Fault-tolerant permanent magnet machines: A review

IET Electric Power Applications

Volumn 5, Issue 1, 2011, Pages 59-74

  El Refaie, A M ^a  

^a GE GLOBAL RESEARCH   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ACTIVE CONTROL METHODS; AUXILIARY WINDINGS; CONVERTER CONFIGURATIONS; FAULT-TOLERANT; FLUX-SWITCHING; HIGH EFFICIENCY; HIGH POWER DENSITY; HIGH RELIABILITY; MECHANICAL FLUX; MEMORY MOTORS; MORE ELECTRIC AIRCRAFT; PERMANENT-MAGNET MACHINE; PM MACHINES; REMEDIAL CONTROL; SAFETY CRITICAL APPLICATIONS; THERMAL PROTECTION; TRANSVERSE FLUX MACHINES;

ELECTRIC WINDINGS; FAULT TOLERANCE; MAGNETIC DEVICES; POWER CONVERTERS; QUALITY ASSURANCE;

PERMANENT MAGNETS;

EID: 79551612861     PISSN: 17518660     EISSN: 17518679     Source Type: Journal    
DOI: 10.1049/iet-epa.2009.0117     Document Type: Article

References (84)

1. Mecrow, B.C., Jack, A.G., Haylock, J.A., and Coles, J.: 'Fault-tolerant permanent-magnet machine drives', IEE Proc. Electr. Power Appl., 1996, 143, (6), p. 437-44210.1049/ip-epa:19960796 1350-2352
2. Haylock, J.A., Mecrow, B.C., Jack, A.G., and Atkinson, D.J.: 'Operation of fault tolerant machines with winding failures', IEEE Trans. Energy Convers., 1999, 14, (4), p. 1490-149510.1109/60.815095 0885-8969
3. Mitcham, A.J., Antonopoulos, G., and Cullen, J.J.A.: 'Implications of shorted turn faults in bar wound PM machines', IEE Proc. Electr. Power Appl., 2004, 151, (6), p. 651-65710.1049/ip-epa:20040686 1350-2352
4. Mitcham, A.J., Jack, A.G., Haylock, J.A., and Coles, J.: 'Favourable slot and pole combinations for fault-tolerant PM machines', IEE Proc. Electr. Power Appl., 2004, 151, (5), p. 520-52510.1049/ip-epa:20040584 1350-2352
5. Bianchi, N., Pre, M.D., Grezzani, G., and Bolognani, S.: 'Design considerations on fractional-slot fault-tolerant synchronous motors', Proc. 2005 IEEE Int. Conf. on Electrical Machines and Drives (IEMDC), San Antonio, TX 2005, CD-ROM
6. Haylock, J.A., Mecrow, B.C., Jack, A.G., Haylock, J.A., and Atkinson, D.J.: 'Operation of a fault tolerant PM drive for an aerospace fuel pump application', IEE Proc. Electr. Power Appl., 1998, 145, (5), p. 441-44810.1049/ip-epa:19982164 1350-2352
7. Mecrow, B.C., Jack, A.G., and Atkinson, D.J.: et al. 'Design and testing of a four-phase fault-tolerant permanent-magnet machine for an engine fuel pump', IEEE Trans. Energy Convers., 2004, 19, (4), p. 671-67810.1109/TEC.2004.832074 0885-8969
8. Atkinson, G.J., Mecrow, B.C., Jack, A.G., Atkinson, D.J., Sangha, P., and Benarous, M.: 'The analysis of losses in high-power fault-tolerant machines for aerospace applications', IEEE Trans. Ind. Appl., 2006, 42, (5), p. 1162-117010.1109/TIA.2006.880869 0093-9994
9. Bennett, J.W., Mecrow, B.C., and Jack, A.G.: et al. 'A prototype electrical actuator for aircraft flaps and slats', 2005 IEEE Int. Conf. on Electrical Machines and Drives, May 15-18 2005, p. 41-47
10. Bennett, J.W., Jack, A.G., Mecrow, B.C., Atkinson, D.J., Sewell, C., and Mason, G.: 'Fault-tolerant control architecture for an electrical actuator', IEEE 35th Power Electronics Specialists Conf., PESC'04, June 20-25 2004, p. 4371-4377
11. Chai, J., Wang, J., Atallah, K., and Howe, D.: 'Performance comparison and winding fault detection of duplex 2-phase and 3-phase fault-tolerant permanent magnet brushless machines', Conference record of the 2007 IEEE Industry Applications Conf. 2007, 42nd IAS Annual Meeting, September 23-27 2007, p. 566-572
