catalyst with five-coordinate titanium. Nature 1996, 381:401.
20. Ferdov S., Kolitsch U., Lengauer C., Tillmanns E., Lin Z., Ferreira R.A.S. Refinement of the layered titanosilicate AM-1 from single-crystal X-ray diffraction data. Acta Crystallogr., Sect. E: Struct. Rep. Online 2007, 63:I186.
21. Rubio C., Casado C., Uriel S., Téllez C., Coronas J. Seeded synthesis of layered titanosilicate JDF-L1. Mater. Lett. 2009, 63:113.
22. Philippou A., Anderson M.W. Aldol-type reactions over basic microporous titanosilicate ETS-10 type catalysts. J. Catal. 2000, 189:395.
23. Di Serio M., Tesser R., Pengmei L., Santacesaria E. Heterogeneous catalysts for biodiesel production. Energy Fuels 2008, 22:207.
24. Waghmode S.B., Vetrivel R., Hegde S.G., Gopinath C.S., Sivasanker S. Physicochemical investigations of the basicity of the cation exchanged ETS-10 molecular sieves. J. Phys. Chem. B 2003, 107:8517.
25. Anson A., Lin C.C.H., Kuznicki S.M., Sawada J.A. Adsorption of carbon dioxide, ethane, and methane on titanosilicate type molecular sieves. Chem. Eng. Sci. 2009, 64:3683.
26. DeRocher J.P., Gettelfinger B.T., Wang J.S., Nuxoll E.E., Cussler E.L. Barrier membranes with different sizes of aligned flakes. J. Membr. Sci. 2005, 254:21.
27. Yang L., Fang J., Meichin N., Tanaka K., Kita H., Okamoto K. Gas permeation properties of thianthrene-5,5,10,10-tetraoxide-containing polyimides. Polymer 2001, 42:2021.
28. Yoshino M., Nakamura S., Kita H., Okamoto K., Tanihara N., Kusuki Y. Olefin/paraffin separation performance of carbonized membranes derived from an asymmetric hollow fiber membrane of 6FDA/BPDA-DDBT copolyimide. J. Membr. Sci. 2003, 215:169.
29. 4 separation. J. Membr. Sci. 2003, 222:133.
30. Hess S., Staudt-Bickel C., Lichtenthaler R.N. Propene/propane separation with copolyimide membranes containing silver ions. J. Membr. Sci. 2006, 275:52.
31. Munoz D.M., Maya E.M., de Abajo J., de la Campa J.G., Lozano A.E. Thermal treatment of poly(ethylene oxide)-segmented copolyimide based membranes: an effective way to improve the gas separation properties. J. Membr. Sci. 2008, 323:53.
32. Kashimura Y., Aoyama S., Kawakami H. Gas transport properties of asymmetric block copolyimide membranes. Polym. J. 2009, 41:961.
33. Tanaka K., Okano M., Toshino H., Kita H., Okamoto K.I. Effect of methyl substituents on permeability and permselectivity of gases in polyimides prepared from methyl-substituted phenylenediamines. J. Polym. Sci., Part B: Polym. Phys. 1992, 30:907.
34. 4 separation characteristics of polyimides by chemical crosslinking. J. Membr. Sci. 1999, 155:145.
35. Staudt-Bickel C. Cross-linked copolyimide membranes for the separation of gaseous and liquid mixtures. Soft Mater. 2003, 1:277.
36. Stern S.A., Mi Y., Yamamoto H., Stclair A.K. Structure permeability relationships of polyimide membranes. Applications to the separation of gas-mixtures. J. Polym. Sci., Part B: Polym. Phys. 1989, 27:1887.
37. Wieneke J.U., Staudt C. Thermal stability of 6FDA-(co-)polyimides containing carboxylic acid groups. Polym. Degrad. Stab. 2010, 95:684.
38. Lin Z., Rocha J., Brandao P., Ferreira A., Esculcas A.P., de Jesus J.D.P., Philippou A., Anderson M.W. Synthesis and structural characterization of microporous umbite, penkvilksite, and other titanosilicates. J. Phys. Chem. B 1997, 101:7114.
39. Amberg-Schwab S., Weber U., Burger A., Nique S., Xalter R. Development of passive and active barrier coatings on the basis of inorganic-organic polymers. Monatsh. Chem. 2006, 137:657.
40. Cussler E.L. Membranes containing selective flakes. J. Membr. Sci. 1990, 52:275.