Fault-tolerant PM motors in automotive applications

2005 IEEE Vehicle Power and Propulsion Conference, VPPC

Volumn 2005, Issue , 2005, Pages 747-755

  Bianchi, Nicola ^a   Bolognani, Silverio ^a  

^a UNIVERSITY OF PADOVA   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

AUTOMOTIVE ENGINEERING; BRAKING; ELECTRIC CURRENTS; PERMANENT MAGNETS; TORQUE CONTROL;

AUTOMOTIVE APPLICATIONS; FAULT-TOLERANT CAPABILITY; PERMANENT MAGNET MOTORS; SHORT-CIRCUIT CURRENTS;

ELECTRIC MOTORS;

EID: 33847070036     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/VPPC.2005.1554642     Document Type: Conference Paper

References (33)

1. D. Iles-Klumpner, "Automotive permanent magnet brushless actuation technologies," Ph.D. Thesis, (supervisor: Prof. I. Boldea), University Politechnica of Timisoara, Faculty of Electrical Engineering, 2005.
2. D. Diallo, M. Benbouzid, and A. Makouf, "A fault tolerant control architecture for induction motor drives in automotive applications," IEEE Transactions on Vehicular Technology, vol. 53, no. 6, pp. 1847-1855, November 2004.
3. S. Mir, M. Islam, and T.Sebastian, "Role of electronics and controls in steering system," Records of the 29th IEEE Annual Conference of the IEEE Industrial Electronics Society, IECON, November 2-6 Roanoke, 2003.
4. A. Jack, B. Mecrow, and J. Haylock, "A comparative study of permanent magnet and switched reluctance motors for high-performance fault-tolerant applications," IEEE Trans. on Industry Applications, vol. IA-32, no. 4, pp. 889-895, July/Aug 1996.
5. T. M. Jahns, "Improved reliability in solid state a.c. drives by means of multiple independent phase-drive units," IEEE Trans. on Industry Applications, vol. IA-16, no. 3, pp. 321-331, May 1980.
6. J. Haylock, B. Mecrow, A. Jack, and D. Atkinson, "Operation of fault tolerant pm drive for an aerospace fuel pump application," IEE Proc. - Electr. Power Appl., vol. 145, no. 5, pp. 441-448, Sept. 1998.
7. H. Murakami, H.Kataoka, Y.Honda, S.Morimoto, and Y.Takeda, "Highly efficient brushless motor design for an air-conditioner of the next generation 42v vehicle," Proc. of IEEE Industry Applications Annual Meeting, vol. I, October 2001 Chicago,.
8. B. Mecrow, A. Jack, D. Atkinson, G. Atkinson, A. King, and B. Green, "Design and testing of a four-phase fault-tolerant permanent-magnet machine for an engine fuel pump," IEEE Trans. on Enegy Conversion, vol. 19, no. 4, pp. 671-678, December 2004.
9. N. Bianchi, S.Bolognani, and G. Grezzani, "Fractional-slot ipm servo-motors: analysis and performance comparisons," in Proc. of International Conference on Electrical Machines, ICEM'05, 5-8 Sept. 2004.
10. T. Jahns and V. Caliskan, "Uncontrolled generator operation of interior pm synchronous machines following high-speed inverter shutdown," IEEE Trans. on Industry Applications, vol. 35, Nov/Dec 1999.
11. B. Mecrow, A. Jack, and J. Haylock, "Fault-tolerant permanent-magnet machine drives," IEE Proc., Electr. Power Applications, vol. 143, no. 6, pp. 437-442, Dec. 1996.
12. N. Bianchi and S. Bolognani, "Parameters and volt-ampere ratings of synchronous motor drive for flux-weakening applications," IEEE Transactions on Power Electronics, vol. 12, Dec 1997.
13. B. Welchko, T. Jahns, W. Soong, and J. Nagashima, "Ipm synchronous machine drive response to symmetrical and asymmetrical short circuit faults," IEEE Transactions on Energy Conversion, vol. EC-18, Jun. 2003.
14. N. Bianchi, M. D. Pré, G. Grezzani, and S.Bolognani, "Design considerations on fractional-slot fault-tolerant synchronous motors," in Proc. of IEEE International Electrical Machines and Drives Conference, IEMDC'05, 14-18 May 2005.
15. M. Lazzari and P. Ferrari, "Phase number and their related effects on the characteristics of inverter-fed induction motor drives," in Conf. Rec. of IEEE Industry Applications Annual Meeting, IAS'83, vol. I, Mexico City, Mexico, October 1983, pp. 494-502.