12. Bianchi, N., Bolognani, S., and Pre, M.D.: 'Strategies for the fault-tolerant current control of a five-phase permanent-magnet motor', IEEE Trans. Ind. Appl., 2007, 43, (4), p. 960-97010.1109/TIA.2007.900445 0093-9994
13. Bianchi, N., Bolognani, S., and Pre, M.D.: 'Design and tests of a fault-tolerant five-phase permanent magnet motor', IEEE 37th Power Electronics Specialists Conf., PESC'06, June 18-22 2006, p. 1-8
14. Bianchi, N., Bolognani, S., and Pre, M.D.: 'Impact of stator winding of a five-phase motor on postfault operations', IEEE Trans. Ind. Electron., 2008, 55, (5), p. 1978-198710.1109/TIE.2008.920645 0278-0046
15. Bianchini, C., Fornasiero, E., Matzen, T., Bianchi, N., and Bellini, A.: 'Fault detection of a five-phase permanent-magnet machine', IEEE 34th Annual Industrial Electronics Conf., IECON'08, November 10-13 2008, p. 1200-1205
16. Bianchi, N., Bolognani, S., Pre, M.D., and Fornasiero, E.: 'Post-fault operations of five-phase motor using a full-bridge inverter', IEEE 39th Power Electronics Specialists Conf., PESC'08, June 15-19 2008, p. 2528-2534
17. Parsa, L., and Toliyat, H.: 'Five-phase permanent-magnet drives', IEEE Trans. Ind. Appl., 2005, 41, (1), p. 30-3710.1109/TIA.2004.841021 0093-9994
18. Parsa, L., and Toliyat, H.: 'Five-phase permanent magnet motor drives for ship propulsion applications'.', IEEE Electric Ship Technologies Symp., July 25-27 2005, p. 371-378
19. Parsa, L., Toliyat, H., and Goodarzi, A.: 'Five-phase interior permanent magnet motors with low torque pulsations', IEEE Trans. Ind. Appl., 2007, 43, (1), p. 40-4610.1109/TIA.2006.887235 0093-9994
20. Dwari, S., and Parsa, L.: 'An optimal control technique for multiphase PM machines under open-circuit faults', IEEE Trans. Ind. Electron., 2008, 55, (5), p. 1988-199510.1109/TIE.2008.920643 0278-0046
21. Dwari, S., and Parsa, L.: 'Disturbance free operation of permanent magnet motor drives under short circuit faults using center-split winding', Conference record of the 2007 IEEE Industry Applications Conf. 2007, 42nd IAS Annual Meeting, September 23-27 2007, p. 1329-1334
22. Dwari, S., and Parsa, L.: 'Optimum fault-tolerant control of multi-phase permanent magnet machines for open-circuit and short-circuit faults', 22nd Annual IEEE Applied Power Electronics Conf., 25 February-1 March 2007, p. 1417-1422
23. Dwari, S., Parsa, L., and Lipo, T.A.: 'Optimum control of a five-phase integrated modular permanent magnet motor under normal and open-circuit fault conditions', IEEE 38th Power Electronics Specialists Conf., PESC'07, June 17-21 2007, p. 1639-1644
24. Ouyang, W., and Lipo, T.A.: 'Multiphase modular permanent magnet drive system design and realization'', IEEE Int. Conf. on Electrical Machines and Drives, May 3-5 2007, p. 787-792
25. Locment, F., Semail, E., and Kestelyn, X.: 'Vectorial approach-based control of a seven-phase axial flux machine designed for fault operation', IEEE Trans. Ind. Electron., 2008, 55, (10), p. 3682-369110.1109/TIE.2008.925313 0278-0046
26. Locment, F., Semail, E., Kestelyn, X., and Bellini, A.: 'Control of a seven-phase axial flux machine designed for fault operation', IEEE 32nd Annual Industrial Electronics Conf., IECON'06, November 6-10 2006, p. 1101-1107
