Influence of sandblasting and hydrogen on tensile and fatigue properties of pipeline API 5L X52 steel

International Journal of Hydrogen Energy

Volumn 36, Issue 3, 2011, Pages 2291-2301

  Alhussein, A ^a   Capelle, J ^a   Gilgert, J ^a   Dominiak, S ^b   Azari, Z ^a  

^a UNIVERSITÉ DE LORRAINE   (France)

^b UNIVERSITÉ PAUL VERLAINE METZ   (France)

Author keywords

API 5L X52; Electrolytic hydrogen; FAD; Mechanical properties; Pipeline; Sandblasting erosion

Indexed keywords

ALUMINIUM OXIDE; API 5L X52; DEFORMATION FIELD; ELECTROLYTIC HYDROGEN; FAD; FAILURE ASSESSMENT DIAGRAM; FAILURE STRAIN; FRACTURE MECHANISMS; HYDROGEN ATOMS; MATERIAL DAMAGES; SANDBLASTING EROSION; STATIC PROPERTIES; SURFACE LAYERS; TENSILE AND FATIGUE PROPERTIES; ULTIMATE STRENGTH;

CRACKS; EROSION; FRACTURE; HYDROGEN; MECHANICAL PROPERTIES; PIPELINES; YIELD STRESS;

HYDROGEN EMBRITTLEMENT;

EID: 79551628607     PISSN: 03603199     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijhydene.2010.11.081     Document Type: Article

References (42)