16. G.K. Singh and V. Pant, "Analysis of a multiphase induction machine under fault condition in a phase-redundant ac drive system," Electric Machines and Power Systems, vol. 28, no. 6, pp. 577-590, Dec. 2000.
17. M. Abbas, R. Christen, and T. Jahns, "Six-phase voltage source inverter driven induction motor," IEEE Transaction on Industry Applications, vol. IA-20, no. 5, pp. 1251-1259, Sept./Oct. 1984.
18. L. Parsa and H. Toliyat, "Fault-tolerant five-phase permanent-magnet motor drives," Proc. of IEEE Industry Applications Annual Meeting, 3-7 October 2004.
19. L. Parsa and H. Toliyat, "Five-phase permanent-magnet motor drives," vol. 41, no. 1, Jan/Feb 2005, pp. 30-37.
20. D. Hadiouche, H. Razik, and A. Rezzoug, "Modeling of a double star induction motor for space vector pwm control," Proceedings of International Conference on Electrical Machines, ICEM, Aug. Helsinki, 2000.
21. Y. Zhao and T. Lipo, "Space vector pwm control of dual three-phase induction machine using vector space decomposition," IEEE Transactions on Industry Applications, vol. 31, no. 5, pp. 1100-1108, Sept./Oct. 1995.
22. B. Welchko, T. Lipo, T.M.Jahns, and S. Schulz, "Fault tolerant three-phase ac motor drive topologies: A comparison of features, cost, and limitations," IEEE Trans. on Power Electronics, vol. PE-19, no. 4, pp. 1108-1116, July 2004.
23. N. Bianchi, S. Bolognani, and M. Zigliotto, "Analysis of pm synchronous motor drive failures during flux weakening operation," Proc. Power Electronics Specialists Conference, PESC, vol. 2, June Baveno, 1996.
24. R. Ribero, C. Jacobina, E. da Silva, and A. Lima, "A fault tolerant induction motor drive system by using a compensation strategy on the pwm-vsi topology," in Proc. of the IEEE Power Electronics Specialist Conference, PESC'01, vol. 2, Vancouver, June 2001, pp. 1191-1196.
25. N. Bianchi, M. D. Pré, and S.Bolognani, "Design of a fault-tolerant ipm motor for electric power steering," in Proc. of IEEE Power Electronics Specialist Conference, PESC'05, 12-16 June 2005.
26. W. Soong, N. Ertugrul, E. Lovelace, and T. Jahns, "Investigation of interior permanent magnet offset-coupled automotive integrated starter/alternator," Rec. IEEE Ind. Appl. Soc. Annual Meeting, vol. 1, Oct Chicago, 2001.
27. T. Jahns, Design, Analysis, and Control of Interior PM Synchronous Machines (N. Bianchi, T.M. Jahns editors). IEEE IAS Tutorial Course notes, IAS Annual Meeting, CLEUP, Seattle, October 3, 2005, ch. Fault-mode operation, pp. 10.1-10.21.
28. N. Bianchi and S. Bolognani, "Design techniques for reducing the cogging torque in surface-mounted PM motors," IEEE Trans. on Industry Applications, vol. 38, no. 5, pp. 1259-1265, 2002.
29. N. Bianchi and S. Bolognani, "Reducing torque ripple in pm synchronous motors by pole shifting," Proceedings of International Conference on Electrical Machines, ICEM, Aug. Helsinki, 2000.
30. M. Islam, S. Mir, and T.Sebastian, "Issues in reducing the cogging torque of mass-produced permanent magnet brushless dc motor," Records of the 38th IEEE Ind. App. Annu. Meeting, October 12-16 Salt Lake City, 2003.
31. T. Jahns and W. L. Soong, "Pulsating torque minimization techniques for permanent magnet ac motor drives a review," IEEE Trans. on Industrial Electronics, vol. IE-43, no. 2, pp. 321-330, April 1996.
32. A. Fratta, G. Troglia, A. Vagati, and F. Villata, "Evaluation of torque ripple in high performance synchronous reluctance machines," Records of IEEE Industry Application Society Annual Meeting, vol. I, pp. 163-170, October Toronto, Canada, 1993.
33. A. Vagati, M. Pastorelli, G. Franceschini, and S. Petrache, "Design of low-torque-ripple synchronous reluctance motors," IEEE Trans. on Industry Application, vol. IA-34, no. 4, pp. 758-765, July-Aug. 1998.