27. Bianchi, N., and Bolognani, S.: 'Fault-tolerant PM motors in automotive applications'. 2005', IEEE Vehicle Power and Propulsion Conf., September 7-9 2005, p. 747-755
28. Bianchi, N., Pre, M.D., and Bolognani, S.: 'Design of a fault-tolerant IPM motor for electric power steering', IEEE Trans. Veh. Technol., 2006, 55, (4), p. 1102-111110.1109/TVT.2006.877716 0018-9545
29. Benedetti, A., Bianchi, N., and Bolognani, S.: et al. 'PM motor drives for steer-by-wire applications', Conference record of the 2005 IEEE Industry Applications Conf., 2005, 40th IAS Annual Meeting, October 2-6 2005, p. 2857-2864
30. Parsa, L., and Toliyat, H.A.: 'Fault-tolerant interior permanent-magnet machines for hybrid electric vehicle applications', IEEE Trans. Veh. Technol., 2007, 56, (4), p. 1546-155210.1109/TVT.2007.896978 0018-9545
31. Bianchi, N., Bolognani, S., Zigliotto, M., and Zordan, M.: 'Innovative remedial strategies for inverter faults in IPM synchronous motor drives', IEEE Trans. Energy Convers., 2003, 18, (2), p. 306-31410.1109/TEC.2002.808334 0885-8969
32. Welchko, B.A., Lipo, T.A., Jahns, T.M., and Schulz, S.E.: 'Fault-tolerant three-phase AC motor drive topologies: a comparison of features, cost, and limitations', IEEE Trans. Power Electron., 2004, 19, (4), p. 1108-111610.1109/TPEL.2004.830074 0885-8993
33. Bennett, J.W., Mecrow, B.C., and Atckinson, A.G.: et al. 'Choice of drive topologies for electrical actuation of aircraft flaps and slats'. Second Int', Conf. on Power Electronics, Machines, and Drives, PEMD'04, 31 March-2 April 2004, p. 332-337
34. Argille, R.N., Mecrow, B.C., Atckinson, A.G., Atkinson, D.J., and Sangha, P.: 'Reliability analysis of fault tolerant drive topologies', Fourth IET Conf. on Power Electronics, Machines, and Drives, PEMD, April 2-4 2008, p. 11-15
35. Green, S., Atkinson, D.J., Mecrow, B.C., Jack, A.G., and Green, B.: 'Fault tolerant, variable frequency, unity power factor converters for safety critical PM drives', IEE Proc. Electr. Power Appl., 2003, 150, (6), p. 663-67210.1049/ip-epa:20030911 1350-2352
36. Welchko, B.A., Jahns, T.M., and Lipo, T.A.: 'Fault interrupting methods and topologies for interior PM machine drives', IEEE Power Electron. Lett., 2004, 2, (4), p. 139-14310.1109/LPEL.2004.841494 1540-7985
37. Welchko, B.A., Wai, J., Jahns, T.M., and Lipo, T.A.: 'Magnet-fluxing control of interior PM machine drives for improved steady-state response to short-circuit faults', IEEE Trans. Ind. Appl., 2006, 42, (1), p. 113-12010.1109/TIA.2005.861313 0093-9994
38. Welchko, B.A., Jahns, T.M., and Lipo, T.A.: 'Short-circuit fault mitigation methods for interior PM synchronous machine drives using six-leg inverters', IEEE 35th Power Electronics Specialists Conf., PESC'04, June 20-25 2004, p. 2133-2139
39. Ostovic, V.: 'Memory motors', IEEE Ind. Appl. Mag., 2003, 9, (1), p. 52-6110.1109/MIA.2003.1176459 1077-2618
40. Ostovic, V.: 'Field control in PM machine', (US6800977 B1)
41. Liao, Y., Liang, F., and Lipo, T.A.: 'A novel permanent magnet motor with doubly salient structure', Record of 1992 IEEE Industry Applications Society Annual Meeting, October 1992, 1, p. 308-314
42. Shakal, A., Liao, Y., and Lipo, T.A.: 'A permanent magnet AC machine structure with true field weakening capability', Proc. IEEE Int. Symp. on Industrial Electronics, ISIE'93, June 1993, p. 19-24