1. F. Hasan, and J. Iqbal Consequential rupture of gas pipeline Eng Fail Anal 13 2006 127 135
2. S. Hattori, and E. Nakao Cavitation erosion mechanisms and quantitative evaluation based on erosion particles Wear 249 2002 839 845
3. R.J.K. Wood, Y. Puget, K.R. Trethewey, and K. Stokes The performance of marine coatings and pipe materials under fluid-borne sand erosion. Wear, 1998 pipe materials under fluid-borne sand erosion Wear 219 1998 46 59
4. S. Bouzid, A. Nyoungue, Z. Azari, N. Bouaouadja, and G. Pluvinage Fracture criterion for glass under impact loading Int J Impact Eng 25 2001 831 845
5. B. Bozzini, M.E. Ricotti, M. Boniadri, and C. Mele Evaluation of erosion-corrosion in multiphase flow via CFD and experimental analysis Wear 255 2003 237 245
6. A. Nyoungue, Z. Azari, M. Abbadi, S. Dominiak, and S. Hanim Glass damage by impact spallation Mater Sci Eng A 407 2005 256 264
7. K. Azouaoui, S. Rechak, Z. Azari, S. Benmedakhene, A. Laksimi, and G. Pluvinage Modelling of damage and failure of glass/epoxy composite plates subject to impact fatigue Int J Fatigue 23 2001 877 885
8. H.C. Meng, and K.C. Ludema Wear models and predictive equations: their form and content Wear 181-183 1995 443 457
9. I. Lillamand Evolution d'une couche grenaillée sous sollicitations thermiques et mécaniques, cas de la fatigue oligocyclique 1998 Thse ENSAM
10. M. Devignes Influence du grenaillage de précontrainte sur la tenue en fatigue de l'acier 35CD4 1987 Thse ENSAM
11. D. Kirk, and P.E. Render Effects of peening on stress corrosion cracking in carbon steel 1999 Proceedings of ICSP7 Warsaw, Poland
12. E.R. De Los Rios, M. Artamanov, C.A. Rodopoulos, P. Peyre, and A. Levers Proceedings of 4th International Committee on Aeronautical fatigue Toulouse 2001 pp. 25-29
13. L.D. Vo, and R.I. Stephens Effect of shot and laser peening on SAE 1010 steel tubes with a transverse center weld subjected to constant and variable amplitude loading 2009 Proceedings of 12th Int Conf on Fracture Canada
14. T.R.C. Fernandes Fengzhen Chen, Maria da Graa Carvalho. "HySociety" in support of European hydrogen projects and EC policy Int J Hydrogen Energy 30 2005 239 245
15. G. Mulder, J. Hetland, and G. Lenaers Towards a sustainable hydrogen economy: hydrogen pathways and infrastructure Int J Hydrogen Energy 32 2007 1324 1331
16. J.W. Hanneken Hydrogen in metals and other materials: a comprehensive reference to books, bibliographies, workshops and conferences Int J Hydrogen Energy 24 1999 1005 1026
17. R.-K. Dayal, and N. Parvathavarthini Hydrogen embrittlement in power plant steels Sadhana 28 2003 431 451
18. P. Sofronis, Y. Liang, and N. Aravas Hydrogen induced shear localisation of the plastic flow in metals and alloys Eur J Mechanics-A/Solids 20 2001 857 872
19. D. Delafosse, and T. Magnin Hydrogen induced plasticity in stress corrosion cracking of engineering systems Eng Fra Mechs 68 2001 693 729
20. E.A. Steigerwald, F.W. Schaller, and A.R. Traiano Trans Metall Soc AIME 218 1960 832
21. R.A. Oriani Corrosion 43 n 7 1987 390
22. D. Delafosse, B. Bayle, and C. Bosch The roles of crack-tip plasticity, anodic dissolution and hydrogen in SCC of mild and C-Mn steels Environment-Induced Cracking Mater 2008 267 278
23. L.J. Qiao, J.L. Luo, and X. Mao Corrosion 54 n 2 1998 115 120
24. E. Lunarska, Y. Ososkov, and Y. Jagodzinsky Correlation between critical hydrogen concentration and hydrogen damage of pipeline steel Int J Hydrogen Energy 22 1997 279 284
25. 3 solutions at different heat treatments Int J Hydrogen Energy 30 2005 1317 1322
26. X. Scoot Mao, and M. Li Mechanics and thermodynamics on the stress and hydrogen interaction in crack tip stress corrosion: experiment and theory J Mech Phys Solids 46 1998 1125 1137
27. G. Razzini, M. Cabrini, S. Maffi, G. Mussati, and L. Peraldo Bicelli Photoelectrochemical visualization in real-time of hydrogen distribution in plastic regions of low-carbon steel Corros Sci 41 1999 203 208
28. P. Bastien, and P. Azou Influence de l'écrouissage sur le frottement intérieur de fer et de l'acier, chargé ou non en hydrogne vol. 232 1951 C. R. Ac. Sc. Paris 1845
29. A. Brass, J. Chene, and L. Coudreuse Fragilisation des aciers par l'hydrogne: étude et prévention Les Techniques de l'Ingénieurs M175 2000
30. Y.F. Cheng Analysis of electrochemical hydrogen permeation through X-65 pipeline steel and its implications on pipeline stress corrosion cracking Int J Hydrogen Energy 32 2007 1269 1276
31. 4 aqueous solution using heterocyclic organic molecules Electrochim Acta 49 2004 4733 4741
32. J. Capelle, J. Gilgert, I. Dmytrakh, and G. Pluvinage Sensitivity of pipelines with steel API X52 to hydrogen embrittlement Int J Hydrogen Energy 33 2008 7630 7641
33. J. Capelle, I. Dmytrakh, and G. Pluvinage Comparative assessment of electrochemical hydrogen absorption by pipeline steels of different strength Corros Sci 52 2010 1554 1559
34. Nf A 03-001, NF EN 10002-1 Essai de traction, Partie 1: Méthode d'essai ( la température ambiante) 1990 AFNOR
35. H. Moustabchir, Z. Azari, S. Hariri, and I. Dmytrakh Experimental and numerical study of stress-strain state of pressurised cylindrical shells with external defects Eng Fail Anal 17 2010 506 514
36. M. Hadj Meliani, Z. Azari, G. Pluvinage, and Yu.G. Matvienko The effective T-stress estimation and crack paths emanating from U-notches Eng Fract Mechs 77 2010 1682 1692
37. M. Hadj Meliani, Z. Azari, G. Pluvinage, and J. Capelle Gouge assessment for pipes and associated transferability problem Eng Fail Anal 17 2010 1117 1126
38. Y. Zhongping, J. Zhaohua, S. Xuetong, X. Shigang, and W. Zhendong Influence of the frequency on the structure and corrosion resistance of ceramic coatings on Ti-6Al-4V alloy produced by micro-plasma oxidation Mater Chem Phys 92 2005 408 412
39. International Standard ISO 7539-9 Corrosion of metals and alloys - stress corrosion testing, part 9: preparation and use of pre-cracked specimens for tests under rising load or rising displacement 2003
40. Y.F. Cheng Fundamentals of hydrogen evolution reaction and its implications on near-neutral pH stress corrosion cracking of pipelines Electrochimica Acta 52 2007 2661 2667
41. J. Capelle, J. Gilgert, and G. Pluvinage A fatigue initiation parameter for gas pipe steel submitted to hydrogen absorption Int J Hydrogen Energy 35 2010 833 843
42. S. Bouzid, Z. Azari, S. Dominiack, and J. Gilgert Dhieb Glass damages caused by sand impact: evaluation of the eroded volume VERRE 9 3 2003 12 20