Non-quadratic Kelvin modes based plasticity criteria for anisotropic materials

International Journal of Plasticity

Volumn 27, Issue 3, 2011, Pages 328-351

  Desmorat, Rodrigue ^a   Marull, Roxane ^a,b  

^a CNRS   (France)

^b SNECMA   (France)

Author keywords

Anisotropic materials; CMSX2 superalloy; Cubic symmetry; Kelvin modes; Yield criterion

Indexed keywords

ANISOTROPIC MATERIAL; CMSX2 SUPERALLOY; CUBIC SYMMETRY; KELVIN MODES; YIELD CRITERION;

CRYSTAL ORIENTATION; MATERIALS; OPTICAL ANISOTROPY; PLASTICITY; SUPERALLOYS; YIELD STRESS;

SINGLE CRYSTALS;

EID: 79951551566     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2010.06.003     Document Type: Article

References (56)

1. H. Aretz, O.S. Hopperstad, and O.S. Lademo Yield function calibration for orthotropic sheet metals based on uniaxial and plane strain tensile tests J. Mater. Process. Technol. 186 2007 221 235 (Pubitemid 46330735)
2. Y.P. Arramon, M.M. Mehrabadi, D.W. Martin, and S.C. Cowin A multidimensional anisotropic strength criterion based on kelvin modes Int. J. Solids Struct. 37 2000 2915 2935 (Pubitemid 30562863)
3. D. Banabic, T. Kuwabara, T. Balan, D.S. Comsa, and D. Julean Non-quadratic yield criterion for orthotropic sheet metals under plane-stress conditions Int. J. Mech. Sci. 45 5 2003 797 811
4. G. Bande, and J.A. Nemes A new approach for single crystal materials analysis: theory and application to initial yielding J. Eng. Mater. Technol. 127 2005 119 129 (Pubitemid 40421717)
5. F. Barlat, D.J. Lege, and J.C. Brem A six-component yield function for anisotropic materials Int. J. Plasticity 7 1991 693 712
6. F. Barlat, Y. Maeda, K. Chung, M. Yanagawa, J.C. Brem, Y. Hayashida, D.J. Lege, K. Matsui, S.J. Murtha, S. Hattori, R.C. Becker, and S. Makosey Yield function development for aluminum alloy sheets J. Mech. Phys. Solids 45 1997 1727 1763 (Pubitemid 127397158)
7. F. Barlat, H. Aretz, J.W. Yoon, M.E. Karabin, J.C. Brem, and R.E. Dick Linear transformation-based anisotropic yield functions Int. J. Plasticity 21 2005 1009 1039 (Pubitemid 40034583)
8. A. Bertram, and J. Olschewski Anisotropic creep modelling of the single crystal superalloy SRR99 Comput. Mater. Sci. 5 1996 12 16 (Pubitemid 126411554)
9. D. Bettge, and W. Oesterle 'cube slip' in near-[1 1 1] oriented specimens of a single-crystal nickel-base superalloy Scripta Mater. 40 1999 389 395
10. M.W. Biegler, and M.M. Mehrabadi An energy-based constitutive model for anisotropic solids subject to damage Mech. Mater. 19 1995 151 164
11. S. Boumaiza, J.P. Cordebois, M. Brunet, and G. Nefussi Analytical and numerical study on plastic instabilities for axisymmetric tube bulging Int. J. Mech. Sci. 48 2006 674 682
12. Brien, V., 1995. Étude par microscopie électronique transmission des mécanismes de déformation d'un superalliage base de nickel en fatigue oligocyclique haute température. Université Paris XI Orsay Ph.D., Orsay.
13. F. Bron, and J. Besson Int. J. Plasticity 20 2004 937 963
14. O. Cazacu, and F. Barlat Application of the theory of representation to describe yielding of anisotropic aluminium alloys Int. J. Eng. Sci. 41 2003 2027 2045
15. O. Cazacu, and F. Barlat A criterion for description of anisotropy and yield differential effects in pressure-insensitive metals Int. J. Plasticity 20 11 2004 1367 1385
16. O. Cazacu, B. Plunkett, and F. Barlat Orthotropic yield criterion for hexagonal closed packed metals Int. J. Plasticity 22 7 2006 1171 1194 (Pubitemid 43292535)
17. Cowin, S., Mehrabadi, M., Sadegh, A., 1991. Kelvin's formulation of the anisotropic Hooke's law. SIAM J. In: Wu, J., Ting, T., Barnett, D. Soc. Ind. Appl. Math.
18. R. Desmorat Dissymétrie de comportement élastique anisotrope couplé ou non l'endommagement C.R.A.S., Série IIb 328 2000 445 450
19. R. Desmorat Kelvin decomposition and multiple effective stresses concept in anisotropic materials C.R. Mécanique 337 2009 733 738
20. B. Desmorat, and G. Duvaut Compliance optimization with nonlinear elastic materials: application to constitutive laws dissymmetric in tension-compression Eur. J. Mech. - A/Solids 22 2003 179 192
21. D.C. Drucker The relation of experiments to mathematical theories of plasticity J. Appl. Mech., Trans. ASME 71 1949 349 357
22. M. Durand-Charre The Microstructure of Superalloys 1997 Gordon and Breach Science Publishers Amsterdam
23. Franois, M., 1995. Identification des symétries matérielles de matériaux anisotropes. Université Paris VI Ph.D., Cachan.
24. Hanriot, F., 1993. Comportement du superalliage monocristallin AM1 sous sollicitations cycliques. École Nationale Supérieure des Mines de Paris Ph.D., Évry.
25. A.V. Hershey The plasticity of an isotropic aggregate of anisotropic face-centered cubic crystals J. Appl. Mech. 21 1954 241 249