43. Lipo, T.A., and Li, Y.: 'CFMs - a new family of electrical machines', JESC'95, Japan, 1995, p. 1-6
44. Li, Y., and Lipo, T.A:: 'A doubly salient permanent magnet motor capable of field weakening', Record of 1995 IEEE Power Electronics Specialists Conf., June 1995, 1, p. 565-571
45. Lipo, T.A., Li, T., and Sarlioglu, B.: 'Doubly salient permanent magnet machines - a progress report', IEEE Int. Symp. on Electric Power Engineering, Stockholm, June 1995
46. Luo, X., Qin, D., and Lipo, T.A.: 'A novel two phase doubly salient permanent magnet motor', Record of 1996 IEEE Industry Applications Society Annual Meeting, October 1996, 2, p. 808-815
47. Leonardi, F., Matsuo, T., Li, Y., Lipo, T.A., and McCleer, P.: 'Design considerations and test results for a doubly salient PM motor with flux control', Record of 1996 IEEE Industry Applications Society Annual Meeting, October 1996, 1, p. 458-463
48. Chau, K.T., Jiang, J.Z., and Wang, Y.: 'A novel stator doubly fed doubly salient permanent magnet brushless machine', IEEE Trans. Magn., 2003, 39, p. 373-37810.1109/TMAG.2003.816722 0018-9464
49. Hua, W., Cheng, M., Jia, H., and Fu, X.: 'Comparative study of flux-switching and doubly-salient PM machines particularly on torque capability', Record of 2008 IEEE Industry Applications Society Annual Meeting, October 2008, 1, p. 1-8
50. Cheng, Y., Pollock, C., and Pollock, H.: 'A permanent magnet flux switching motor for low energy axial fans', Record of 2005 IEEE Industry Applications Society Annual Meeting, October 2005, 3, p. 2168-2175
51. Pollock, H., Pollock, C., Walter, R.T., and Gorti, B.V.: 'Low cost, high power density, flux switching machines and drives for power tools', Record of 2003 IEEE Industry Applications Society Annual Meeting, October 2003, 3, p. 1451-1457
52. Pollock, C., Pollock, H., and Barron, R.: et al. 'Flux switching motors for automotive applications', Record of 2005 IEEE Industry Applications Society Annual Meeting, October 2005, 1, p. 242-249
53. Zhao, W., Cheng, M., Hua, W., and Jia, H.: 'A redundant flux-switching permanent magnet motor drive for fault-tolerant applications', Record of 2008 Vehicle Power and Propulsion Conf., September 2008, 1, p. 1-6
54. Thomas, A.S., Zhu, Z.Q., Owen, R.L., Jewell, G.W., and Howe, D.: 'Multi-phase flux-switching permanent magnet brushless machine for aerospace application', Record of 2005 IEEE Industry Applications Society Annual Meeting, October 2005, 1, p. 1-8
55. Akemakou, A.D.: 'Double-excitation rotating electrical machine for adjustable defluxing', (US26119206A1)
56. Horst, G.E.: 'Flux controlled permanent magnet dynamo-electric', (US05530307)
57. Rao, G.P., Kirtley, Jr J.L., Meeker, D.C., and Donegan, K.J.: 'Hybrid permanent magnet/homopolar generator motor', (US6097124)
58. Tapia, J.A., Leonardi, F., and Lipo, T.A.: 'Consequent-pole permanent-magnet machine with extended field-weakening capability', IEEE Trans. Ind. Appl., 2003, 39, p. 1704-170910.1109/TIA.2003.818993 0093-9994
59. Aydin, M., Huang, S.H., and Lipo, T.A.: 'A new axial flux surface mounted permanent magnet machine capable of field control', Record of 2002 IEEE Industry Applications Society Annual Meeting, October 2002, 2, p. 1250-1257
60. Miller, J.M.: 'Hybrid electric machine with two rotors, PM poles and controllable field current', (US6531799)
61. Kusase, S., and Mukai, T.: 'Brushless rotary electric machine having tandem rotary cores', (US2003/0102758)
62. Syverson, C.D.: 'Hybrid alternator', (US5397975)
63. Wada, A., and Kimoto, S.: 'High speed generator', (JP55061265A)
64. Dooley, K.A.: 'Architecture for electric machine', (US2004/0239202)
65. Caricchi, F., Crescimbini, F., Caponi, F.G., and Solero, L.: 'Permanent-magnet, direct-drive, starter/alternator with weakened flux linkage for constant-power operation over extremely wide speed range', Record of 2001 IEEE Industry Applications Society Annual Meeting, October 2001, 3, p. 1626-1633
66. Masuzawa, M., Hirao, N., Sasaki, T., and Mita, M.: 'Brushless motor having permanent magnets', (US5821710)
67. Raad, B., and Kasdan, L.: 'Regulatable permanent magnet generator', (US6455975 B1)
68. Dooley, K., and Dowhan, M.: 'Method and apparatus for controlling an electric machine', (US20040251765A1)
69. Dooley, K.A.: 'Brushless PM motor or alternator with variable axial rotor/stator alignment to increase speed capability', (US6555941)
70. Lipo, T.A., and Aydin, M.: 'Field weakening of permanent magnet machines - design approaches', Power Electronics and Motion Control Conf., EPE-PEMC'04, Riga, Latvia, September 2004
71. Glenon, T.F., Olson, R.N., and Straznickas, D.A.: 'Permanent magnet generator with fault detection', (US4641080)
72. McCabria, J.L.: 'PM alternator power generation system', (US4691119)
73. Franco, A., Mcgarvey, J., Kane, D., and Salata, M.: 'Flux shunt wave shape control arrangement for PM machines', (US06750628)
74. Sadvary, J.W.: 'Regulatable permanent magnet alternator', (US04766362)
75. Hideo, K., and Mitsunobu, K.: 'Magnetic flux control type dynamo', (JP2004328944A)
76. Dooley, K.A.: 'Method apparatus and system for controlling an electric machine', (US2004/0245869A1)
77. Keizo H., TOSHIBA CORPORATION: 'Liquid-cooled electromagnetic machine'. JP2000236649A2, 29 August 2000
78. Chen, A., Nilssen, R., and Nysveen, A.: 'Performance comparisons among radial flux, multi-stage axial flux and three-phase transverse flux PM machines for downhole applications', IEEE Trans. Ind. Appl., 2010, 46, (2), p. 779-78910.1109/TIA.2009.2039914 0093-9994
79. Guo, Y.G., Zhu, J.G., Watterson, P.A., and Wu, W.: 'Comparative study of 3-D flux electrical machines with soft magnetic composite cores', IEEE Trans. Ind. Appl., 2003, 39, (6), p. 1696-170310.1109/TIA.2003.818990 0093-9994
80. Bang, Deok-je, Polinder H. Shrestha, G., and Ferreira, J.A.: 'Comparative design of radial and transverse flux PM generators for direct-drive wind turbines', 18th Int. Conf. on Electrical Machines, ICEM 2008, September 6-9 2008, p. 1-6
81. Baserrah, S., Rixen, K., and Orlik, Bernd: 'Transverse flux machines with distributed windings for in-wheel applications', Int. Conf. on Power Electronics and Drive Systems, PEDS, January 2-5 2009, p. 102-108
82. Gieras, J.F.: 'Performance characteristics of a transverse flux generator', IEEE Int. Conf. on Electric Machines and Drives, May 15 2005, p. 1293-1299
83. Mitcham, A.J.: 'Transverse flux motors for electric propulsion of ships', IEE Colloquium on New Topologies for Permanent Magnet Machines (Digest No: 1997/090), June 18 1997, p. 3/1-3/6
84. Husband, S.M., and Hodge, C.G.: 'The Rolls-Royce transverse flux motor development', IEEE Int. Electric Machines and Drives Conf., IEMDC'03, 2003, 3, p. 1435-1440