26. R. Hill A theory of the yielding and plastic flow of anisotropic metals Proc. Roy. Soc. Lond. 1948
27. R. Hill The Mathematical Theory of Plasticity 1950 Clarendon Press
28. R. Hill Theoretical plasticity of textured aggregates Math. Proc. Cambridge Philos. Soc. 85 1 1979 179 191
29. G. Hoinard, R. Estevez, and P. Franciosi Hardening anisotropy of γ/γ′ superalloy single crystals - 1. Experimental estimates at 650 °C from a homogeneous analysis Acta Metall. Mater. 43 1995 1593 1607
30. W.F. Hosford A generalized isotropic yield criterion J. Appl. Mech. 39 1972 607 609
31. W.F. Hosford On the crystallographic basis of yield criteria Texture. Microstruct. 1996 479 493
32. W. Hu An orthotropic yield criterion in a 3-D general stress state Int. J. Plasticity 21 9 2005 1771 1796 (Pubitemid 40643264)
33. Kaminski, M., 2007. Modélisation de l'endommagement en fatigue des superalliages monocristallins pour aubes de turbines en zone de concentration de contrainte. Ph.D. École Nationale Supérieure des Mines de Paris.
34. A.P. Karafillis, and M.C. Boyce A general anisotropic yield criterion using bounds and a transformation weighting tensor J. Mech. Phys. Solids 41 1993 1859 1886
35. O.-G. Lademo, O.S. Hopperstad, and M. Langseth An evaluation of yield criteria and flow rules for aluminium alloys Int. J. Plasticity 15 2 1999 191 208
36. J. Lemaitre, J.-L. Chaboche, A. Benallal, and R. Desmorat Mécanique des Matériaux Solides 2009 Dunod Paris
37. R. Mahnken Anisotropic creep modeling based on elastic projection operators with applications to CMSX-4 superalloy Comput. Methods Appl. Mech. Eng. 191 2002 1611 1637 (Pubitemid 34175896)
38. N. Marchal Crack-tip stress-strain fields in single crystal nickel-base superalloys at high temperature under cyclic loading Comput. Mater. Sci. 37 2006 42 50 (Pubitemid 43947562)
39. Marchal, N., 2006b. Propagation de fissures en fatigue-fluage haute température de superalliages monocristallins base de nickel. École Nationale Supérieure des Mines de Paris Ph.D., Évry.
40. M. Mehrabadi, and S. Cowin Eigentensors of linear anisotropic elastic materials Quart. J. Mech. Appl. Math. 43 1990 15 41 (Pubitemid 20682720)
41. L. Méric, P. Poubanne, and G. Cailletaud Single crystal modeling for structural calculations: part 1 - model presentation J. Eng. Mater. Technol. 113 1991 162 170
42. D. Nouailhas, and G. Cailletaud Tension-torsion behavior of single crystal superalloys: experiment and finite element analysis Int. J. Plasticity 11 1995 451 470
43. Nouailhas, D., Culie, J.P., 1991. Development and Application of a Model for Single-crystal Superalloys, MD-vol. 26. ASME Publication, AMD 121, p. 151.
44. W. Oesterle, D. Bettge, B. Fedelich, and H. Klingelhoeffer Modelling the orientation and direction dependance of the critical resolved shear stress of nickel-base superalloy single crystals Acta Mater. 48 2000 689 700 (Pubitemid 30556099)
45. Poubanne, P., 1989. Étude et modélisation du comportement mécanique d'un superalliage monocristallin pour aube de turbine. École Centrale Paris Ph.D., Châtillon.
46. J. Rychlewski On hooke's law Prikl. Matem. Mekhan. 48 1984 303 314
47. E. Schmid, and W. Boas Kristallplastizitaet mit besonderer Beruecksichtigung der Metalle 1935
48. M.Y. Sheh, and D.C. Stouffer A crystallographic model for the tensile and fatigue response for rene N4 at 982 °C J. Appl. Mech. 57 1990 25 31 (Pubitemid 20670585)
49. S. Soare, J.W. Yoon, and O. Cazacu On the use of homogeneous polynomials to develop anisotropic yield functions with applications to sheet forming Int. J. Plasticity 24 6 2008 915 944 (Pubitemid 351400625)
50. W.A. Spitzig, R.J. Sober, and O. Richmond The effect of hydrostatic pressure on the deformation behavior of maraging and HY-80 steels and its implications for plasticity theory Metall. Mater. Trans. A 7 10 1976 1543 1940
51. W.K. Thomson (Lord Kelvin) Elements of a mathematical theory of elasticity Philos. Trans. Roy. Soc. 166 1856 481
52. W.K. Thomson (Lord Kelvin) Elasticity, Encyclopaedia Britannica 1878 Adam and Charles Black Edinburgh
53. P.D. Wu, M. Jain, J. Savoie, S.R. MacEwen, P. Tugcu, and K.W. Neale Evaluation of anisotropic yield functions for aluminum sheets Int. J. Plasticity 19 1 2003 121 138 (Pubitemid 35264305)
54. J.W. Yoon, F. Barlat, K. Chung, F. Pourboghrat, and D.Y. Yang Earing predictions based on asymmetric nonquadratic yield function Int. J. Plasticity 16 2000 1075 1104
55. A.R. Zamiri, and F. Pourboghrat A novel yield function for single crystals based on combined constraints optimization Int. J. Plasticity 26 5 2010 731 746
56. A. Zamiri, F. Pourboghrat, and F. Barlat An effective computational algorithm for rate-independent crystal plasticity based on a single crystal yield surface with an application to tube hydroforming Int. J. Plasticity 23 7 2007 1126 1147 (Pubitemid 46498677)